[PATCH v2] powerpc/setup_64: Set cache-line-size based on cache-block-size

[Michael Ellerman]

Chris Packham <Chris.Packham at alliedtelesis.co.nz> writes:
> Hi All,
>
> On Wed, 2020-03-25 at 16:18 +1300, Chris Packham wrote:
>> If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not,
>> use
>> the block-size value for both. Per the devicetree spec cache-line-
>> size
>> is only needed if it differs from the block size.
>> 
>> Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
>> ---
>> It looks as though the bsizep = lsizep is not required per the spec
>> but it's
>> probably safer to retain it.
>> 
>> Changes in v2:
>> - Scott pointed out that u-boot should be filling in the cache
>> properties
>>   (which it does). But it does not specify a cache-line-size because
>> it
>>   provides a cache-block-size and the spec says you don't have to if
>> they are
>>   the same. So the error is in the parsing not in the devicetree
>> itself.
>> 
>
> Ping? This thread went kind of quiet.

I replied in the other thread:

  https://lore.kernel.org/linuxppc-dev/87369xx99u.fsf@mpe.ellerman.id.au/

But then the merge window happened which is a busy time.

What I'd really like is a v3 that incorporates the info I wrote in the
other thread and a Fixes tag.

If you feel like doing that, that would be great. Otherwise I'll do it
tomorrow.

cheers