[PATCH v4 00/25] Add support for OpenCAPI Persistent Memory devices

[Michael Ellerman]

"Alastair D'Silva" <alastair at d-silva.org> writes:
>> -----Original Message-----
>> From: Dan Williams <dan.j.williams at intel.com>
>> 
>> On Sun, Mar 29, 2020 at 10:23 PM Alastair D'Silva <alastair at d-silva.org>
>> wrote:
>> >
>> > This series adds support for OpenCAPI Persistent Memory devices on
>> > bare metal (arch/powernv), exposing them as nvdimms so that we can
>> > make use of the existing infrastructure. There already exists a driver
>> > for the same devices abstracted through PowerVM (arch/pseries):
>> > arch/powerpc/platforms/pseries/papr_scm.c
>> >
>> > These devices are connected via OpenCAPI, and present as LPC (lowest
>> coherence point) memory to the system, practically, that means that
>> memory on these cards could be treated as conventional, cache-coherent
>> memory.
>> >
>> > Since the devices are connected via OpenCAPI, they are not enumerated
>> via ACPI. Instead, OpenCAPI links present as pseudo-PCI bridges, with
>> devices below them.
>> >
>> > This series introduces a driver that exposes the memory on these cards as
>> nvdimms, with each card getting it's own bus. This is somewhat complicated
>> by the fact that the cards do not have out of band persistent storage for
>> metadata, so 1 SECTION_SIZE's (see SPARSEMEM) worth of storage is carved
>> out of the top of the card storage to implement the ndctl_config_* calls.
>> 
>> Is it really tied to section-size? Can't that change based on the configured
>> page-size? It's not clear to me why that would be the choice, but I'll dig into
>> the implementation.
>> 
>
> I had tried using PAGE_SIZE, but ran into problems carving off just 1 page and handing it to the kernel, while leaving the rest as pmem. That was a while ago though, so maybe I should retry it.
>
>> > The driver is not responsible for configuring the NPU (NVLink Processing
>> Unit) BARs to map the LPC memory from the card into the system's physical
>> address space, instead, it requests this to be done via OPAL calls (typically
>> implemented by Skiboot).
>> 
>> Are OPAL calls similar to ACPI DSMs? I.e. methods for the OS to invoke
>> platform firmware services? What's Skiboot?
>> 
>
> Yes, OPAL is the interface to firmware for POWER. Skiboot is the open-source (and only) implementation of OPAL.

  https://github.com/open-power/skiboot

In particular the tokens for calls are defined here:

  https://github.com/open-power/skiboot/blob/master/include/opal-api.h#L220

And you can grep for the token to find the implementation:

  https://github.com/open-power/skiboot/blob/master/hw/npu2-opencapi.c#L2328


cheers