[PATCH AUTOSEL 5.5 37/75] Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"

Sasha Levin sashal at kernel.org
Sun Apr 19 00:08:32 AEST 2020


From: Nicholas Piggin <npiggin at gmail.com>

[ Upstream commit abc3fce76adbdfa8f87272c784b388cd20b46049 ]

This reverts commit ebb37cf3ffd39fdb6ec5b07111f8bb2f11d92c5f.

That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.

The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.

The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).

Fixes: ebb37cf3ffd3 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled")
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>
Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/powerpc/kernel/time.c | 44 +++++++++++---------------------------
 1 file changed, 13 insertions(+), 31 deletions(-)

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 1168e8b37e306..716f8d0960a7b 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -522,35 +522,6 @@ static inline void clear_irq_work_pending(void)
 		"i" (offsetof(struct paca_struct, irq_work_pending)));
 }
 
-void arch_irq_work_raise(void)
-{
-	preempt_disable();
-	set_irq_work_pending_flag();
-	/*
-	 * Non-nmi code running with interrupts disabled will replay
-	 * irq_happened before it re-enables interrupts, so setthe
-	 * decrementer there instead of causing a hardware exception
-	 * which would immediately hit the masked interrupt handler
-	 * and have the net effect of setting the decrementer in
-	 * irq_happened.
-	 *
-	 * NMI interrupts can not check this when they return, so the
-	 * decrementer hardware exception is raised, which will fire
-	 * when interrupts are next enabled.
-	 *
-	 * BookE does not support this yet, it must audit all NMI
-	 * interrupt handlers to ensure they call nmi_enter() so this
-	 * check would be correct.
-	 */
-	if (IS_ENABLED(CONFIG_BOOKE) || !irqs_disabled() || in_nmi()) {
-		set_dec(1);
-	} else {
-		hard_irq_disable();
-		local_paca->irq_happened |= PACA_IRQ_DEC;
-	}
-	preempt_enable();
-}
-
 #else /* 32-bit */
 
 DEFINE_PER_CPU(u8, irq_work_pending);
@@ -559,16 +530,27 @@ DEFINE_PER_CPU(u8, irq_work_pending);
 #define test_irq_work_pending()		__this_cpu_read(irq_work_pending)
 #define clear_irq_work_pending()	__this_cpu_write(irq_work_pending, 0)
 
+#endif /* 32 vs 64 bit */
+
 void arch_irq_work_raise(void)
 {
+	/*
+	 * 64-bit code that uses irq soft-mask can just cause an immediate
+	 * interrupt here that gets soft masked, if this is called under
+	 * local_irq_disable(). It might be possible to prevent that happening
+	 * by noticing interrupts are disabled and setting decrementer pending
+	 * to be replayed when irqs are enabled. The problem there is that
+	 * tracing can call irq_work_raise, including in code that does low
+	 * level manipulations of irq soft-mask state (e.g., trace_hardirqs_on)
+	 * which could get tangled up if we're messing with the same state
+	 * here.
+	 */
 	preempt_disable();
 	set_irq_work_pending_flag();
 	set_dec(1);
 	preempt_enable();
 }
 
-#endif /* 32 vs 64 bit */
-
 #else  /* CONFIG_IRQ_WORK */
 
 #define test_irq_work_pending()	0
-- 
2.20.1



More information about the Linuxppc-dev mailing list