powerpc 5.10-rcN boot failures with RCU_SCALE_TEST=m
Uladzislau Rezki
urezki at gmail.com
Fri Dec 4 01:34:45 AEDT 2020
On Thu, Dec 03, 2020 at 05:22:20PM +1100, Michael Ellerman wrote:
> Uladzislau Rezki <urezki at gmail.com> writes:
> > On Thu, Dec 03, 2020 at 01:03:32AM +1100, Michael Ellerman wrote:
> ...
> >>
> >> The SMP bringup stalls because _cpu_up() is blocked trying to take
> >> cpu_hotplug_lock for writing:
> >>
> >> [ 401.403132][ T0] task:swapper/0 state:D stack:12512 pid: 1 ppid: 0 flags:0x00000800
> >> [ 401.403502][ T0] Call Trace:
> >> [ 401.403907][ T0] [c0000000062c37d0] [c0000000062c3830] 0xc0000000062c3830 (unreliable)
> >> [ 401.404068][ T0] [c0000000062c39b0] [c000000000019d70] __switch_to+0x2e0/0x4a0
> >> [ 401.404189][ T0] [c0000000062c3a10] [c000000000b87228] __schedule+0x288/0x9b0
> >> [ 401.404257][ T0] [c0000000062c3ad0] [c000000000b879b8] schedule+0x68/0x120
> >> [ 401.404324][ T0] [c0000000062c3b00] [c000000000184ad4] percpu_down_write+0x164/0x170
> >> [ 401.404390][ T0] [c0000000062c3b50] [c000000000116b68] _cpu_up+0x68/0x280
> >> [ 401.404475][ T0] [c0000000062c3bb0] [c000000000116e70] cpu_up+0xf0/0x140
> >> [ 401.404546][ T0] [c0000000062c3c30] [c00000000011776c] bringup_nonboot_cpus+0xac/0xf0
> >> [ 401.404643][ T0] [c0000000062c3c80] [c000000000eea1b8] smp_init+0x40/0xcc
> >> [ 401.404727][ T0] [c0000000062c3ce0] [c000000000ec43dc] kernel_init_freeable+0x1e0/0x3a0
> >> [ 401.404799][ T0] [c0000000062c3db0] [c000000000011ec4] kernel_init+0x24/0x150
> >> [ 401.404958][ T0] [c0000000062c3e20] [c00000000000daf0] ret_from_kernel_thread+0x5c/0x6c
> >>
> >> It can't get it because kprobe_optimizer() has taken it for read and is now
> >> blocked waiting for synchronize_rcu_tasks():
> >>
> >> [ 401.418808][ T0] task:kworker/0:1 state:D stack:13392 pid: 12 ppid: 2 flags:0x00000800
> >> [ 401.418951][ T0] Workqueue: events kprobe_optimizer
> >> [ 401.419078][ T0] Call Trace:
> >> [ 401.419121][ T0] [c0000000062ef650] [c0000000062ef710] 0xc0000000062ef710 (unreliable)
> >> [ 401.419213][ T0] [c0000000062ef830] [c000000000019d70] __switch_to+0x2e0/0x4a0
> >> [ 401.419281][ T0] [c0000000062ef890] [c000000000b87228] __schedule+0x288/0x9b0
> >> [ 401.419347][ T0] [c0000000062ef950] [c000000000b879b8] schedule+0x68/0x120
> >> [ 401.419415][ T0] [c0000000062ef980] [c000000000b8e664] schedule_timeout+0x2a4/0x340
> >> [ 401.419484][ T0] [c0000000062efa80] [c000000000b894ec] wait_for_completion+0x9c/0x170
> >> [ 401.419552][ T0] [c0000000062efae0] [c0000000001ac85c] __wait_rcu_gp+0x19c/0x210
> >> [ 401.419619][ T0] [c0000000062efb40] [c0000000001ac90c] synchronize_rcu_tasks_generic+0x3c/0x70
> >> [ 401.419690][ T0] [c0000000062efbe0] [c00000000022a3dc] kprobe_optimizer+0x1dc/0x470
> >> [ 401.419757][ T0] [c0000000062efc60] [c000000000136684] process_one_work+0x2f4/0x530
> >> [ 401.419823][ T0] [c0000000062efd20] [c000000000138d28] worker_thread+0x78/0x570
> >> [ 401.419891][ T0] [c0000000062efdb0] [c000000000142424] kthread+0x194/0x1a0
> >> [ 401.419976][ T0] [c0000000062efe20] [c00000000000daf0] ret_from_kernel_thread+0x5c/0x6c
> >>
> >> But why is the synchronize_rcu_tasks() not completing?
> >>
> > I think that it is because RCU is not fully initialized by that time.
>
> Yeah that would explain it :)
>
> > The 36dadef23fcc ("kprobes: Init kprobes in early_initcall") patch
> > switches to early_initcall() that has a higher priority sequence than
> > core_initcall() that is used to complete an RCU setup in the rcu_set_runtime_mode().
>
> I was looking at debug_lockdep_rcu_enabled(), which is:
>
> noinstr int notrace debug_lockdep_rcu_enabled(void)
> {
> return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && debug_locks &&
> current->lockdep_recursion == 0;
> }
>
> That is not firing any warnings for me because rcu_scheduler_active is:
>
> (gdb) p/x rcu_scheduler_active
> $1 = 0x1
>
> Which is:
>
> #define RCU_SCHEDULER_INIT 1
>
Agree with that.
> But that's different to RCU_SCHEDULER_RUNNING, which is set in
> rcu_set_runtime_mode() as you mentioned:
>
> static int __init rcu_set_runtime_mode(void)
> {
> rcu_test_sync_prims();
> rcu_scheduler_active = RCU_SCHEDULER_RUNNING;
> kfree_rcu_scheduler_running();
> rcu_test_sync_prims();
> return 0;
> }
>
BTW, since you can reproduce it and have a test setup, could you please
check that:
<snip>
-core_initcall(rcu_set_runtime_mode);
+early_initcall(rcu_set_runtime_mode);
<snip>
Just in case. The the synchronize_rcu_tasks() gets blocked:
<snip>
void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array,
if (crcu_array[j] == crcu_array[i])
break;
if (j == i) {
wait_for_completion(&rs_array[i].completion); <--- here
destroy_rcu_head_on_stack(&rs_array[i].head);
}
...
<snip>
but that is obvious when looking at your full traces.
> The comment on rcu_scheduler_active implies that once we're at
> RCU_SCHEDULER_INIT things should work:
>
> /*
> * The rcu_scheduler_active variable is initialized to the value
> * RCU_SCHEDULER_INACTIVE and transitions RCU_SCHEDULER_INIT just before the
> * first task is spawned. So when this variable is RCU_SCHEDULER_INACTIVE,
> * RCU can assume that there is but one task, allowing RCU to (for example)
> * optimize synchronize_rcu() to a simple barrier(). When this variable
> * is RCU_SCHEDULER_INIT, RCU must actually do all the hard work required
> * to detect real grace periods. This variable is also used to suppress
> * boot-time false positives from lockdep-RCU error checking. Finally, it
> * transitions from RCU_SCHEDULER_INIT to RCU_SCHEDULER_RUNNING after RCU
> * is fully initialized, including all of its kthreads having been spawned.
> */
>
>
> So I'm not sure, the comments and the debug checks imply that it is OK
> for kprobes to be using RCU this early.
>
Sounds like it should be possible.
>
> I guess I'll keep digging.
>
Thank you! I also will dig further with that even though i do not have a setup
for reproducing it.
--
Vlad Rezki
More information about the Linuxppc-dev
mailing list