OF: Can't handle multiple dma-ranges with different offsets

[Chris Packham]

Hi,

I've just fired up linux kernel v5.7 on a p2040 based system and I'm 
getting the following new warning

OF: Can't handle multiple dma-ranges with different offsets on 
node(/pcie at ffe202000)
OF: Can't handle multiple dma-ranges with different offsets on 
node(/pcie at ffe202000)

The warning itself was added in commit 9d55bebd9816 ("of/address: 
Support multiple 'dma-ranges' entries") but I gather it's pointing out 
something about the dts. My boards dts is based heavily on p2041rdb.dts 
and the relevant pci2 section is identical (reproduced below for reference).

     pci2: pcie at ffe202000 {
         reg = <0xf 0xfe202000 0 0x1000>;
         ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
               0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
         pcie at 0 {
             ranges = <0x02000000 0 0xe0000000
                   0x02000000 0 0xe0000000
                   0 0x20000000

                   0x01000000 0 0x00000000
                   0x01000000 0 0x00000000
                   0 0x00010000>;
         };
     };

I haven't noticed any ill effect (aside from the scary message). I'm not 
sure if there's something missing in the dts or in the code that checks 
the ranges. Any guidance would be appreciated.

Thanks,
Chris