[PATCH v2 03/17] ibmvfc: add Subordinate CRQ definitions

Tyrel Datwyler tyreld at linux.ibm.com
Wed Dec 2 11:53:15 AEDT 2020


Subordinate Command Response Queues (Sub CRQ) are used in conjunction
with the primary CRQ when more than one queue is needed by the virtual
IO adapter. Recent phyp firmware versions support Sub CRQ's with ibmvfc
adapters. This feature is a prerequisite for supporting multiple
hardware backed submission queues in the vfc adapter.

The Sub CRQ command element differs from the standard CRQ in that it is
32bytes long as opposed to 16bytes for the latter. Despite this extra
16bytes the ibmvfc protocol will use the original CRQ command element
mapped to the first 16bytes of the Sub CRQ element initially.

Add definitions for the Sub CRQ command element and queue.

Signed-off-by: Tyrel Datwyler <tyreld at linux.ibm.com>
Reviewed-by: Brian King <brking at linux.vnet.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index e095daada70e..b3cd35cbf067 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -656,6 +656,29 @@ struct ibmvfc_crq_queue {
 	dma_addr_t msg_token;
 };
 
+struct ibmvfc_sub_crq {
+	struct ibmvfc_crq crq;
+	__be64 reserved[2];
+} __packed __aligned(8);
+
+struct ibmvfc_sub_queue {
+	struct ibmvfc_sub_crq *msgs;
+	dma_addr_t msg_token;
+	int size, cur;
+	struct ibmvfc_host *vhost;
+	unsigned long cookie;
+	unsigned long vios_cookie;
+	unsigned long hw_irq;
+	unsigned long irq;
+	unsigned long hwq_id;
+	char name[32];
+};
+
+struct ibmvfc_scsi_channels {
+	struct ibmvfc_sub_queue *scrqs;
+	unsigned int active_queues;
+};
+
 enum ibmvfc_ae_link_state {
 	IBMVFC_AE_LS_LINK_UP		= 0x01,
 	IBMVFC_AE_LS_LINK_BOUNCED	= 0x02,
-- 
2.27.0



More information about the Linuxppc-dev mailing list