[PATCH v2 07/10] powerpc/perf: support BHRB disable bit and new filtering modes

[Athira Rajeev]

> On 08-Jul-2020, at 1:13 PM, Gautham R Shenoy <ego at linux.vnet.ibm.com> wrote:
> 
> On Tue, Jul 07, 2020 at 05:17:55PM +1000, Michael Neuling wrote:
>> On Wed, 2020-07-01 at 05:20 -0400, Athira Rajeev wrote:
>>> PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB).
>>> First is the addition of BHRB disable bit and second new filtering
>>> modes for BHRB.
>>> 
>>> BHRB disable is controlled via Monitor Mode Control Register A (MMCRA)
>>> bit 26, namely "BHRB Recording Disable (BHRBRD)". This field controls
>>> whether BHRB entries are written when BHRB recording is enabled by other
>>> bits. Patch implements support for this BHRB disable bit.
>> 
>> Probably good to note here that this is backwards compatible. So if you have a
>> kernel that doesn't know about this bit, it'll clear it and hence you still get
>> BHRB. 
>> 
>> You should also note why you'd want to do disable this (ie. the core will run
>> faster).
>> 
>>> Secondly PowerISA v3.1 introduce filtering support for
>>> PERF_SAMPLE_BRANCH_IND_CALL/COND. The patch adds BHRB filter support
>>> for "ind_call" and "cond" in power10_bhrb_filter_map().
>>> 
>>> 'commit bb19af816025 ("powerpc/perf: Prevent kernel address leak to userspace
>>> via BHRB buffer")'
>>> added a check in bhrb_read() to filter the kernel address from BHRB buffer.
>>> Patch here modified
>>> it to avoid that check for PowerISA v3.1 based processors, since PowerISA v3.1
>>> allows
>>> only MSR[PR]=1 address to be written to BHRB buffer.
>>> 
>>> Signed-off-by: Athira Rajeev <atrajeev at linux.vnet.ibm.com>
>>> ---
>>> arch/powerpc/perf/core-book3s.c       | 27 +++++++++++++++++++++------
>>> arch/powerpc/perf/isa207-common.c     | 13 +++++++++++++
>>> arch/powerpc/perf/power10-pmu.c       | 13 +++++++++++--
>>> arch/powerpc/platforms/powernv/idle.c | 14 ++++++++++++++
>> 
>> This touches the idle code so we should get those guys on CC (adding Vaidy and
>> Ego).
>> 
>>> 4 files changed, 59 insertions(+), 8 deletions(-)
>>> 
> 
> [..snip..]
> 
> 
>>> diff --git a/arch/powerpc/platforms/powernv/idle.c
>>> b/arch/powerpc/platforms/powernv/idle.c
>>> index 2dd4673..7db99c7 100644
>>> --- a/arch/powerpc/platforms/powernv/idle.c
>>> +++ b/arch/powerpc/platforms/powernv/idle.c
>>> @@ -611,6 +611,7 @@ static unsigned long power9_idle_stop(unsigned long psscr,
>>> bool mmu_on)
>>> 	unsigned long srr1;
>>> 	unsigned long pls;
>>> 	unsigned long mmcr0 = 0;
>>> +	unsigned long mmcra_bhrb = 0;
> 
> We are saving the whole of MMCRA aren't we ? We might want to just
> name it mmcra in that case.
> 
>>> 	struct p9_sprs sprs = {}; /* avoid false used-uninitialised */
>>> 	bool sprs_saved = false;
>>> 
>>> @@ -657,6 +658,15 @@ static unsigned long power9_idle_stop(unsigned long
>>> psscr, bool mmu_on)
>>> 		  */
>>> 		mmcr0		= mfspr(SPRN_MMCR0);
>>> 	}
>>> +
>>> +	if (cpu_has_feature(CPU_FTR_ARCH_31)) {
>>> +		/* POWER10 uses MMCRA[:26] as BHRB disable bit
>>> +		 * to disable BHRB logic when not used. Hence Save and
>>> +		 * restore MMCRA after a state-loss idle.
>>> +		 */
> 
> Multi-line comment usually has the first line blank.

Hi Gautham

Thanks for checking. I will change the comment format
Yes, we are saving whole of MMCRA. 
> 
> 		/*
> 	         * Line 1
> 		 * Line 2
> 		 * .
> 		 * .
> 		 * .
> 		 * Line N
> 		 */
> 
>>> +		mmcra_bhrb		= mfspr(SPRN_MMCRA);
>> 
>> 
>> Why is the bhrb bit of mmcra special here?
> 
> The comment above could include the consequence of not saving and
> restoring MMCRA i.e
> 
> - If the user hasn't asked for the BHRB to be
>  written the value of MMCRA[BHRBD] = 1.
> 
> - On wakeup from stop, MMCRA[BHRBD] will be 0, since MMCRA is not a
>  previleged resource and will be lost.
> 
> - Thus, if we do not save and restore the MMCRA[BHRBD], the hardware
>  will be needlessly writing to the BHRB in the problem mode.
> 
>> 
>>> +	}
>>> +
>>> 	if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) {
>>> 		sprs.lpcr	= mfspr(SPRN_LPCR);
>>> 		sprs.hfscr	= mfspr(SPRN_HFSCR);
>>> @@ -721,6 +731,10 @@ static unsigned long power9_idle_stop(unsigned long
>>> psscr, bool mmu_on)
>>> 			mtspr(SPRN_MMCR0, mmcr0);
>>> 		}
>>> 
>>> +		/* Reload MMCRA to restore BHRB disable bit for POWER10 */
>>> +		if (cpu_has_feature(CPU_FTR_ARCH_31))
>>> +			mtspr(SPRN_MMCRA, mmcra_bhrb);
>>> +
>>> 		/*
>>> 		 * DD2.2 and earlier need to set then clear bit 60 in MMCRA
>>> 		 * to ensure the PMU starts running.
>> 
> 
> --
> Thanks and Regards
> gautham.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20200709/446eaeba/attachment-0001.htm>