[v3 07/15] powerpc/perf: Add power10_feat to dt_cpu_ftrs
Jordan Niethe
jniethe5 at gmail.com
Wed Jul 22 20:49:57 AEST 2020
On Wed, Jul 22, 2020 at 5:55 PM Athira Rajeev
<atrajeev at linux.vnet.ibm.com> wrote:
>
>
>
> On 22-Jul-2020, at 10:11 AM, Jordan Niethe <jniethe5 at gmail.com> wrote:
>
> On Sat, Jul 18, 2020 at 1:13 AM Athira Rajeev
> <atrajeev at linux.vnet.ibm.com> wrote:
>
>
> From: Madhavan Srinivasan <maddy at linux.ibm.com>
>
> Add power10 feature function to dt_cpu_ftrs.c along
> with a power10 specific init() to initialize pmu sprs,
> sets the oprofile_cpu_type and cpu_features. This will
> enable performance monitoring unit(PMU) for Power10
> in CPU features with "performance-monitor-power10".
>
> For PowerISA v3.1, BHRB disable is controlled via Monitor Mode
> Control Register A (MMCRA) bit, namely "BHRB Recording Disable
> (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
> feature at boot for power10.
>
> Signed-off-by: Madhavan Srinivasan <maddy at linux.ibm.com>
> ---
> arch/powerpc/include/asm/reg.h | 3 +++
> arch/powerpc/kernel/cpu_setup_power.S | 8 ++++++++
> arch/powerpc/kernel/dt_cpu_ftrs.c | 26 ++++++++++++++++++++++++++
> 3 files changed, 37 insertions(+)
>
> diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
> index 21a1b2d..900ada1 100644
> --- a/arch/powerpc/include/asm/reg.h
> +++ b/arch/powerpc/include/asm/reg.h
> @@ -1068,6 +1068,9 @@
> #define MMCR0_PMC2_LOADMISSTIME 0x5
> #endif
>
> +/* BHRB disable bit for PowerISA v3.10 */
> +#define MMCRA_BHRB_DISABLE 0x0000002000000000
>
> Shouldn't this go under SPRN_MMCRA with the other MMCRA_*.
>
>
>
> Hi Jordan
>
> Ok, the definition of MMCRA is under #ifdef for 64 bit . if I move definition of MMCRA_BHRB_DISABLE along with other SPR's, I also
> need to define this for 32-bit to satisfy core-book3s to compile as below:
>
> diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
> index 900ada10762c..7e271657b412 100644
> --- a/arch/powerpc/include/asm/reg.h
> +++ b/arch/powerpc/include/asm/reg.h
> @@ -888,6 +888,8 @@
> #define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */
> #define MMCRA_SLOT_SHIFT 24
> #define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
> +/* BHRB disable bit for PowerISA v3.10 */
> +#define MMCRA_BHRB_DISABLE 0x0000002000000000
> #define POWER6_MMCRA_SDSYNC 0x0000080000000000ULL /* SDAR/SIAR synced */
> #define POWER6_MMCRA_SIHV 0x0000040000000000ULL
> #define POWER6_MMCRA_SIPR 0x0000020000000000ULL
> @@ -1068,9 +1070,6 @@
> #define MMCR0_PMC2_LOADMISSTIME 0x5
> #endif
>
>
>
> -/* BHRB disable bit for PowerISA v3.10 */
> -#define MMCRA_BHRB_DISABLE 0x0000002000000000
> -
> /*
> * SPRG usage:
> *
> diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
> index 36baae666387..88068f20827c 100644
> --- a/arch/powerpc/perf/core-book3s.c
> +++ b/arch/powerpc/perf/core-book3s.c
> @@ -94,6 +94,7 @@ static unsigned int freeze_events_kernel = MMCR0_FCS;
> #define SPRN_SIER2 0
> #define SPRN_SIER3 0
> #define MMCRA_SAMPLE_ENABLE 0
> +#define MMCRA_BHRB_DISABLE 0
>
>
>
> static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
> {
>
>
>
> +
> /*
> * SPRG usage:
> *
> diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
> index efdcfa7..b8e0d1e 100644
> --- a/arch/powerpc/kernel/cpu_setup_power.S
> +++ b/arch/powerpc/kernel/cpu_setup_power.S
> @@ -94,6 +94,7 @@ _GLOBAL(__restore_cpu_power8)
> _GLOBAL(__setup_cpu_power10)
> mflr r11
> bl __init_FSCR_power10
> + bl __init_PMU_ISA31
>
> So we set MMCRA here but then aren't we still going to call __init_PMU
> which will overwrite that?
> Would this setting MMCRA also need to be handled in __restore_cpu_power10?
>
>
> Thanks for this nice catch ! When I rebased code initial phase, we didn’t had power10 part filled in.
> It was a miss from my side in adding PMu init functions and thanks for pointing this out.
> Below patch will call __init_PMU functions in setup and restore. Please check if this looks good
>
> --
> diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
> index efdcfa714106..e672a6c5fd7c 100644
> --- a/arch/powerpc/kernel/cpu_setup_power.S
> +++ b/arch/powerpc/kernel/cpu_setup_power.S
> @@ -94,6 +94,9 @@ _GLOBAL(__restore_cpu_power8)
> _GLOBAL(__setup_cpu_power10)
> mflr r11
> bl __init_FSCR_power10
> + bl __init_PMU
> + bl __init_PMU_ISA31
> + bl __init_PMU_HV
> b 1f
>
> _GLOBAL(__setup_cpu_power9)
Won't you also need to change where the label 1 is:
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -100,8 +100,8 @@ _GLOBAL(__setup_cpu_power10)
_GLOBAL(__setup_cpu_power9)
mflr r11
bl __init_FSCR
-1: bl __init_PMU
- bl __init_hvmode_206
+ bl __init_PMU
+1: bl __init_hvmode_206
mtlr r11
beqlr
li r0,0
> @@ -124,6 +127,9 @@ _GLOBAL(__setup_cpu_power9)
> _GLOBAL(__restore_cpu_power10)
> mflr r11
> bl __init_FSCR_power10
> + bl __init_PMU
> + bl __init_PMU_ISA31
> + bl __init_PMU_HV
> b 1f
>
> _GLOBAL(__restore_cpu_power9)
> @@ -233,3 +239,10 @@ __init_PMU_ISA207:
> li r5,0
> mtspr SPRN_MMCRS,r5
> blr
> +
> +__init_PMU_ISA31:
> + li r5,0
> + mtspr SPRN_MMCR3,r5
> + LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)
> + mtspr SPRN_MMCRA,r5
> + blr
>
> —
>
> b 1f
>
> _GLOBAL(__setup_cpu_power9)
> @@ -233,3 +234,10 @@ __init_PMU_ISA207:
> li r5,0
> mtspr SPRN_MMCRS,r5
> blr
> +
> +__init_PMU_ISA31:
> + li r5,0
> + mtspr SPRN_MMCR3,r5
> + LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)
> + mtspr SPRN_MMCRA,r5
> + blr
> diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
> index 3a40951..f482286 100644
> --- a/arch/powerpc/kernel/dt_cpu_ftrs.c
> +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
> @@ -450,6 +450,31 @@ static int __init feat_enable_pmu_power9(struct dt_cpu_feature *f)
> return 1;
> }
>
> +static void init_pmu_power10(void)
> +{
> + init_pmu_power9();
> +
> + mtspr(SPRN_MMCR3, 0);
> + mtspr(SPRN_MMCRA, MMCRA_BHRB_DISABLE);
> +}
> +
> +static int __init feat_enable_pmu_power10(struct dt_cpu_feature *f)
> +{
> + hfscr_pmu_enable();
> +
> + init_pmu_power10();
> + init_pmu_registers = init_pmu_power10;
> +
> + cur_cpu_spec->cpu_features |= CPU_FTR_MMCRA;
> + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_PSERIES_PERFMON_COMPAT;
> +
> + cur_cpu_spec->num_pmcs = 6;
> + cur_cpu_spec->pmc_type = PPC_PMC_IBM;
> + cur_cpu_spec->oprofile_cpu_type = "ppc64/power10";
> +
> + return 1;
> +}
> +
> static int __init feat_enable_tm(struct dt_cpu_feature *f)
> {
> #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
> @@ -639,6 +664,7 @@ struct dt_cpu_feature_match {
> {"pc-relative-addressing", feat_enable, 0},
> {"machine-check-power9", feat_enable_mce_power9, 0},
> {"performance-monitor-power9", feat_enable_pmu_power9, 0},
> + {"performance-monitor-power10", feat_enable_pmu_power10, 0},
> {"event-based-branch-v3", feat_enable, 0},
> {"random-number-generator", feat_enable, 0},
> {"system-call-vectored", feat_disable, 0},
> --
> 1.8.3.1
>
>
More information about the Linuxppc-dev
mailing list