[PATCH 1/1] powerpc/eeh: fix deadlock handling dead PHB

[Sam Bobroff]

Recovering a dead PHB can currently cause a deadlock as the PCI
rescan/remove lock is taken twice.

This is caused as part of an existing bug in
eeh_handle_special_event(). The pe is processed while traversing the
PHBs even though the pe is unrelated to the loop. This causes the pe
to be, incorrectly, processed more than once.

Untangling this section can move the pe processing out of the loop and
also outside the locked section, correcting both problems.

Signed-off-by: Sam Bobroff <sbobroff at linux.ibm.com>
---
I have only compile tested this fix, Frederic Barrat (who discovered it) has
offered to test it (thanks!).

 arch/powerpc/kernel/eeh_driver.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 3dd1a422fc29..d6e75a8a14ce 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -1190,6 +1190,17 @@ void eeh_handle_special_event(void)
 			eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
 			eeh_handle_normal_event(pe);
 		} else {
+			eeh_for_each_pe(pe, tmp_pe)
+				eeh_pe_for_each_dev(tmp_pe, edev, tmp_edev)
+					edev->mode &= ~EEH_DEV_NO_HANDLER;
+
+			/* Notify all devices to be down */
+			eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true);
+			eeh_set_channel_state(pe, pci_channel_io_perm_failure);
+			eeh_pe_report(
+				"error_detected(permanent failure)", pe,
+				eeh_report_failure, NULL);
+
 			pci_lock_rescan_remove();
 			list_for_each_entry(hose, &hose_list, list_node) {
 				phb_pe = eeh_phb_pe_get(hose);
@@ -1198,16 +1209,6 @@ void eeh_handle_special_event(void)
 				    (phb_pe->state & EEH_PE_RECOVERING))
 					continue;
 
-				eeh_for_each_pe(pe, tmp_pe)
-					eeh_pe_for_each_dev(tmp_pe, edev, tmp_edev)
-						edev->mode &= ~EEH_DEV_NO_HANDLER;
-
-				/* Notify all devices to be down */
-				eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true);
-				eeh_set_channel_state(pe, pci_channel_io_perm_failure);
-				eeh_pe_report(
-					"error_detected(permanent failure)", pe,
-					eeh_report_failure, NULL);
 				bus = eeh_pe_bus_get(phb_pe);
 				if (!bus) {
 					pr_err("%s: Cannot find PCI bus for "
-- 
2.22.0.216.g00a2a96fc9