[PATCH v3 08/32] powerpc/64s/exception: Remove old INT_KVM_HANDLER

[Nicholas Piggin]

Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/kernel/exceptions-64s.S | 55 +++++++++++++---------------
 1 file changed, 26 insertions(+), 29 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 90514766dc7d..cba99f9a815b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -266,15 +266,6 @@ do_define_int n
 	.endif
 .endm
 
-.macro INT_KVM_HANDLER name, vec, hsrr, area, skip
-	TRAMP_KVM_BEGIN(\name\()_kvm)
-	KVM_HANDLER \vec, \hsrr, \area, \skip
-.endm
-
-.macro GEN_KVM name
-	KVM_HANDLER IVEC, IHSRR, IAREA, IKVM_SKIP
-.endm
-
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 /*
@@ -293,35 +284,35 @@ do_define_int n
 	bne	\name\()_kvm
 .endm
 
-.macro KVM_HANDLER vec, hsrr, area, skip
-	.if \skip
+.macro GEN_KVM name
+	.if IKVM_SKIP
 	cmpwi	r10,KVM_GUEST_MODE_SKIP
 	beq	89f
 	.else
 BEGIN_FTR_SECTION_NESTED(947)
-	ld	r10,\area+EX_CFAR(r13)
+	ld	r10,IAREA+EX_CFAR(r13)
 	std	r10,HSTATE_CFAR(r13)
 END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
 	.endif
 
 BEGIN_FTR_SECTION_NESTED(948)
-	ld	r10,\area+EX_PPR(r13)
+	ld	r10,IAREA+EX_PPR(r13)
 	std	r10,HSTATE_PPR(r13)
 END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
-	ld	r10,\area+EX_R10(r13)
+	ld	r10,IAREA+EX_R10(r13)
 	std	r12,HSTATE_SCRATCH0(r13)
 	sldi	r12,r9,32
 	/* HSRR variants have the 0x2 bit added to their trap number */
-	.if \hsrr == EXC_HV_OR_STD
+	.if IHSRR == EXC_HV_OR_STD
 	BEGIN_FTR_SECTION
-	ori	r12,r12,(\vec + 0x2)
+	ori	r12,r12,(IVEC + 0x2)
 	FTR_SECTION_ELSE
-	ori	r12,r12,(\vec)
+	ori	r12,r12,(IVEC)
 	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
-	ori	r12,r12,(\vec + 0x2)
+	.elseif IHSRR
+	ori	r12,r12,(IVEC+ 0x2)
 	.else
-	ori	r12,r12,(\vec)
+	ori	r12,r12,(IVEC)
 	.endif
 
 #ifdef CONFIG_RELOCATABLE
@@ -334,25 +325,25 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 	std	r9,HSTATE_SCRATCH1(r13)
 	__LOAD_FAR_HANDLER(r9, kvmppc_interrupt)
 	mtctr	r9
-	ld	r9,\area+EX_R9(r13)
+	ld	r9,IAREA+EX_R9(r13)
 	bctr
 #else
-	ld	r9,\area+EX_R9(r13)
+	ld	r9,IAREA+EX_R9(r13)
 	b	kvmppc_interrupt
 #endif
 
 
-	.if \skip
+	.if IKVM_SKIP
 89:	mtocrf	0x80,r9
-	ld	r9,\area+EX_R9(r13)
-	ld	r10,\area+EX_R10(r13)
-	.if \hsrr == EXC_HV_OR_STD
+	ld	r9,IAREA+EX_R9(r13)
+	ld	r10,IAREA+EX_R10(r13)
+	.if IHSRR == EXC_HV_OR_STD
 	BEGIN_FTR_SECTION
 	b	kvmppc_skip_Hinterrupt
 	FTR_SECTION_ELSE
 	b	kvmppc_skip_interrupt
 	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
+	.elseif IHSRR
 	b	kvmppc_skip_Hinterrupt
 	.else
 	b	kvmppc_skip_interrupt
@@ -363,7 +354,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 #else
 .macro KVMTEST name, hsrr, n
 .endm
-.macro KVM_HANDLER name, vec, hsrr, area, skip
+.macro GEN_KVM name
 .endm
 #endif
 
@@ -1627,6 +1618,12 @@ EXC_VIRT_NONE(0x4b00, 0x100)
  * without saving, though xer is not a good idea to use, as hardware may
  * interpret some bits so it may be costly to change them.
  */
+INT_DEFINE_BEGIN(system_call)
+	IVEC=0xc00
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(system_call)
+
 .macro SYSTEM_CALL virt
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 	/*
@@ -1720,7 +1717,7 @@ TRAMP_KVM_BEGIN(system_call_kvm)
 	SET_SCRATCH0(r10)
 	std	r9,PACA_EXGEN+EX_R9(r13)
 	mfcr	r9
-	KVM_HANDLER 0xc00, EXC_STD, PACA_EXGEN, 0
+	GEN_KVM system_call
 #endif
 
 
-- 
2.23.0