[PATCH v7 04/12] powerpc/fsl_booke/32: introduce create_kaslr_tlb_entry() helper
Jason Yan
yanaijie at huawei.com
Fri Sep 20 19:45:38 AEST 2019
Add a new helper create_kaslr_tlb_entry() to create a tlb entry by the
virtual and physical address. This is a preparation to support boot kernel
at a randomized address.
Signed-off-by: Jason Yan <yanaijie at huawei.com>
Cc: Diana Craciun <diana.craciun at nxp.com>
Cc: Michael Ellerman <mpe at ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy at c-s.fr>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Cc: Paul Mackerras <paulus at samba.org>
Cc: Nicholas Piggin <npiggin at gmail.com>
Cc: Kees Cook <keescook at chromium.org>
Reviewed-by: Christophe Leroy <christophe.leroy at c-s.fr>
Reviewed-by: Diana Craciun <diana.craciun at nxp.com>
Tested-by: Diana Craciun <diana.craciun at nxp.com>
---
arch/powerpc/kernel/head_fsl_booke.S | 35 ++++++++++++++++++++++++++++
arch/powerpc/mm/mmu_decl.h | 1 +
2 files changed, 36 insertions(+)
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index adf0505dbe02..8c1928176ffe 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -1114,6 +1114,41 @@ __secondary_hold_acknowledge:
.long -1
#endif
+/*
+ * Create a 64M tlb by address and entry
+ * r3 - entry
+ * r4 - virtual address
+ * r5/r6 - physical address
+ */
+_GLOBAL(create_kaslr_tlb_entry)
+ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
+ mtspr SPRN_MAS0,r7 /* Write MAS0 */
+
+ lis r3,(MAS1_VALID|MAS1_IPROT)@h
+ ori r3,r3,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
+ mtspr SPRN_MAS1,r3 /* Write MAS1 */
+
+ lis r3,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@h
+ ori r3,r3,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@l
+ and r3,r3,r4
+ ori r3,r3,MAS2_M_IF_NEEDED at l
+ mtspr SPRN_MAS2,r3 /* Write MAS2(EPN) */
+
+#ifdef CONFIG_PHYS_64BIT
+ ori r8,r6,(MAS3_SW|MAS3_SR|MAS3_SX)
+ mtspr SPRN_MAS3,r8 /* Write MAS3(RPN) */
+ mtspr SPRN_MAS7,r5
+#else
+ ori r8,r5,(MAS3_SW|MAS3_SR|MAS3_SX)
+ mtspr SPRN_MAS3,r8 /* Write MAS3(RPN) */
+#endif
+
+ tlbwe /* Write TLB */
+ isync
+ sync
+ blr
+
/*
* Create a tlb entry with the same effective and physical address as
* the tlb entry used by the current running code. But set the TS to 1.
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 32c1a191c28a..a492ece08f64 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -142,6 +142,7 @@ extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
extern void adjust_total_lowmem(void);
extern int switch_to_as1(void);
extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
+void create_kaslr_tlb_entry(int entry, unsigned long virt, phys_addr_t phys);
#endif
extern void loadcam_entry(unsigned int index);
extern void loadcam_multi(int first_idx, int num, int tmp_idx);
--
2.17.2
More information about the Linuxppc-dev
mailing list