[PATCH 1/6] powerpc/eeh: Add sysfs files in late probe
Oliver O'Halloran
oohall at gmail.com
Mon Feb 3 19:35:16 AEDT 2020
Move creating the EEH specific sysfs files into eeh_add_device_late()
rather than being open-coded all over the place. Calling the function is
generally done immediately after calling eeh_add_device_late() anyway. The
two cases where it's not done there (OF based PCI probing and the pseries
VFs) don't seem to have any issues with the re-ordering.
Signed-off-by: Oliver O'Halloran <oohall at gmail.com>
---
arch/powerpc/include/asm/eeh.h | 3 ---
arch/powerpc/kernel/eeh.c | 24 +-----------------------
arch/powerpc/kernel/of_platform.c | 3 ---
arch/powerpc/kernel/pci-common.c | 3 ---
arch/powerpc/platforms/powernv/eeh-powernv.c | 1 -
arch/powerpc/platforms/pseries/eeh_pseries.c | 3 +--
6 files changed, 2 insertions(+), 35 deletions(-)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 6f9b2a1..5a34907 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -305,7 +305,6 @@ void eeh_add_device_early(struct pci_dn *);
void eeh_add_device_tree_early(struct pci_dn *);
void eeh_add_device_late(struct pci_dev *);
void eeh_add_device_tree_late(struct pci_bus *);
-void eeh_add_sysfs_files(struct pci_bus *);
void eeh_remove_device(struct pci_dev *);
int eeh_unfreeze_pe(struct eeh_pe *pe);
int eeh_pe_reset_and_recover(struct eeh_pe *pe);
@@ -368,8 +367,6 @@ static inline void eeh_add_device_late(struct pci_dev *dev) { }
static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
-static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
-
static inline void eeh_remove_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 17cb3e9..0878912 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1210,6 +1210,7 @@ void eeh_add_device_late(struct pci_dev *dev)
dev->dev.archdata.edev = edev;
eeh_addr_cache_insert_dev(dev);
+ eeh_sysfs_add_device(dev);
}
/**
@@ -1238,29 +1239,6 @@ void eeh_add_device_tree_late(struct pci_bus *bus)
EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
/**
- * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
- * @bus: PCI bus
- *
- * This routine must be used to add EEH sysfs files for PCI
- * devices which are attached to the indicated PCI bus. The PCI bus
- * is added after system boot through hotplug or dlpar.
- */
-void eeh_add_sysfs_files(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_sysfs_add_device(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *subbus = dev->subordinate;
- if (subbus)
- eeh_add_sysfs_files(subbus);
- }
- }
-}
-EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
-
-/**
* eeh_remove_device - Undo EEH setup for the indicated pci device
* @dev: pci device to be removed
*
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 427fc22..cb68800 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -86,9 +86,6 @@ static int of_pci_phb_probe(struct platform_device *dev)
/* Add probed PCI devices to the device model */
pci_bus_add_devices(phb->bus);
- /* sysfs files should only be added after devices are added */
- eeh_add_sysfs_files(phb->bus);
-
return 0;
}
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index c6c0341..3d2b1cf 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1404,9 +1404,6 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
/* Add new devices to global lists. Register in proc, sysfs. */
pci_bus_add_devices(bus);
-
- /* sysfs files should only be added after devices are added */
- eeh_add_sysfs_files(bus);
}
EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 6f300ab..ef727ec 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -48,7 +48,6 @@ void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
dev_dbg(&pdev->dev, "EEH: Setting up device\n");
eeh_add_device_early(pdn);
eeh_add_device_late(pdev);
- eeh_sysfs_add_device(pdev);
}
static int pnv_eeh_init(void)
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 893ba3f..95bbf91 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -68,7 +68,6 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
}
#endif
eeh_add_device_early(pdn);
- eeh_add_device_late(pdev);
#ifdef CONFIG_PCI_IOV
if (pdev->is_virtfn) {
struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
@@ -78,7 +77,7 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
eeh_add_to_parent_pe(edev); /* Add as VF PE type */
}
#endif
- eeh_sysfs_add_device(pdev);
+ eeh_add_device_late(pdev);
}
/*
--
2.9.5
More information about the Linuxppc-dev
mailing list