[PATCH v3 0/4] Clean up hugetlb boot command line processing
Qian Cai
cai at lca.pw
Tue Apr 21 01:34:22 AEST 2020
> On Apr 17, 2020, at 2:50 PM, Mike Kravetz <mike.kravetz at oracle.com> wrote:
>
> Longpeng(Mike) reported a weird message from hugetlb command line processing
> and proposed a solution [1]. While the proposed patch does address the
> specific issue, there are other related issues in command line processing.
> As hugetlbfs evolved, updates to command line processing have been made to
> meet immediate needs and not necessarily in a coordinated manner. The result
> is that some processing is done in arch specific code, some is done in arch
> independent code and coordination is problematic. Semantics can vary between
> architectures.
>
> The patch series does the following:
> - Define arch specific arch_hugetlb_valid_size routine used to validate
> passed huge page sizes.
> - Move hugepagesz= command line parsing out of arch specific code and into
> an arch independent routine.
> - Clean up command line processing to follow desired semantics and
> document those semantics.
>
> [1] https://lore.kernel.org/linux-mm/20200305033014.1152-1-longpeng2@huawei.com
>
> Mike Kravetz (4):
> hugetlbfs: add arch_hugetlb_valid_size
> hugetlbfs: move hugepagesz= parsing to arch independent code
> hugetlbfs: remove hugetlb_add_hstate() warning for existing hstate
> hugetlbfs: clean up command line processing
Reverted this series fixed many undefined behaviors on arm64 with the config,
https://raw.githubusercontent.com/cailca/linux-mm/master/arm64.config
[ 54.172683][ T1] UBSAN: shift-out-of-bounds in ./include/linux/hugetlb.h:555:34
[ 54.180411][ T1] shift exponent 4294967285 is too large for 64-bit type 'unsigned long'
[ 54.188885][ T1] CPU: 130 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc2-next-20200420 #1
[ 54.197284][ T1] Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019
[ 54.207888][ T1] Call trace:
[ 54.211100][ T1] dump_backtrace+0x0/0x224
[ 54.215565][ T1] show_stack+0x20/0x2c
[ 54.219651][ T1] dump_stack+0xfc/0x184
[ 54.223829][ T1] __ubsan_handle_shift_out_of_bounds+0x304/0x344
[ 54.230204][ T1] hugetlb_add_hstate+0x3ec/0x414
huge_page_size at include/linux/hugetlb.h:555
(inlined by) hugetlb_add_hstate at mm/hugetlb.c:3301
[ 54.235191][ T1] hugetlbpage_init+0x14/0x30
[ 54.239824][ T1] do_one_initcall+0x6c/0x144
[ 54.244446][ T1] do_initcall_level+0x158/0x1c4
[ 54.249336][ T1] do_initcalls+0x68/0xb0
[ 54.253597][ T1] do_basic_setup+0x28/0x30
[ 54.258049][ T1] kernel_init_freeable+0x19c/0x228
[ 54.263188][ T1] kernel_init+0x14/0x208
[ 54.267473][ T1] ret_from_fork+0x10/0x18
[ 55.534338][ T1] UBSAN: shift-out-of-bounds in ./include/linux/hugetlb.h:555:34
[ 55.542064][ T1] shift exponent 4294967285 is too large for 64-bit type 'unsigned long'
[ 55.550555][ T1] CPU: 129 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc2-next-20200420 #1
[ 55.558992][ T1] Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019
[ 55.569659][ T1] Call trace:
[ 55.572898][ T1] dump_backtrace+0x0/0x224
[ 55.577335][ T1] show_stack+0x20/0x2c
[ 55.581442][ T1] dump_stack+0xfc/0x184
[ 55.585621][ T1] __ubsan_handle_shift_out_of_bounds+0x304/0x344
[ 55.592031][ T1] __hugetlb_cgroup_file_dfl_init+0x37c/0x384
[ 55.598062][ T1] hugetlb_cgroup_file_init+0x9c/0xd8
[ 55.603399][ T1] hugetlb_init+0x248/0x448
[ 55.607840][ T1] do_one_initcall+0x6c/0x144
[ 55.612493][ T1] do_initcall_level+0x158/0x1c4
[ 55.617404][ T1] do_initcalls+0x68/0xb0
[ 55.621664][ T1] do_basic_setup+0x28/0x30
[ 55.626107][ T1] kernel_init_freeable+0x19c/0x228
[ 55.631253][ T1] kernel_init+0x14/0x208
[ 55.635519][ T1] ret_from_fork+0x10/0x18
[ 153.283648][ T1] ================================================================================
[ 153.293078][ T1] UBSAN: shift-out-of-bounds in ./include/linux/hugetlb.h:555:34
[ 153.300841][ T1] shift exponent 4294967285 is too large for 64-bit type 'unsigned long'
[ 153.309185][ T1] CPU: 161 PID: 1 Comm: swapper/0 Tainted: G L 5.7.0-rc2-next-20200420 #1
[ 153.318879][ T1] Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019
[ 153.329352][ T1] Call trace:
[ 153.332545][ T1] dump_backtrace+0x0/0x224
[ 153.336945][ T1] show_stack+0x20/0x2c
[ 153.341000][ T1] dump_stack+0xfc/0x184
[ 153.345149][ T1] __ubsan_handle_shift_out_of_bounds+0x304/0x344
[ 153.351465][ T1] hugetlbfs_fill_super+0x424/0x43c
[ 153.356560][ T1] vfs_get_super+0xcc/0x170
[ 153.360959][ T1] get_tree_nodev+0x28/0x34
[ 153.365358][ T1] hugetlbfs_get_tree+0xfc/0x128
[ 153.370193][ T1] vfs_get_tree+0x54/0x158
[ 153.374513][ T1] fc_mount+0x1c/0x5c
[ 153.378399][ T1] mount_one_hugetlbfs+0x54/0xc8
[ 153.383233][ T1] init_hugetlbfs_fs+0x18c/0x268
[ 153.388068][ T1] do_one_initcall+0x6c/0x144
[ 153.392647][ T1] do_initcall_level+0x158/0x1c4
[ 153.397480][ T1] do_initcalls+0x68/0xb0
[ 153.401706][ T1] do_basic_setup+0x28/0x30
[ 153.406105][ T1] kernel_init_freeable+0x19c/0x228
[ 153.411208][ T1] kernel_init+0x14/0x208
[ 153.415436][ T1] ret_from_fork+0x10/0x18
[ 194.312926][ T1828] UBSAN: shift-out-of-bounds in ./include/linux/hugetlb.h:584:11
[ 194.320664][ T1828] shift exponent 4294967285 is too large for 32-bit type 'int'
[ 194.328103][ T1828] CPU: 194 PID: 1828 Comm: systemd-journal Tainted: G L 5.7.0-rc2-next-20200420 #1
[ 194.338558][ T1828] Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019
[ 194.349010][ T1828] Call trace:
[ 194.352183][ T1828] dump_backtrace+0x0/0x224
[ 194.356560][ T1828] show_stack+0x20/0x2c
[ 194.360595][ T1828] dump_stack+0xfc/0x184
[ 194.364724][ T1828] __ubsan_handle_shift_out_of_bounds+0x304/0x344
[ 194.371020][ T1828] hugetlb_total_pages+0x100/0x128
[ 194.376017][ T1828] vm_commit_limit+0x54/0xb0
[ 194.380484][ T1828] meminfo_proc_show+0x8f4/0xc4c
[ 194.385297][ T1828] seq_read+0x380/0x930
[ 194.389353][ T1828] pde_read+0x5c/0x78
[ 194.393232][ T1828] proc_reg_read+0x74/0xc0
[ 194.397528][ T1828] __vfs_read+0x84/0x1d0
[ 194.401646][ T1828] vfs_read+0xec/0x124
[ 194.405588][ T1828] ksys_read+0xb0/0x120
[ 194.409643][ T1828] __arm64_sys_read+0x54/0x88
[ 194.414195][ T1828] do_el0_svc+0x128/0x1dc
[ 194.418405][ T1828] el0_sync_handler+0x150/0x250
[ 194.423157][ T1828] el0_sync+0x164/0x180
[ 194.427425][ T1828] ================================================================================
[ 194.436930][ T1828] ================================================================================
[ 194.446355][ T1828] UBSAN: shift-out-of-bounds in mm/hugetlb.c:3564:23
[ 194.453190][ T1828] shift exponent 4294967285 is too large for 64-bit type 'unsigned long'
[ 194.461752][ T1828] CPU: 194 PID: 1828 Comm: systemd-journal Tainted: G L 5.7.0-rc2-next-20200420 #1
[ 194.472245][ T1828] Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019
[ 194.482720][ T1828] Call trace:
[ 194.485909][ T1828] dump_backtrace+0x0/0x224
[ 194.490312][ T1828] show_stack+0x20/0x2c
[ 194.494368][ T1828] dump_stack+0xfc/0x184
[ 194.498513][ T1828] __ubsan_handle_shift_out_of_bounds+0x304/0x344
[ 194.504828][ T1828] hugetlb_report_meminfo+0x25c/0x2ac
[ 194.510103][ T1828] meminfo_proc_show+0xc08/0xc4c
[ 194.514938][ T1828] seq_read+0x380/0x930
[ 194.518993][ T1828] pde_read+0x5c/0x78
[ 194.522874][ T1828] proc_reg_read+0x74/0xc0
[ 194.527190][ T1828] __vfs_read+0x84/0x1d0
[ 194.531335][ T1828] vfs_read+0xec/0x124
[ 194.535304][ T1828] ksys_read+0xb0/0x120
[ 194.539371][ T1828] __arm64_sys_read+0x54/0x88
[ 194.543958][ T1828] do_el0_svc+0x128/0x1dc
[ 194.548187][ T1828] el0_sync_handler+0x150/0x250
[ 194.552936][ T1828] el0_sync+0x164/0x180
>
> .../admin-guide/kernel-parameters.txt | 40 ++--
> Documentation/admin-guide/mm/hugetlbpage.rst | 35 ++++
> arch/arm64/mm/hugetlbpage.c | 30 +--
> arch/powerpc/mm/hugetlbpage.c | 30 +--
> arch/riscv/mm/hugetlbpage.c | 24 +--
> arch/s390/mm/hugetlbpage.c | 24 +--
> arch/sparc/mm/init_64.c | 43 +---
> arch/x86/mm/hugetlbpage.c | 23 +--
> include/linux/hugetlb.h | 2 +-
> mm/hugetlb.c | 190 +++++++++++++++---
> 10 files changed, 271 insertions(+), 170 deletions(-)
>
> --
> 2.25.2
>
>
More information about the Linuxppc-dev
mailing list