[PATCH 00/11] opencapi: enable card reset and link retraining

[Frederic Barrat]

Le 24/09/2019 à 06:24, Alexey Kardashevskiy a écrit :
> Hi Fred,
> 
> what is this made against of? It does not apply on the master. Thanks,

It applies on v5.3. And I can see there's a conflict with the current 
state in the merge window. I'll resubmit.

   Fred



> On 10/09/2019 01:45, Frederic Barrat wrote:
>> This is the linux part of the work to use the PCI hotplug framework to
>> control an opencapi card so that it can be reset and re-read after
>> flashing a new FPGA image. I had posted it earlier as an RFC and this
>> version is mostly similar, with just some minor editing.
>>
>> It needs support in skiboot:
>> http://patchwork.ozlabs.org/project/skiboot/list/?series=129724
>> On an old skiboot, it will do nothing.
>>
>> A virtual PCI slot is created for the opencapi adapter, and its state
>> can be controlled through the pnv-php hotplug driver:
>>
>>    echo 0|1 > /sys/bus/pci/slots/OPENCAPI-<...>/power
>>
>> Note that the power to the card is not really turned off, as the card
>> needs to stay on to be flashed with a new image. Instead the card is
>> in reset.
>>
>> The first part of the series mostly deals with the pci/ioda state, as
>> the opencapi devices can now go away and the state needs to be cleaned
>> up.
>>
>> The second part is modifications to the PCI hotplug driver on powernv,
>> so that a virtual slot is created for the opencapi adapters found in
>> the device tree.
>>
>>
>>
>> Frederic Barrat (11):
>>    powerpc/powernv/ioda: Fix ref count for devices with their own PE
>>    powerpc/powernv/ioda: Protect PE list
>>    powerpc/powernv/ioda: set up PE on opencapi device when enabling
>>    powerpc/powernv/ioda: Release opencapi device
>>    powerpc/powernv/ioda: Find opencapi slot for a device node
>>    pci/hotplug/pnv-php: Remove erroneous warning
>>    pci/hotplug/pnv-php: Improve error msg on power state change failure
>>    pci/hotplug/pnv-php: Register opencapi slots
>>    pci/hotplug/pnv-php: Relax check when disabling slot
>>    pci/hotplug/pnv-php: Wrap warnings in macro
>>    ocxl: Add PCI hotplug dependency to Kconfig
>>
>>   arch/powerpc/include/asm/pnv-pci.h        |   1 +
>>   arch/powerpc/platforms/powernv/pci-ioda.c | 107 ++++++++++++++--------
>>   arch/powerpc/platforms/powernv/pci.c      |  10 +-
>>   drivers/misc/ocxl/Kconfig                 |   1 +
>>   drivers/pci/hotplug/pnv_php.c             |  82 ++++++++++-------
>>   5 files changed, 125 insertions(+), 76 deletions(-)
>>
>