[PATCH v6 4/7] ASoC: fsl_asrc: Support new property fsl,asrc-format

[Nicolin Chen]

Just some small comments.

On Wed, Apr 01, 2020 at 04:45:37PM +0800, Shengjiu Wang wrote:
> In order to align with new ESARC, we add new property fsl,asrc-format.
> The fsl,asrc-format can replace the fsl,asrc-width, driver
> can accept format from devicetree, don't need to convert it to
> format through width.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> ---
>  sound/soc/fsl/fsl_asrc.c     | 40 ++++++++++++++++++++++--------------
>  sound/soc/fsl/fsl_asrc.h     |  4 ++--
>  sound/soc/fsl/fsl_asrc_dma.c | 15 +++++++++++---
>  3 files changed, 39 insertions(+), 20 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index 4d3e51bfa949..eea19e2b723b 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -1052,16 +1047,31 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> -	ret = of_property_read_u32(np, "fsl,asrc-width",
> -				   &asrc->asrc_width);
> +	ret = of_property_read_u32(np, "fsl,asrc-format", &asrc->asrc_format);
>  	if (ret) {
> -		dev_err(&pdev->dev, "failed to get output width\n");
> -		return ret;
> +		ret = of_property_read_u32(np, "fsl,asrc-width", &width);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to get output width\n");

Similar to the comments against sound card driver:
"failed to decide output format"

> +			return ret;
> +		}
> +
> +		switch (width) {
> +		case 16:
> +			asrc->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
> +			break;
> +		case 24:
> +			asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
> +			break;
> +		default:
> +			dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n");

Should match what the code does after the change:
+			dev_warn(&pdev->dev,
+				 "unsupported width, use default S24_LE\n");

> +			asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
> +			break;
> +		}
>  	}
>  
> -	if (asrc->asrc_width != 16 && asrc->asrc_width != 24) {
> -		dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n");
> -		asrc->asrc_width = 24;
> +	if (!(FSL_ASRC_FORMATS & (1ULL << asrc->asrc_format))) {
> +		dev_warn(&pdev->dev, "unsupported format, switching to S24_LE\n");

Could fit 80 characters:
+		dev_warn(&pdev->dev, "unsupported width, use default S24_LE\n");

> diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
> index 5fe83aece25b..b15946e03380 100644
> --- a/sound/soc/fsl/fsl_asrc_dma.c
> +++ b/sound/soc/fsl/fsl_asrc_dma.c
> @@ -230,10 +230,19 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
>  		return -EINVAL;
>  	}
>  
> -	if (asrc->asrc_width == 16)
> +	bits = snd_pcm_format_physical_width(asrc->asrc_format);

Can we just use 'width' to match the function name?