[PATCH v2 08/13] powerpc/xmon: Add initial support for prefixed instructions
Jordan Niethe
jniethe5 at gmail.com
Tue Feb 11 16:33:50 AEDT 2020
A prefixed instruction is composed of a word prefix and a word suffix.
It does not make sense to be able to have a breakpoint on the suffix of
a prefixed instruction, so make this impossible.
When leaving xmon_core() we check to see if we are currently at a
breakpoint. If this is the case, the breakpoint needs to be proceeded
from. Initially emulate_step() is tried, but if this fails then we need
to execute the saved instruction out of line. The NIP is set to the
address of bpt::instr[] for the current breakpoint. bpt::instr[]
contains the instruction replaced by the breakpoint, followed by a trap
instruction. After bpt::instr[0] is executed and we hit the trap we
enter back into xmon_bpt(). We know that if we got here and the offset
indicates we are at bpt::instr[1] then we have just executed out of line
so we can put the NIP back to the instruction after the breakpoint
location and continue on.
Adding prefixed instructions complicates this as the bpt::instr[1] needs
to be used to hold the suffix. To deal with this make bpt::instr[] big
enough for three word instructions. bpt::instr[2] contains the trap,
and in the case of word instructions pad bpt::instr[1] with a noop.
No support for disassembling prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5 at gmail.com>
---
v2: Rename sufx to suffix
---
arch/powerpc/xmon/xmon.c | 82 ++++++++++++++++++++++++++++++++++------
1 file changed, 71 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 897e512c6379..0b085642bbe7 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -97,7 +97,8 @@ static long *xmon_fault_jmp[NR_CPUS];
/* Breakpoint stuff */
struct bpt {
unsigned long address;
- unsigned int instr[2];
+ /* Prefixed instructions can not cross 64-byte boundaries */
+ unsigned int instr[3] __aligned(64);
atomic_t ref_count;
int enabled;
unsigned long pad;
@@ -113,6 +114,7 @@ static struct bpt bpts[NBPTS];
static struct bpt dabr;
static struct bpt *iabr;
static unsigned bpinstr = 0x7fe00008; /* trap */
+static unsigned nopinstr = 0x60000000; /* nop */
#define BP_NUM(bp) ((bp) - bpts + 1)
@@ -120,6 +122,7 @@ static unsigned bpinstr = 0x7fe00008; /* trap */
static int cmds(struct pt_regs *);
static int mread(unsigned long, void *, int);
static int mwrite(unsigned long, void *, int);
+static int read_instr(unsigned long, unsigned int *, unsigned int *);
static int handle_fault(struct pt_regs *);
static void byterev(unsigned char *, int);
static void memex(void);
@@ -706,7 +709,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
bp = at_breakpoint(regs->nip);
if (bp != NULL) {
int stepped = emulate_step(regs, bp->instr[0],
- PPC_NO_SUFFIX);
+ bp->instr[1]);
if (stepped == 0) {
regs->nip = (unsigned long) &bp->instr[0];
atomic_inc(&bp->ref_count);
@@ -761,8 +764,8 @@ static int xmon_bpt(struct pt_regs *regs)
/* Are we at the trap at bp->instr[1] for some bp? */
bp = in_breakpoint_table(regs->nip, &offset);
- if (bp != NULL && offset == 4) {
- regs->nip = bp->address + 4;
+ if (bp != NULL && (offset == 4 || offset == 8)) {
+ regs->nip = bp->address + offset;
atomic_dec(&bp->ref_count);
return 1;
}
@@ -864,7 +867,8 @@ static struct bpt *in_breakpoint_table(unsigned long nip, unsigned long *offp)
return NULL;
off %= sizeof(struct bpt);
if (off != offsetof(struct bpt, instr[0])
- && off != offsetof(struct bpt, instr[1]))
+ && off != offsetof(struct bpt, instr[1])
+ && off != offsetof(struct bpt, instr[2]))
return NULL;
*offp = off - offsetof(struct bpt, instr[0]);
return (struct bpt *) (nip - off);
@@ -881,9 +885,18 @@ static struct bpt *new_breakpoint(unsigned long a)
for (bp = bpts; bp < &bpts[NBPTS]; ++bp) {
if (!bp->enabled && atomic_read(&bp->ref_count) == 0) {
+ /*
+ * Prefixed instructions are two words, but regular
+ * instructions are only one. Use a nop to pad out the
+ * regular instructions so that we can place the trap
+ * at the same plac. For prefixed instructions the nop
+ * will get overwritten during insert_bpts().
+ */
bp->address = a;
- bp->instr[1] = bpinstr;
+ bp->instr[1] = nopinstr;
store_inst(&bp->instr[1]);
+ bp->instr[2] = bpinstr;
+ store_inst(&bp->instr[2]);
return bp;
}
}
@@ -895,13 +908,15 @@ static struct bpt *new_breakpoint(unsigned long a)
static void insert_bpts(void)
{
int i;
- struct bpt *bp;
+ unsigned int prefix;
+ struct bpt *bp, *bp2;
bp = bpts;
for (i = 0; i < NBPTS; ++i, ++bp) {
if ((bp->enabled & (BP_TRAP|BP_CIABR)) == 0)
continue;
- if (mread(bp->address, &bp->instr[0], 4) != 4) {
+ if (!read_instr(bp->address, &bp->instr[0],
+ &bp->instr[1])) {
printf("Couldn't read instruction at %lx, "
"disabling breakpoint there\n", bp->address);
bp->enabled = 0;
@@ -913,7 +928,34 @@ static void insert_bpts(void)
bp->enabled = 0;
continue;
}
+ /*
+ * Check the address is not a suffix by looking for a prefix in
+ * front of it.
+ */
+ if ((mread(bp->address - 4, &prefix, 4) == 4) &&
+ IS_PREFIX(prefix)) {
+ printf("Breakpoint at %lx is on the second word of a "
+ "prefixed instruction, disabling it\n",
+ bp->address);
+ bp->enabled = 0;
+ continue;
+ }
+ /*
+ * We might still be a suffix - if the prefix has already been
+ * replaced by a breakpoint we won't catch it with the above
+ * test.
+ */
+ bp2 = at_breakpoint(bp->address - 4);
+ if (bp2 && IS_PREFIX(bp2->instr[0])) {
+ printf("Breakpoint at %lx is on the second word of a "
+ "prefixed instruction, disabling it\n",
+ bp->address);
+ bp->enabled = 0;
+ continue;
+ }
store_inst(&bp->instr[0]);
+ if (IS_PREFIX(bp->instr[0]))
+ store_inst(&bp->instr[1]);
if (bp->enabled & BP_CIABR)
continue;
if (patch_instruction((unsigned int *)bp->address,
@@ -1164,14 +1206,14 @@ static int do_step(struct pt_regs *regs)
*/
static int do_step(struct pt_regs *regs)
{
- unsigned int instr;
+ unsigned int instr, suffix;
int stepped;
force_enable_xmon();
/* check we are in 64-bit kernel mode, translation enabled */
if ((regs->msr & (MSR_64BIT|MSR_PR|MSR_IR)) == (MSR_64BIT|MSR_IR)) {
- if (mread(regs->nip, &instr, 4) == 4) {
- stepped = emulate_step(regs, instr, PPC_NO_SUFFIX);
+ if (read_instr(regs->nip, &instr, &suffix)) {
+ stepped = emulate_step(regs, instr, suffix);
if (stepped < 0) {
printf("Couldn't single-step %s instruction\n",
(IS_RFID(instr)? "rfid": "mtmsrd"));
@@ -2130,6 +2172,24 @@ mwrite(unsigned long adrs, void *buf, int size)
return n;
}
+static int read_instr(unsigned long addr, unsigned int *instr,
+ unsigned int *suffix)
+{
+ int r;
+
+ r = mread(addr, instr, 4);
+ if (r != 4)
+ return 0;
+ if (!IS_PREFIX(*instr))
+ return 4;
+ r = mread(addr + 4, suffix, 4);
+ if (r != 4)
+ return 0;
+
+ return 8;
+}
+
+
static int fault_type;
static int fault_except;
static char *fault_chars[] = { "--", "**", "##" };
--
2.17.1
More information about the Linuxppc-dev
mailing list