[PATCH v2 05/14] powerpc/eeh: Kill off eeh_ops->get_pe_addr()

[Oliver O'Halloran]

This is used in precisely one place which is in pseries specific platform
code.  There's no need to have the callback in eeh_ops since the platform
chooses the EEH PE addresses anyway. The PowerNV implementation has always
been a stub too so remove it.

Signed-off-by: Oliver O'Halloran <oohall at gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik at ozlabs.ru>
---
v2: Made "buid" in pseries_eeh_get_pe_addr() an unsigned long to match
    the pci_controller type.
---
 arch/powerpc/include/asm/eeh.h               |  1 -
 arch/powerpc/platforms/powernv/eeh-powernv.c | 13 ------------
 arch/powerpc/platforms/pseries/eeh_pseries.c | 22 ++++++++++----------
 3 files changed, 11 insertions(+), 25 deletions(-)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 9c5ba535f6a1..d619012281bd 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -220,7 +220,6 @@ struct eeh_ops {
 	int (*init)(void);
 	struct eeh_dev *(*probe)(struct pci_dev *pdev);
 	int (*set_option)(struct eeh_pe *pe, int option);
-	int (*get_pe_addr)(struct eeh_pe *pe);
 	int (*get_state)(struct eeh_pe *pe, int *delay);
 	int (*reset)(struct eeh_pe *pe, int option);
 	int (*get_log)(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 79409e005fcd..bcd0515d8f79 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -535,18 +535,6 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
 	return 0;
 }
 
-/**
- * pnv_eeh_get_pe_addr - Retrieve PE address
- * @pe: EEH PE
- *
- * Retrieve the PE address according to the given tranditional
- * PCI BDF (Bus/Device/Function) address.
- */
-static int pnv_eeh_get_pe_addr(struct eeh_pe *pe)
-{
-	return pe->addr;
-}
-
 static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
 {
 	struct pnv_phb *phb = pe->phb->private_data;
@@ -1670,7 +1658,6 @@ static struct eeh_ops pnv_eeh_ops = {
 	.init                   = pnv_eeh_init,
 	.probe			= pnv_eeh_probe,
 	.set_option             = pnv_eeh_set_option,
-	.get_pe_addr            = pnv_eeh_get_pe_addr,
 	.get_state              = pnv_eeh_get_state,
 	.reset                  = pnv_eeh_reset,
 	.get_log                = pnv_eeh_get_log,
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 18a2522b9b5e..bcc72b9a5309 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -32,6 +32,8 @@
 #include <asm/ppc-pci.h>
 #include <asm/rtas.h>
 
+static int pseries_eeh_get_pe_addr(struct pci_dn *pdn);
+
 /* RTAS tokens */
 static int ibm_set_eeh_option;
 static int ibm_set_slot_reset;
@@ -301,7 +303,7 @@ void pseries_eeh_init_edev(struct pci_dn *pdn)
 		eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret);
 	} else {
 		/* Retrieve PE address */
-		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
+		edev->pe_config_addr = pseries_eeh_get_pe_addr(pdn);
 		pe.addr = edev->pe_config_addr;
 
 		/* Some older systems (Power4) allow the ibm,set-eeh-option
@@ -431,8 +433,10 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
  * It's notable that zero'ed return value means invalid PE config
  * address.
  */
-static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
+static int pseries_eeh_get_pe_addr(struct pci_dn *pdn)
 {
+	int config_addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
+	unsigned long buid = pdn->phb->buid;
 	int ret = 0;
 	int rets[3];
 
@@ -443,18 +447,16 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
 		 * meaningless.
 		 */
 		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-				pe->config_addr, BUID_HI(pe->phb->buid),
-				BUID_LO(pe->phb->buid), 1);
+				config_addr, BUID_HI(buid), BUID_LO(buid), 1);
 		if (ret || (rets[0] == 0))
 			return 0;
 
 		/* Retrieve the associated PE config address */
 		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-				pe->config_addr, BUID_HI(pe->phb->buid),
-				BUID_LO(pe->phb->buid), 0);
+				config_addr, BUID_HI(buid), BUID_LO(buid), 0);
 		if (ret) {
 			pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
-				__func__, pe->phb->global_number, pe->config_addr);
+				__func__, pdn->phb->global_number, config_addr);
 			return 0;
 		}
 
@@ -463,11 +465,10 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
 
 	if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
-				pe->config_addr, BUID_HI(pe->phb->buid),
-				BUID_LO(pe->phb->buid), 0);
+				config_addr, BUID_HI(buid), BUID_LO(buid), 0);
 		if (ret) {
 			pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
-				__func__, pe->phb->global_number, pe->config_addr);
+				__func__, pdn->phb->global_number, config_addr);
 			return 0;
 		}
 
@@ -839,7 +840,6 @@ static struct eeh_ops pseries_eeh_ops = {
 	.init			= pseries_eeh_init,
 	.probe			= pseries_eeh_probe,
 	.set_option		= pseries_eeh_set_option,
-	.get_pe_addr		= pseries_eeh_get_pe_addr,
 	.get_state		= pseries_eeh_get_state,
 	.reset			= pseries_eeh_reset,
 	.get_log		= pseries_eeh_get_log,
-- 
2.26.2