[PATCH v6 0/5] PCI: Unify ECAM constants in native PCI Express drivers
Michael Walle
michael at walle.cc
Wed Dec 9 02:41:50 AEDT 2020
Hi Lorenzo, Krzysztof,
>On Sun, 29 Nov 2020 23:07:38 +0000, Krzysztof Wilczyński wrote:
>> Unify ECAM-related constants into a single set of standard constants
>> defining memory address shift values for the byte-level address that can
>> be used when accessing the PCI Express Configuration Space, and then
>> move native PCI Express controller drivers to use newly introduced
>> definitions retiring any driver-specific ones.
>>
>> The ECAM ("Enhanced Configuration Access Mechanism") is defined by the
>> PCI Express specification (see PCI Express Base Specification, Revision
>> 5.0, Version 1.0, Section 7.2.2, p. 676), thus most hardware should
>> implement it the same way.
>>
>> [...]
>
>Applied to pci/ecam, thanks!
>
>[1/5] PCI: Unify ECAM constants in native PCI Express drivers
> https://git.kernel.org/lpieralisi/pci/c/f3c07cf692
>[2/5] PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser
> https://git.kernel.org/lpieralisi/pci/c/3c38579263
>[3/5] PCI: iproc: Convert to use the new ECAM constants
> https://git.kernel.org/lpieralisi/pci/c/333ec9d3cc
>[4/5] PCI: vmd: Update type of the __iomem pointers
> https://git.kernel.org/lpieralisi/pci/c/89094c12ea
>[5/5] PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c
> https://git.kernel.org/lpieralisi/pci/c/3dc62532a5
Patch 1/5 breaks LS1028A boards:
[..]
[ 1.144426] pci-host-generic 1f0000000.pcie: host bridge /soc/pcie at 1f0000000 ranges:
[ 1.152276] pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x0000000000
[ 1.161161] pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x0000000000
[ 1.170043] pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x0000000000
[ 1.178924] pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x0000000000
[ 1.187805] pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x0000000000
[ 1.196686] pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x0000000000
[ 1.205562] pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x0000000000
[ 1.214465] pci-host-generic 1f0000000.pcie: ECAM at [mem 0x1f0000000-0x1f00fffff] for [bus 00]
[ 1.223318] pci-host-generic 1f0000000.pcie: PCI host bridge to bus 0000:00
[ 1.230350] pci_bus 0000:00: root bus resource [bus 00]
[ 1.235625] pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff] (bus address [0x00000000-0x0015ffff])
[ 1.246077] pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref] (bus address [0x00000000-0x0006ffff])
[ 1.256969] pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff] (bus address [0x00000000-0x0001ffff])
[ 1.267427] pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref] (bus address [0x00000000-0x0001ffff])
[ 1.278326] pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff] (bus address [0x00000000-0x0001ffff])
[ 1.288779] pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref] (bus address [0x00000000-0x0001ffff])
[ 1.299669] pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff] (bus address [0x00000000-0x003fffff])
[ 1.310138] pci 0000:00:00.0: [1957:e100] type 00 class 0x020001
[ 1.316234] pci 0000:00:00.0: BAR 0: [mem 0x1f8000000-0x1f803ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 1.326776] pci 0000:00:00.0: BAR 2: [mem 0x1f8160000-0x1f816ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 1.337759] pci 0000:00:00.0: VF BAR 0: [mem 0x1f81d0000-0x1f81dffff 64bit] (from Enhanced Allocation, properties 0x4)
[ 1.348563] pci 0000:00:00.0: VF BAR 2: [mem 0x1f81f0000-0x1f81fffff 64bit pref] (from Enhanced Allocation, properties 0x3)
[ 1.359821] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.365368] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x1f81d0000-0x1f81effff 64bit] (contains BAR0 for 2 VFs)
[ 1.375381] pci 0000:00:00.0: VF(n) BAR2 space: [mem 0x1f81f0000-0x1f820ffff 64bit pref] (contains BAR2 for 2 VFs)
[ 1.385983] Unable to handle kernel paging request at virtual address ffff800012132000
[ 1.393972] Mem abort info:
[ 1.396783] ESR = 0x96000007
[ 1.399859] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.405215] SET = 0, FnV = 0
[ 1.408290] EA = 0, S1PTW = 0
[ 1.411453] Data abort info:
[ 1.414352] ISV = 0, ISS = 0x00000007
[ 1.418216] CM = 0, WnR = 0
[ 1.421205] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000008369c000
[ 1.427966] [ffff800012132000] pgd=00000020fffff003, p4d=00000020fffff003, pud=00000020ffffe003, pmd=00000020ffffa003, pte=0000000000000000
[ 1.440618] Internal error: Oops: 96000007 [#1] PREEMPT SMP
[ 1.446239] Modules linked in:
[ 1.449320] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc3-00101-g2f378db5c89 #191
[ 1.457484] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
[ 1.465827] pstate: 20000085 (nzCv daIf -PAN -UAO -TCO BTYPE=--)
[ 1.471892] pc : pci_generic_config_read+0x38/0xe0
[ 1.476723] lr : pci_generic_config_read+0x24/0xe0
[ 1.481553] sp : ffff80001211b920
[ 1.484891] x29: ffff80001211b920 x28: 0000000000000000
[ 1.490252] x27: ffff8000116a04bc x26: 0000000000000000
[ 1.495612] x25: 0000000000000001 x24: ffff80001211ba54
[ 1.500972] x23: ffff0020009c3800 x22: 0000000000000000
[ 1.506332] x21: 0000000000000087 x20: ffff80001211b994
[ 1.511692] x19: 0000000000000004 x18: 0000000000000000
[ 1.517052] x17: 0000000000000000 x16: 00000000d5edfbc1
[ 1.522412] x15: ffffffffffffffff x14: ffff800011cf9948
[ 1.527772] x13: ffff002000305a1c x12: 0000000000000030
[ 1.533132] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
[ 1.538491] x9 : 2c6b7173626d686f x8 : 000000000000ea60
[ 1.543851] x7 : ffff80001211ba54 x6 : 0000000000000000
[ 1.549211] x5 : 0000000000000000 x4 : ffff800012131000
[ 1.554570] x3 : 0000000000000000 x2 : 0000000000000000
[ 1.559930] x1 : 0000000000001000 x0 : ffff800012132000
[ 1.565290] Call trace:
[ 1.567752] pci_generic_config_read+0x38/0xe0
[ 1.572233] pci_bus_read_config_dword+0x84/0xd8
[ 1.576890] pci_bus_generic_read_dev_vendor_id+0x34/0x1b0
[ 1.582423] pci_bus_read_dev_vendor_id+0x4c/0x70
[ 1.587167] pci_scan_single_device+0x84/0xe0
[ 1.591559] pci_scan_slot+0x6c/0x120
[ 1.595250] pci_scan_child_bus_extend+0x54/0x298
[ 1.599994] pci_scan_root_bus_bridge+0xd4/0xf0
[ 1.604562] pci_host_probe+0x18/0xb0
[ 1.608254] pci_host_common_probe+0x13c/0x1a0
[ 1.612735] platform_drv_probe+0x54/0xa8
[ 1.616777] really_probe+0xe4/0x3b8
[ 1.620380] driver_probe_device+0x58/0xb8
[ 1.624509] device_driver_attach+0x74/0x80
[ 1.628725] __driver_attach+0x58/0xe0
[ 1.632503] bus_for_each_dev+0x74/0xc8
[ 1.636369] driver_attach+0x24/0x30
[ 1.639972] bus_add_driver+0x18c/0x1f0
[ 1.643838] driver_register+0x64/0x120
[ 1.647704] __platform_driver_register+0x48/0x58
[ 1.652449] gen_pci_driver_init+0x1c/0x28
[ 1.656580] do_one_initcall+0x4c/0x2c0
[ 1.660447] kernel_init_freeable+0x1e4/0x250
[ 1.664840] kernel_init+0x14/0x118
[ 1.668355] ret_from_fork+0x10/0x34
[ 1.671961] Code: 7100067f 540001c0 71000a7f 54000300 (b9400001)
[ 1.678114] ---[ end trace 0aca1b048661e8b3 ]---
[ 1.682770] note: swapper/0[1] exited with preempt_count 1
[ 1.688305] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.696031] SMP: stopping secondary CPUs
[ 1.699989] Kernel Offset: disabled
[ 1.703503] CPU features: 0x0240022,61006008
[ 1.707806] Memory Limit: none
[ 1.710884] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
There is a LS1028A eval board in kernelci here:
https://lavalab.nxp.com/scheduler/job/170566
I actually have this board which also have a LS1028A SoC:
https://lavalab.kontron.com/scheduler/job/1771
But in the latter you won't see much because earlycon isn't active. [I'm
about to fix that.]
By reverting patch 1/5, the board will work again.
-michael
More information about the Linuxppc-dev
mailing list