[RFC PATCH 24/27] powerpc/64s: interrupt return in C

Nicholas Piggin npiggin at gmail.com
Sun Sep 15 11:28:10 AEST 2019


Implement the bulk of interrupt return logic in C. The asm return code
must handle a few cases: restoring full GPRs, and emulating stack store.

The asm return code is moved into 64e for now. The new logic has made
allowance for 64e, but I don't have a full environment that works well
to test it, and even booting in emulated qemu is not great for stress
testing. 64e shouldn't be too far off working with this, given a bit
more testing and auditing of the logic.

This is slightly faster on a POWER9 (page fault speed increases about
1.1%), probably due to reduced mtmsrd.

Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 .../powerpc/include/asm/book3s/64/kup-radix.h |  10 +
 arch/powerpc/include/asm/switch_to.h          |   6 +
 arch/powerpc/kernel/entry_64.S                | 475 ++++--------------
 arch/powerpc/kernel/exceptions-64e.S          | 254 +++++++++-
 arch/powerpc/kernel/exceptions-64s.S          | 119 ++---
 arch/powerpc/kernel/process.c                 |   2 +
 arch/powerpc/kernel/syscall_64.c              | 157 +++++-
 arch/powerpc/kernel/vector.S                  |   2 +-
 8 files changed, 576 insertions(+), 449 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h
index 07058edc5970..762afbed4762 100644
--- a/arch/powerpc/include/asm/book3s/64/kup-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
@@ -60,6 +60,12 @@
 #include <asm/mmu.h>
 #include <asm/ptrace.h>
 
+static inline void kuap_restore_amr(struct pt_regs *regs)
+{
+	if (mmu_has_feature(MMU_FTR_RADIX_KUAP))
+		mtspr(SPRN_AMR, regs->kuap);
+}
+
 static inline void kuap_check_amr(void)
 {
 	if (IS_ENABLED(CONFIG_PPC_KUAP_DEBUG) && mmu_has_feature(MMU_FTR_RADIX_KUAP))
@@ -110,6 +116,10 @@ static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write)
 		    "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read");
 }
 #else /* CONFIG_PPC_KUAP */
+static inline void kuap_restore_amr(struct pt_regs *regs)
+{
+}
+
 static inline void kuap_check_amr(void)
 {
 }
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 476008bc3d08..b867b58b1093 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -23,7 +23,13 @@ extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
 extern int emulate_altivec(struct pt_regs *);
 
+#ifdef CONFIG_PPC_BOOK3S_64
 void restore_math(struct pt_regs *regs);
+#else
+static inline void restore_math(struct pt_regs *regs)
+{
+}
+#endif
 
 void restore_tm_state(struct pt_regs *regs);
 
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 15bc2a872a76..b2e68f5ca8f7 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -16,6 +16,7 @@
 
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <asm/cache.h>
 #include <asm/unistd.h>
 #include <asm/processor.h>
 #include <asm/page.h>
@@ -279,7 +280,7 @@ flush_count_cache:
  * state of one is saved on its kernel stack.  Then the state
  * of the other is restored from its kernel stack.  The memory
  * management hardware is updated to the second process's state.
- * Finally, we can return to the second process, via ret_from_except.
+ * Finally, we can return to the second process, via interrupt_return.
  * On entry, r3 points to the THREAD for the current task, r4
  * points to the THREAD for the new task.
  *
@@ -433,408 +434,150 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 	addi	r1,r1,SWITCH_FRAME_SIZE
 	blr
 
-	.align	7
-_GLOBAL(ret_from_except)
-	ld	r11,_TRAP(r1)
-	andi.	r0,r11,1
-	bne	ret_from_except_lite
-	REST_NVGPRS(r1)
-
-_GLOBAL(ret_from_except_lite)
+#ifdef CONFIG_PPC_BOOK3S
 	/*
-	 * Disable interrupts so that current_thread_info()->flags
-	 * can't change between when we test it and when we return
-	 * from the interrupt.
-	 */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	0
-#else
-	li	r10,MSR_RI
-	mtmsrd	r10,1		  /* Update machine state */
-#endif /* CONFIG_PPC_BOOK3E */
+	 * If MSR EE/RI was never enabled, IRQs not reconciled, NVGPRs not
+	 * touched, AMR not set, no exit work created, then this can be used.
+	 */
+	.balign IFETCH_ALIGN_BYTES
+_GLOBAL(fast_interrupt_return)
+	ld	r4,_MSR(r1)
+	andi.	r0,r4,MSR_PR
+	bne	.Lfast_user_interrupt_return
+	andi.	r0,r4,MSR_RI
+	bne+	.Lfast_kernel_interrupt_return
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	unrecoverable_exception
+	b	. /* should not get here */
 
-	ld	r9, PACA_THREAD_INFO(r13)
-	ld	r3,_MSR(r1)
-#ifdef CONFIG_PPC_BOOK3E
-	ld	r10,PACACURRENT(r13)
-#endif /* CONFIG_PPC_BOOK3E */
-	ld	r4,TI_FLAGS(r9)
-	andi.	r3,r3,MSR_PR
-	beq	resume_kernel
-#ifdef CONFIG_PPC_BOOK3E
-	lwz	r3,(THREAD+THREAD_DBCR0)(r10)
-#endif /* CONFIG_PPC_BOOK3E */
+	.balign IFETCH_ALIGN_BYTES
+_GLOBAL(interrupt_return)
+	REST_NVGPRS(r1)
 
-	/* Check current_thread_info()->flags */
-	andi.	r0,r4,_TIF_USER_WORK_MASK
-	bne	1f
-#ifdef CONFIG_PPC_BOOK3E
-	/*
-	 * Check to see if the dbcr0 register is set up to debug.
-	 * Use the internal debug mode bit to do this.
-	 */
-	andis.	r0,r3,DBCR0_IDM at h
-	beq	restore
-	mfmsr	r0
-	rlwinm	r0,r0,0,~MSR_DE	/* Clear MSR.DE */
-	mtmsr	r0
-	mtspr	SPRN_DBCR0,r3
-	li	r10, -1
-	mtspr	SPRN_DBSR,r10
-	b	restore
-#else
+	.balign IFETCH_ALIGN_BYTES
+_GLOBAL(interrupt_return_lite)
+	ld	r4,_MSR(r1)
+	andi.	r0,r4,MSR_PR
+	beq	kernel_interrupt_return
+user_interrupt_return:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	restore_math
-	b	restore
-#endif
-1:	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq	2f
-	bl	restore_interrupts
-	SCHEDULE_USER
-	b	ret_from_except_lite
-2:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	andi.	r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM
-	bne	3f		/* only restore TM if nothing else to do */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	restore_tm_state
-	b	restore
-3:
-#endif
-	bl	save_nvgprs
-	/*
-	 * Use a non volatile GPR to save and restore our thread_info flags
-	 * across the call to restore_interrupts.
-	 */
-	mr	r30,r4
-	bl	restore_interrupts
-	mr	r4,r30
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_notify_resume
-	b	ret_from_except
-
-resume_kernel:
-	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
-	andis.	r8,r4,_TIF_EMULATE_STACK_STORE at h
-	beq+	1f
+	bl	interrupt_exit_user_prepare
+	cmpdi	r3,0
+	bne-	.Lrestore_nvgprs
 
-	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
+.Lfast_user_interrupt_return:
+	ld	r11,_NIP(r1)
+	ld	r12,_MSR(r1)
+BEGIN_FTR_SECTION
+	ld	r10,_PPR(r1)
+	mtspr	SPRN_PPR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
 
-	ld	r3,GPR1(r1)
-	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
-	mr	r4,r1			/* src:  current exception frame */
-	mr	r1,r3			/* Reroute the trampoline frame to r1 */
+BEGIN_FTR_SECTION
+	stdcx.	r0,0,r1		/* to clear the reservation */
+FTR_SECTION_ELSE
+	ldarx	r0,0,r1
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
 
-	/* Copy from the original to the trampoline. */
-	li	r5,INT_FRAME_SIZE/8	/* size: INT_FRAME_SIZE */
-	li	r6,0			/* start offset: 0 */
-	mtctr	r5
-2:	ldx	r0,r6,r4
-	stdx	r0,r6,r3
-	addi	r6,r6,8
-	bdnz	2b
-
-	/* Do real store operation to complete stdu */
-	ld	r5,GPR1(r1)
-	std	r8,0(r5)
-
-	/* Clear _TIF_EMULATE_STACK_STORE flag */
-	lis	r11,_TIF_EMULATE_STACK_STORE at h
-	addi	r5,r9,TI_FLAGS
-0:	ldarx	r4,0,r5
-	andc	r4,r4,r11
-	stdcx.	r4,0,r5
-	bne-	0b
-1:
-
-#ifdef CONFIG_PREEMPT
-	/* Check if we need to preempt */
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq+	restore
-	/* Check that preempt_count() == 0 and interrupts are enabled */
-	lwz	r8,TI_PREEMPT(r9)
-	cmpwi	cr0,r8,0
-	bne	restore
-	ld	r0,SOFTE(r1)
-	andi.	r0,r0,IRQS_DISABLED
-	bne	restore
+	ld	r3,_CCR(r1)
+	ld	r4,_LINK(r1)
+	ld	r5,_CTR(r1)
+	ld	r6,_XER(r1)
+	li	r0,0
 
-	/*
-	 * Here we are preempting the current task. We want to make
-	 * sure we are soft-disabled first and reconcile irq state.
-	 */
-	RECONCILE_IRQ_STATE(r3,r4)
-	bl	preempt_schedule_irq
+	REST_4GPRS(7, r1)
+	REST_2GPRS(11, r1)
+	REST_GPR(13, r1)
 
-	/*
-	 * arch_local_irq_restore() from preempt_schedule_irq above may
-	 * enable hard interrupt but we really should disable interrupts
-	 * when we return from the interrupt, and so that we don't get
-	 * interrupted after loading SRR0/1.
-	 */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	0
-#else
-	li	r10,MSR_RI
-	mtmsrd	r10,1		  /* Update machine state */
-#endif /* CONFIG_PPC_BOOK3E */
-#endif /* CONFIG_PREEMPT */
+	mtcr	r3
+	mtlr	r4
+	mtctr	r5
+	mtspr	SPRN_XER,r6
 
-	.globl	fast_exc_return_irq
-fast_exc_return_irq:
-restore:
-	/*
-	 * This is the main kernel exit path. First we check if we
-	 * are about to re-enable interrupts
-	 */
-	ld	r5,SOFTE(r1)
-	lbz	r6,PACAIRQSOFTMASK(r13)
-	andi.	r5,r5,IRQS_DISABLED
-	bne	.Lrestore_irq_off
+	REST_4GPRS(2, r1)
+	REST_GPR(6, r1)
+	REST_GPR(0, r1)
+	REST_GPR(1, r1)
+	RFI_TO_USER
+	b	.	/* prevent speculative execution */
 
-	/* We are enabling, were we already enabled ? Yes, just return */
-	andi.	r6,r6,IRQS_DISABLED
-	beq	cr0,.Ldo_restore
+.Lrestore_nvgprs:
+	REST_NVGPRS(r1)
+	b	.Lfast_user_interrupt_return
 
-	/*
-	 * We are about to soft-enable interrupts (we are hard disabled
-	 * at this point). We check if there's anything that needs to
-	 * be replayed first.
-	 */
-	lbz	r0,PACAIRQHAPPENED(r13)
-	cmpwi	cr0,r0,0
-	bne-	.Lrestore_check_irq_replay
+	.balign IFETCH_ALIGN_BYTES
+kernel_interrupt_return:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	interrupt_exit_kernel_prepare
+	cmpdi	cr1,r3,0
 
-	/*
-	 * Get here when nothing happened while soft-disabled, just
-	 * soft-enable and move-on. We will hard-enable as a side
-	 * effect of rfi
-	 */
-.Lrestore_no_replay:
-	TRACE_ENABLE_INTS
-	li	r0,IRQS_ENABLED
-	stb	r0,PACAIRQSOFTMASK(r13);
+.Lfast_kernel_interrupt_return:
+	ld	r11,_NIP(r1)
+	ld	r12,_MSR(r1)
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
 
-	/*
-	 * Final return path. BookE is handled in a different file
-	 */
-.Ldo_restore:
-#ifdef CONFIG_PPC_BOOK3E
-	b	exception_return_book3e
-#else
-	/*
-	 * Clear the reservation. If we know the CPU tracks the address of
-	 * the reservation then we can potentially save some cycles and use
-	 * a larx. On POWER6 and POWER7 this is significantly faster.
-	 */
 BEGIN_FTR_SECTION
 	stdcx.	r0,0,r1		/* to clear the reservation */
 FTR_SECTION_ELSE
-	ldarx	r4,0,r1
+	ldarx	r0,0,r1
 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
 
-	/*
-	 * Some code path such as load_up_fpu or altivec return directly
-	 * here. They run entirely hard disabled and do not alter the
-	 * interrupt state. They also don't use lwarx/stwcx. and thus
-	 * are known not to leave dangling reservations.
-	 */
-	.globl	fast_exception_return
-fast_exception_return:
-	ld	r3,_MSR(r1)
-	ld	r4,_CTR(r1)
-	ld	r0,_LINK(r1)
-	mtctr	r4
-	mtlr	r0
-	ld	r4,_XER(r1)
-	mtspr	SPRN_XER,r4
-
-	kuap_check_amr r5, r6
-
-	REST_8GPRS(5, r1)
+	ld	r3,_CCR(r1)
+	ld	r4,_LINK(r1)
+	ld	r5,_CTR(r1)
+	ld	r6,_XER(r1)
+	li	r0,0
 
-	andi.	r0,r3,MSR_RI
-	beq-	.Lunrecov_restore
+	REST_4GPRS(7, r1)
+	REST_2GPRS(11, r1)
 
-	/*
-	 * Clear RI before restoring r13.  If we are returning to
-	 * userspace and we take an exception after restoring r13,
-	 * we end up corrupting the userspace r13 value.
-	 */
-	li	r4,0
-	mtmsrd	r4,1
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	/* TM debug */
-	std	r3, PACATMSCRATCH(r13) /* Stash returned-to MSR */
-#endif
-	/*
-	 * r13 is our per cpu area, only restore it if we are returning to
-	 * userspace the value stored in the stack frame may belong to
-	 * another CPU.
-	 */
-	andi.	r0,r3,MSR_PR
-	beq	1f
-BEGIN_FTR_SECTION
-	/* Restore PPR */
-	ld	r2,_PPR(r1)
-	mtspr	SPRN_PPR,r2
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
-	ACCOUNT_CPU_USER_EXIT(r13, r2, r4)
-	REST_GPR(13, r1)
+	bne-	cr1,1f /* emulate stack store */
+	mtcr	r3
+	mtlr	r4
+	mtctr	r5
+	mtspr	SPRN_XER,r6
 
 	/*
-	 * We don't need to restore AMR on the way back to userspace for KUAP.
-	 * The value of AMR only matters while we're in the kernel.
+	 * Leaving a stale exception_marker on the stack can confuse
+	 * the reliable stack unwinder later on. Clear it.
 	 */
-	mtspr	SPRN_SRR1,r3
-
-	ld	r2,_CCR(r1)
-	mtcrf	0xFF,r2
-	ld	r2,_NIP(r1)
-	mtspr	SPRN_SRR0,r2
+	std	r0,STACK_FRAME_OVERHEAD-16(r1)
 
-	ld	r0,GPR0(r1)
-	ld	r2,GPR2(r1)
-	ld	r3,GPR3(r1)
-	ld	r4,GPR4(r1)
-	ld	r1,GPR1(r1)
-	RFI_TO_USER
+	REST_4GPRS(2, r1)
+	REST_GPR(6, r1)
+	REST_GPR(0, r1)
+	REST_GPR(1, r1)
+	RFI_TO_KERNEL
 	b	.	/* prevent speculative execution */
 
-1:	mtspr	SPRN_SRR1,r3
-
-	ld	r2,_CCR(r1)
-	mtcrf	0xFF,r2
-	ld	r2,_NIP(r1)
-	mtspr	SPRN_SRR0,r2
+1:	mtcr	r3
+	mtlr	r4
+	mtctr	r5
+	mtspr	SPRN_XER,r6
 
 	/*
 	 * Leaving a stale exception_marker on the stack can confuse
 	 * the reliable stack unwinder later on. Clear it.
 	 */
-	li	r2,0
-	std	r2,STACK_FRAME_OVERHEAD-16(r1)
+	std	r0,STACK_FRAME_OVERHEAD-16(r1)
 
-	ld	r0,GPR0(r1)
-	ld	r2,GPR2(r1)
-	ld	r3,GPR3(r1)
+	REST_4GPRS(2, r1)
+	REST_GPR(6, r1)
+	REST_GPR(0, r1)
 
-	kuap_restore_amr r4
+	/* Nasty emulate stack store case. */
+	std	r9,PACA_EXGEN+0(r13)
+	addi	r9,r1,INT_FRAME_SIZE /* get original r1 */
+	REST_GPR(1, r1)
+	std	r9,0(r1)
+	ld	r9,PACA_EXGEN+0(r13)
 
-	ld	r4,GPR4(r1)
-	ld	r1,GPR1(r1)
 	RFI_TO_KERNEL
 	b	.	/* prevent speculative execution */
-
-#endif /* CONFIG_PPC_BOOK3E */
-
-	/*
-	 * We are returning to a context with interrupts soft disabled.
-	 *
-	 * However, we may also about to hard enable, so we need to
-	 * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
-	 * or that bit can get out of sync and bad things will happen
-	 */
-.Lrestore_irq_off:
-	ld	r3,_MSR(r1)
-	lbz	r7,PACAIRQHAPPENED(r13)
-	andi.	r0,r3,MSR_EE
-	beq	1f
-	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
-	stb	r7,PACAIRQHAPPENED(r13)
-1:
-#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
-	/* The interrupt should not have soft enabled. */
-	lbz	r7,PACAIRQSOFTMASK(r13)
-1:	tdeqi	r7,IRQS_ENABLED
-	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
-#endif
-	b	.Ldo_restore
-
-	/*
-	 * Something did happen, check if a re-emit is needed
-	 * (this also clears paca->irq_happened)
-	 */
-.Lrestore_check_irq_replay:
-	/* XXX: We could implement a fast path here where we check
-	 * for irq_happened being just 0x01, in which case we can
-	 * clear it and return. That means that we would potentially
-	 * miss a decrementer having wrapped all the way around.
-	 *
-	 * Still, this might be useful for things like hash_page
-	 */
-	bl	__check_irq_replay
-	cmpwi	cr0,r3,0
-	beq	.Lrestore_no_replay
- 
-	/*
-	 * We need to re-emit an interrupt. We do so by re-using our
-	 * existing exception frame. We first change the trap value,
-	 * but we need to ensure we preserve the low nibble of it
-	 */
-	ld	r4,_TRAP(r1)
-	clrldi	r4,r4,60
-	or	r4,r4,r3
-	std	r4,_TRAP(r1)
-
-	/*
-	 * PACA_IRQ_HARD_DIS won't always be set here, so set it now
-	 * to reconcile the IRQ state. Tracing is already accounted for.
-	 */
-	lbz	r4,PACAIRQHAPPENED(r13)
-	ori	r4,r4,PACA_IRQ_HARD_DIS
-	stb	r4,PACAIRQHAPPENED(r13)
-
-	/*
-	 * Then find the right handler and call it. Interrupts are
-	 * still soft-disabled and we keep them that way.
-	*/
-	cmpwi	cr0,r3,0x500
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
- 	bl	do_IRQ
-	b	ret_from_except
-1:	cmpwi	cr0,r3,0xf00
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	performance_monitor_exception
-	b	ret_from_except
-1:	cmpwi	cr0,r3,0xe60
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	handle_hmi_exception
-	b	ret_from_except
-1:	cmpwi	cr0,r3,0x900
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	timer_interrupt
-	b	ret_from_except
-#ifdef CONFIG_PPC_DOORBELL
-1:
-#ifdef CONFIG_PPC_BOOK3E
-	cmpwi	cr0,r3,0x280
-#else
-	cmpwi	cr0,r3,0xa00
-#endif /* CONFIG_PPC_BOOK3E */
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	doorbell_exception
-#endif /* CONFIG_PPC_DOORBELL */
-1:	b	ret_from_except /* What else to do here ? */
- 
-.Lunrecov_restore:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	unrecoverable_exception
-	b	.Lunrecov_restore
-
-_ASM_NOKPROBE_SYMBOL(ret_from_except);
-_ASM_NOKPROBE_SYMBOL(ret_from_except_lite);
-_ASM_NOKPROBE_SYMBOL(resume_kernel);
-_ASM_NOKPROBE_SYMBOL(fast_exc_return_irq);
-_ASM_NOKPROBE_SYMBOL(restore);
-_ASM_NOKPROBE_SYMBOL(fast_exception_return);
-
+#endif /* CONFIG_PPC_BOOK3S */
 
 #ifdef CONFIG_PPC_RTAS
 /*
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 829950b96d29..5443f84bb0ab 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1073,17 +1073,161 @@ alignment_more:
 	bl	alignment_exception
 	b	ret_from_except
 
-/*
- * We branch here from entry_64.S for the last stage of the exception
- * return code path. MSR:EE is expected to be off at that point
- */
-_GLOBAL(exception_return_book3e)
-	b	1f
+	.align	7
+_GLOBAL(ret_from_except)
+	ld	r11,_TRAP(r1)
+	andi.	r0,r11,1
+	bne	ret_from_except_lite
+	REST_NVGPRS(r1)
+
+_GLOBAL(ret_from_except_lite)
+	/*
+	 * Disable interrupts so that current_thread_info()->flags
+	 * can't change between when we test it and when we return
+	 * from the interrupt.
+	 */
+	wrteei	0
+
+	ld	r9, PACA_THREAD_INFO(r13)
+	ld	r3,_MSR(r1)
+	ld	r10,PACACURRENT(r13)
+	ld	r4,TI_FLAGS(r9)
+	andi.	r3,r3,MSR_PR
+	beq	resume_kernel
+	lwz	r3,(THREAD+THREAD_DBCR0)(r10)
+
+	/* Check current_thread_info()->flags */
+	andi.	r0,r4,_TIF_USER_WORK_MASK
+	bne	1f
+	/*
+	 * Check to see if the dbcr0 register is set up to debug.
+	 * Use the internal debug mode bit to do this.
+	 */
+	andis.	r0,r3,DBCR0_IDM at h
+	beq	restore
+	mfmsr	r0
+	rlwinm	r0,r0,0,~MSR_DE	/* Clear MSR.DE */
+	mtmsr	r0
+	mtspr	SPRN_DBCR0,r3
+	li	r10, -1
+	mtspr	SPRN_DBSR,r10
+	b	restore
+1:	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq	2f
+	bl	restore_interrupts
+	SCHEDULE_USER
+	b	ret_from_except_lite
+2:
+	bl	save_nvgprs
+	/*
+	 * Use a non volatile GPR to save and restore our thread_info flags
+	 * across the call to restore_interrupts.
+	 */
+	mr	r30,r4
+	bl	restore_interrupts
+	mr	r4,r30
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_notify_resume
+	b	ret_from_except
+
+resume_kernel:
+	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
+	andis.	r8,r4,_TIF_EMULATE_STACK_STORE at h
+	beq+	1f
+
+	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
+
+	ld	r3,GPR1(r1)
+	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
+	mr	r4,r1			/* src:  current exception frame */
+	mr	r1,r3			/* Reroute the trampoline frame to r1 */
+
+	/* Copy from the original to the trampoline. */
+	li	r5,INT_FRAME_SIZE/8	/* size: INT_FRAME_SIZE */
+	li	r6,0			/* start offset: 0 */
+	mtctr	r5
+2:	ldx	r0,r6,r4
+	stdx	r0,r6,r3
+	addi	r6,r6,8
+	bdnz	2b
+
+	/* Do real store operation to complete stdu */
+	ld	r5,GPR1(r1)
+	std	r8,0(r5)
+
+	/* Clear _TIF_EMULATE_STACK_STORE flag */
+	lis	r11,_TIF_EMULATE_STACK_STORE at h
+	addi	r5,r9,TI_FLAGS
+0:	ldarx	r4,0,r5
+	andc	r4,r4,r11
+	stdcx.	r4,0,r5
+	bne-	0b
+1:
+
+#ifdef CONFIG_PREEMPT
+	/* Check if we need to preempt */
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq+	restore
+	/* Check that preempt_count() == 0 and interrupts are enabled */
+	lwz	r8,TI_PREEMPT(r9)
+	cmpwi	cr0,r8,0
+	bne	restore
+	ld	r0,SOFTE(r1)
+	andi.	r0,r0,IRQS_DISABLED
+	bne	restore
+
+	/*
+	 * Here we are preempting the current task. We want to make
+	 * sure we are soft-disabled first and reconcile irq state.
+	 */
+	RECONCILE_IRQ_STATE(r3,r4)
+	bl	preempt_schedule_irq
+
+	/*
+	 * arch_local_irq_restore() from preempt_schedule_irq above may
+	 * enable hard interrupt but we really should disable interrupts
+	 * when we return from the interrupt, and so that we don't get
+	 * interrupted after loading SRR0/1.
+	 */
+	wrteei	0
+#endif /* CONFIG_PREEMPT */
+
+restore:
+	/*
+	 * This is the main kernel exit path. First we check if we
+	 * are about to re-enable interrupts
+	 */
+	ld	r5,SOFTE(r1)
+	lbz	r6,PACAIRQSOFTMASK(r13)
+	andi.	r5,r5,IRQS_DISABLED
+	bne	.Lrestore_irq_off
+
+	/* We are enabling, were we already enabled ? Yes, just return */
+	andi.	r6,r6,IRQS_DISABLED
+	beq	cr0,fast_exception_return
+
+	/*
+	 * We are about to soft-enable interrupts (we are hard disabled
+	 * at this point). We check if there's anything that needs to
+	 * be replayed first.
+	 */
+	lbz	r0,PACAIRQHAPPENED(r13)
+	cmpwi	cr0,r0,0
+	bne-	.Lrestore_check_irq_replay
+
+	/*
+	 * Get here when nothing happened while soft-disabled, just
+	 * soft-enable and move-on. We will hard-enable as a side
+	 * effect of rfi
+	 */
+.Lrestore_no_replay:
+	TRACE_ENABLE_INTS
+	li	r0,IRQS_ENABLED
+	stb	r0,PACAIRQSOFTMASK(r13);
 
 /* This is the return from load_up_fpu fast path which could do with
  * less GPR restores in fact, but for now we have a single return path
  */
-	.globl fast_exception_return
 fast_exception_return:
 	wrteei	0
 1:	mr	r0,r13
@@ -1124,6 +1268,102 @@ fast_exception_return:
 	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
 	rfi
 
+	/*
+	 * We are returning to a context with interrupts soft disabled.
+	 *
+	 * However, we may also about to hard enable, so we need to
+	 * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
+	 * or that bit can get out of sync and bad things will happen
+	 */
+.Lrestore_irq_off:
+	ld	r3,_MSR(r1)
+	lbz	r7,PACAIRQHAPPENED(r13)
+	andi.	r0,r3,MSR_EE
+	beq	1f
+	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
+	stb	r7,PACAIRQHAPPENED(r13)
+1:
+#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
+	/* The interrupt should not have soft enabled. */
+	lbz	r7,PACAIRQSOFTMASK(r13)
+1:	tdeqi	r7,IRQS_ENABLED
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
+#endif
+	b	fast_exception_return
+
+	/*
+	 * Something did happen, check if a re-emit is needed
+	 * (this also clears paca->irq_happened)
+	 */
+.Lrestore_check_irq_replay:
+	/* XXX: We could implement a fast path here where we check
+	 * for irq_happened being just 0x01, in which case we can
+	 * clear it and return. That means that we would potentially
+	 * miss a decrementer having wrapped all the way around.
+	 *
+	 * Still, this might be useful for things like hash_page
+	 */
+	bl	__check_irq_replay
+	cmpwi	cr0,r3,0
+	beq	.Lrestore_no_replay
+
+	/*
+	 * We need to re-emit an interrupt. We do so by re-using our
+	 * existing exception frame. We first change the trap value,
+	 * but we need to ensure we preserve the low nibble of it
+	 */
+	ld	r4,_TRAP(r1)
+	clrldi	r4,r4,60
+	or	r4,r4,r3
+	std	r4,_TRAP(r1)
+
+	/*
+	 * PACA_IRQ_HARD_DIS won't always be set here, so set it now
+	 * to reconcile the IRQ state. Tracing is already accounted for.
+	 */
+	lbz	r4,PACAIRQHAPPENED(r13)
+	ori	r4,r4,PACA_IRQ_HARD_DIS
+	stb	r4,PACAIRQHAPPENED(r13)
+
+	/*
+	 * Then find the right handler and call it. Interrupts are
+	 * still soft-disabled and we keep them that way.
+	*/
+	cmpwi	cr0,r3,0x500
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	do_IRQ
+	b	ret_from_except
+1:	cmpwi	cr0,r3,0xf00
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	performance_monitor_exception
+	b	ret_from_except
+1:	cmpwi	cr0,r3,0xe60
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	handle_hmi_exception
+	b	ret_from_except
+1:	cmpwi	cr0,r3,0x900
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	timer_interrupt
+	b	ret_from_except
+#ifdef CONFIG_PPC_DOORBELL
+1:
+	cmpwi	cr0,r3,0x280
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	doorbell_exception
+#endif /* CONFIG_PPC_DOORBELL */
+1:	b	ret_from_except /* What else to do here ? */
+
+_ASM_NOKPROBE_SYMBOL(ret_from_except);
+_ASM_NOKPROBE_SYMBOL(ret_from_except_lite);
+_ASM_NOKPROBE_SYMBOL(resume_kernel);
+_ASM_NOKPROBE_SYMBOL(restore);
+_ASM_NOKPROBE_SYMBOL(fast_exception_return);
+
 /*
  * Trampolines used when spotting a bad kernel stack pointer in
  * the exception entry code.
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index af1264cd005f..269edd1460be 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -575,6 +575,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	std	r10,GPR12(r1)
 	std	r11,GPR13(r1)
 
+	SAVE_NVGPRS(r1)
+
 	.if IDAR
 	.if IISIDE
 	ld	r10,_NIP(r1)
@@ -611,7 +613,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	mfspr	r11,SPRN_XER		/* save XER in stackframe	*/
 	std	r10,SOFTE(r1)
 	std	r11,_XER(r1)
-	li	r9,(IVEC)+1
+	li	r9,IVEC
 	std	r9,_TRAP(r1)		/* set trap number		*/
 	li	r10,0
 	ld	r11,exception_marker at toc(r2)
@@ -918,7 +920,6 @@ EXC_COMMON_BEGIN(system_reset_common)
 	ld	r1,PACA_NMI_EMERG_SP(r13)
 	subi	r1,r1,INT_FRAME_SIZE
 	__GEN_COMMON_BODY system_reset
-	bl	save_nvgprs
 	/*
 	 * Set IRQS_ALL_DISABLED unconditionally so arch_irqs_disabled does
 	 * the right thing. We do not want to reconcile because that goes
@@ -1093,7 +1094,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	li	r10,MSR_RI
 	mtmsrd	r10,1
 
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	machine_check_early
 	std	r3,RESULT(r1)	/* Save result */
@@ -1186,10 +1186,9 @@ EXC_COMMON_BEGIN(machine_check_common)
 	/* Enable MSR_RI when finished with PACA_EXMC */
 	li	r10,MSR_RI
 	mtmsrd 	r10,1
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	machine_check_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM machine_check
 
@@ -1356,20 +1355,19 @@ BEGIN_MMU_FTR_SECTION
 	bl	do_slb_fault
 	cmpdi	r3,0
 	bne-	1f
-	b	fast_exception_return
+	b	fast_interrupt_return
 1:	/* Error case */
 MMU_FTR_SECTION_ELSE
 	/* Radix case, access is outside page table range */
 	li	r3,-EFAULT
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 	std	r3,RESULT(r1)
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	ld	r4,_DAR(r1)
 	ld	r5,RESULT(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_bad_slb_fault
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM data_access_slb
 
@@ -1449,20 +1447,19 @@ BEGIN_MMU_FTR_SECTION
 	bl	do_slb_fault
 	cmpdi	r3,0
 	bne-	1f
-	b	fast_exception_return
+	b	fast_interrupt_return
 1:	/* Error case */
 MMU_FTR_SECTION_ELSE
 	/* Radix case, access is outside page table range */
 	li	r3,-EFAULT
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 	std	r3,RESULT(r1)
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	ld	r4,_DAR(r1)
 	ld	r5,RESULT(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_bad_slb_fault
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM instruction_access_slb
 
@@ -1510,7 +1507,7 @@ EXC_COMMON_BEGIN(hardware_interrupt_common)
 	RUNLATCH_ON
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_IRQ
-	b	ret_from_except_lite
+	b	interrupt_return_lite
 
 	GEN_KVM hardware_interrupt
 
@@ -1536,10 +1533,9 @@ EXC_VIRT_BEGIN(alignment, 0x4600, 0x100)
 EXC_VIRT_END(alignment, 0x4600, 0x100)
 EXC_COMMON_BEGIN(alignment_common)
 	GEN_COMMON alignment
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	alignment_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM alignment
 
@@ -1600,10 +1596,9 @@ EXC_COMMON_BEGIN(program_check_common)
 	__ISTACK(program_check)=1
 	__GEN_COMMON_BODY program_check
 3:
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	program_check_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM program_check
 
@@ -1634,7 +1629,6 @@ EXC_VIRT_END(fp_unavailable, 0x4800, 0x100)
 EXC_COMMON_BEGIN(fp_unavailable_common)
 	GEN_COMMON fp_unavailable
 	bne	1f			/* if from user, just load it up */
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	kernel_fp_unavailable_exception
@@ -1651,14 +1645,13 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_TM)
 #endif
 	bl	load_up_fpu
-	b	fast_exception_return
+	b	fast_interrupt_return
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	fp_unavailable_tm
-	b	ret_from_except
+	b	interrupt_return
 #endif
 
 	GEN_KVM fp_unavailable
@@ -1701,7 +1694,7 @@ EXC_COMMON_BEGIN(decrementer_common)
 	RUNLATCH_ON
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	timer_interrupt
-	b	ret_from_except_lite
+	b	interrupt_return_lite
 
 	GEN_KVM decrementer
 
@@ -1792,7 +1785,7 @@ EXC_COMMON_BEGIN(doorbell_super_common)
 #else
 	bl	unknown_exception
 #endif
-	b	ret_from_except_lite
+	b	interrupt_return_lite
 
 	GEN_KVM doorbell_super
 
@@ -1977,10 +1970,9 @@ EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100)
 EXC_VIRT_END(single_step, 0x4d00, 0x100)
 EXC_COMMON_BEGIN(single_step_common)
 	GEN_COMMON single_step
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	single_step_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM single_step
 
@@ -2015,7 +2007,6 @@ EXC_VIRT_BEGIN(h_data_storage, 0x4e00, 0x20)
 EXC_VIRT_END(h_data_storage, 0x4e00, 0x20)
 EXC_COMMON_BEGIN(h_data_storage_common)
 	GEN_COMMON h_data_storage
-	bl      save_nvgprs
 	addi    r3,r1,STACK_FRAME_OVERHEAD
 BEGIN_MMU_FTR_SECTION
 	ld	r4,_DAR(r1)
@@ -2024,7 +2015,7 @@ BEGIN_MMU_FTR_SECTION
 MMU_FTR_SECTION_ELSE
 	bl      unknown_exception
 ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX)
-	b       ret_from_except
+	b       interrupt_return
 
 	GEN_KVM h_data_storage
 
@@ -2049,10 +2040,9 @@ EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20)
 EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20)
 EXC_COMMON_BEGIN(h_instr_storage_common)
 	GEN_COMMON h_instr_storage
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	unknown_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM h_instr_storage
 
@@ -2075,10 +2065,9 @@ EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20)
 EXC_VIRT_END(emulation_assist, 0x4e40, 0x20)
 EXC_COMMON_BEGIN(emulation_assist_common)
 	GEN_COMMON emulation_assist
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	emulation_assist_interrupt
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM emulation_assist
 
@@ -2158,10 +2147,9 @@ EXC_COMMON_BEGIN(hmi_exception_common)
 	GEN_COMMON hmi_exception
 	FINISH_NAP
 	RUNLATCH_ON
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	handle_hmi_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM hmi_exception
 
@@ -2195,7 +2183,7 @@ EXC_COMMON_BEGIN(h_doorbell_common)
 #else
 	bl	unknown_exception
 #endif
-	b	ret_from_except_lite
+	b	interrupt_return_lite
 
 	GEN_KVM h_doorbell
 
@@ -2225,7 +2213,7 @@ EXC_COMMON_BEGIN(h_virt_irq_common)
 	RUNLATCH_ON
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_IRQ
-	b	ret_from_except_lite
+	b	interrupt_return_lite
 
 	GEN_KVM h_virt_irq
 
@@ -2272,7 +2260,7 @@ EXC_COMMON_BEGIN(performance_monitor_common)
 	RUNLATCH_ON
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	performance_monitor_exception
-	b	ret_from_except_lite
+	b	interrupt_return_lite
 
 	GEN_KVM performance_monitor
 
@@ -2312,23 +2300,21 @@ BEGIN_FTR_SECTION
   END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
 #endif
 	bl	load_up_altivec
-	b	fast_exception_return
+	b	fast_interrupt_return
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	altivec_unavailable_tm
-	b	ret_from_except
+	b	interrupt_return
 #endif
 1:
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	altivec_unavailable_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM altivec_unavailable
 
@@ -2370,20 +2356,18 @@ BEGIN_FTR_SECTION
 	b	load_up_vsx
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	vsx_unavailable_tm
-	b	ret_from_except
+	b	interrupt_return
 #endif
 1:
 END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 #endif
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	vsx_unavailable_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM vsx_unavailable
 
@@ -2410,10 +2394,9 @@ EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20)
 EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20)
 EXC_COMMON_BEGIN(facility_unavailable_common)
 	GEN_COMMON facility_unavailable
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	facility_unavailable_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM facility_unavailable
 
@@ -2440,10 +2423,9 @@ EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20)
 EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20)
 EXC_COMMON_BEGIN(h_facility_unavailable_common)
 	GEN_COMMON h_facility_unavailable
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	facility_unavailable_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM h_facility_unavailable
 
@@ -2474,10 +2456,9 @@ EXC_REAL_END(cbe_system_error, 0x1200, 0x100)
 EXC_VIRT_NONE(0x5200, 0x100)
 EXC_COMMON_BEGIN(cbe_system_error_common)
 	GEN_COMMON cbe_system_error
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	cbe_system_error_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM cbe_system_error
 
@@ -2503,10 +2484,9 @@ EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100)
 EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100)
 EXC_COMMON_BEGIN(instruction_breakpoint_common)
 	GEN_COMMON instruction_breakpoint
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	instruction_breakpoint_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM instruction_breakpoint
 
@@ -2626,10 +2606,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 
 EXC_COMMON_BEGIN(denorm_exception_common)
 	GEN_COMMON denorm_exception
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	unknown_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM denorm_exception
 
@@ -2648,10 +2627,9 @@ EXC_REAL_END(cbe_maintenance, 0x1600, 0x100)
 EXC_VIRT_NONE(0x5600, 0x100)
 EXC_COMMON_BEGIN(cbe_maintenance_common)
 	GEN_COMMON cbe_maintenance
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	cbe_maintenance_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM cbe_maintenance
 
@@ -2676,14 +2654,13 @@ EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100)
 EXC_VIRT_END(altivec_assist, 0x5700, 0x100)
 EXC_COMMON_BEGIN(altivec_assist_common)
 	GEN_COMMON altivec_assist
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_ALTIVEC
 	bl	altivec_assist_exception
 #else
 	bl	unknown_exception
 #endif
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM altivec_assist
 
@@ -2702,10 +2679,9 @@ EXC_REAL_END(cbe_thermal, 0x1800, 0x100)
 EXC_VIRT_NONE(0x5800, 0x100)
 EXC_COMMON_BEGIN(cbe_thermal_common)
 	GEN_COMMON cbe_thermal
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	cbe_thermal_exception
-	b	ret_from_except
+	b	interrupt_return
 
 	GEN_KVM cbe_thermal
 
@@ -2737,7 +2713,6 @@ EXC_COMMON_BEGIN(soft_nmi_common)
 	ld	r1,PACAEMERGSP(r13)
 	subi	r1,r1,INT_FRAME_SIZE
 	__GEN_COMMON_BODY soft_nmi
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	soft_nmi_interrupt
 	/* Clear MSR_RI before setting SRR0 and SRR1. */
@@ -3038,7 +3013,7 @@ do_hash_page:
         cmpdi	r3,0			/* see if __hash_page succeeded */
 
 	/* Success */
-	beq	fast_exc_return_irq	/* Return from exception on success */
+	beq	interrupt_return_lite	/* Return from exception on success */
 
 	/* Error */
 	blt-	13f
@@ -3055,17 +3030,15 @@ handle_page_fault:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_page_fault
 	cmpdi	r3,0
-	beq+	ret_from_except_lite
-	bl	save_nvgprs
+	beq+	interrupt_return_lite
 	mr	r5,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ld	r4,_DAR(r1)
 	bl	bad_page_fault
-	b	ret_from_except
+	b	interrupt_return
 
 /* We have a data breakpoint exception - handle it */
 handle_dabr_fault:
-	bl	save_nvgprs
 	ld      r4,_DAR(r1)
 	ld      r5,_DSISR(r1)
 	addi    r3,r1,STACK_FRAME_OVERHEAD
@@ -3073,21 +3046,20 @@ handle_dabr_fault:
 	/*
 	 * do_break() may have changed the NV GPRS while handling a breakpoint.
 	 * If so, we need to restore them with their updated values. Don't use
-	 * ret_from_except_lite here.
+	 * interrupt_return_lite here.
 	 */
-	b       ret_from_except
+	b       interrupt_return
 
 
 #ifdef CONFIG_PPC_BOOK3S_64
 /* We have a page fault that hash_page could handle but HV refused
  * the PTE insertion
  */
-13:	bl	save_nvgprs
-	mr	r5,r3
+13:	mr	r5,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ld	r4,_DAR(r1)
 	bl	low_hash_fault
-	b	ret_from_except
+	b	interrupt_return
 #endif
 
 /*
@@ -3097,11 +3069,10 @@ handle_dabr_fault:
  * were soft-disabled.  We want to invoke the exception handler for
  * the access, or panic if there isn't a handler.
  */
-77:	bl	save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+77:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r5,SIGSEGV
 	bl	bad_page_fault
-	b	ret_from_except
+	b	interrupt_return
 
 /*
  * When doorbell is triggered from system reset wakeup, the message is
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 24621e7e5033..45c1524b6c9e 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -524,6 +524,7 @@ void giveup_all(struct task_struct *tsk)
 }
 EXPORT_SYMBOL(giveup_all);
 
+#ifdef CONFIG_PPC_BOOK3S_64
 /*
  * The exception exit path calls restore_math() with interrupts hard disabled
  * but the soft irq state not "reconciled". ftrace code that calls
@@ -564,6 +565,7 @@ void notrace restore_math(struct pt_regs *regs)
 
 	regs->msr = msr;
 }
+#endif
 
 static void save_all(struct task_struct *tsk)
 {
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
index 1d2529824588..034b52d3d78c 100644
--- a/arch/powerpc/kernel/syscall_64.c
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -20,7 +20,11 @@ long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8,
 	unsigned long ti_flags;
 	syscall_fn f;
 
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S))
+		BUG_ON(!(regs->msr & MSR_RI));
 	BUG_ON(!(regs->msr & MSR_PR));
+	BUG_ON(!FULL_REGS(regs));
+	BUG_ON(regs->softe != IRQS_ENABLED);
 
 	if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
 			unlikely(regs->msr & MSR_TS_T))
@@ -177,7 +181,7 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3, struct pt_regs *reg
 		trace_hardirqs_off();
 		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
 		local_irq_enable();
-		/* Took an interrupt which may have more exit work to do. */
+		/* Took an interrupt, may have more exit work to do. */
 		goto again;
 	}
 	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
@@ -193,3 +197,154 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3, struct pt_regs *reg
 
 	return ret;
 }
+
+#ifdef CONFIG_PPC_BOOK3S /* BOOK3E not yet using this */
+notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs, unsigned long msr)
+{
+#ifdef CONFIG_PPC_BOOK3E
+	struct thread_struct *ts = &current->thread;
+#endif
+	unsigned long *ti_flagsp = &current_thread_info()->flags;
+	unsigned long ti_flags;
+	unsigned long flags;
+	unsigned long ret = 0;
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S))
+		BUG_ON(!(regs->msr & MSR_RI));
+	BUG_ON(!(regs->msr & MSR_PR));
+	BUG_ON(!FULL_REGS(regs));
+	BUG_ON(regs->softe != IRQS_ENABLED);
+
+	local_irq_save(flags);
+
+again:
+	ti_flags = READ_ONCE(*ti_flagsp);
+	while (unlikely(ti_flags & (_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM))) {
+		local_irq_enable(); /* returning to user: may enable */
+		if (ti_flags & _TIF_NEED_RESCHED) {
+			schedule();
+		} else {
+			if (ti_flags & _TIF_SIGPENDING)
+				ret |= _TIF_RESTOREALL;
+			do_notify_resume(regs, ti_flags);
+		}
+		local_irq_disable();
+		ti_flags = READ_ONCE(*ti_flagsp);
+	}
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S)) {
+		unsigned long mathflags = 0;
+
+		if (IS_ENABLED(CONFIG_PPC_FPU))
+			mathflags |= MSR_FP;
+		if (IS_ENABLED(CONFIG_ALTIVEC))
+			mathflags |= MSR_VEC;
+
+		if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
+						(ti_flags & _TIF_RESTORE_TM))
+			restore_tm_state(regs);
+		else if ((regs->msr & mathflags) != mathflags)
+			restore_math(regs);
+	}
+
+	trace_hardirqs_on();
+	__hard_EE_RI_disable();
+	if (unlikely(lazy_irq_pending())) {
+		__hard_RI_enable();
+		trace_hardirqs_off();
+		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+		local_irq_enable();
+		local_irq_disable();
+		/* Took an interrupt, may have more exit work to do. */
+		goto again;
+	}
+	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+	irq_soft_mask_set(IRQS_ENABLED);
+
+#ifdef CONFIG_PPC_BOOK3E
+	if (unlikely(ts->debug.dbcr0 & DBCR0_IDM)) {
+		/*
+		 * Check to see if the dbcr0 register is set up to debug.
+		 * Use the internal debug mode bit to do this.
+		 */
+		mtmsr(mfmsr() & ~MSR_DE);
+		mtspr(SPRN_DBCR0, ts->debug.dbcr0);
+		mtspr(SPRN_DBSR, -1);
+	}
+#endif
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	local_paca->tm_scratch = regs->msr;
+#endif
+
+	kuap_check_amr();
+
+	account_cpu_user_exit();
+
+	return ret;
+}
+
+void unrecoverable_exception(struct pt_regs *regs);
+void preempt_schedule_irq(void);
+
+notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs, unsigned long msr)
+{
+	unsigned long *ti_flagsp = &current_thread_info()->flags;
+	unsigned long flags;
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S) && unlikely(!(regs->msr & MSR_RI)))
+		unrecoverable_exception(regs);
+	BUG_ON(regs->msr & MSR_PR);
+	BUG_ON(!FULL_REGS(regs));
+
+	local_irq_save(flags);
+
+	if (regs->softe == IRQS_ENABLED) {
+		/* Returning to a kernel context with local irqs enabled. */
+again:
+		if (IS_ENABLED(CONFIG_PREEMPT)) {
+			/* Return to preemptible kernel context */
+			if (unlikely(*ti_flagsp & _TIF_NEED_RESCHED)) {
+				if (preempt_count() == 0)
+					preempt_schedule_irq();
+			}
+		}
+
+		trace_hardirqs_on();
+		__hard_EE_RI_disable();
+		if (unlikely(lazy_irq_pending())) {
+			__hard_RI_enable();
+			trace_hardirqs_off();
+			local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+			local_irq_enable();
+			local_irq_disable();
+			/* Took an interrupt, may have more exit work to do. */
+			goto again;
+		}
+		irq_soft_mask_set(IRQS_ENABLED);
+	} else {
+		/* Returning to a kernel context with local irqs disabled. */
+		trace_hardirqs_on();
+		__hard_EE_RI_disable();
+	}
+
+	if (regs->msr & MSR_EE)
+		local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	local_paca->tm_scratch = regs->msr;
+#endif
+
+	/*
+	 * We don't need to restore AMR on the way back to userspace for KUAP.
+	 * The value of AMR only matters while we're in the kernel.
+	 */
+	kuap_restore_amr(regs);
+
+	if (unlikely(*ti_flagsp & _TIF_EMULATE_STACK_STORE)) {
+		clear_bits(_TIF_EMULATE_STACK_STORE, ti_flagsp);
+		return 1;
+	}
+	return 0;
+}
+#endif
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 8eb867dbad5f..44e7a776e56f 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -131,7 +131,7 @@ _GLOBAL(load_up_vsx)
 	/* enable use of VSX after return */
 	oris	r12,r12,MSR_VSX at h
 	std	r12,_MSR(r1)
-	b	fast_exception_return
+	b	fast_interrupt_return
 
 #endif /* CONFIG_VSX */
 
-- 
2.23.0



More information about the Linuxppc-dev mailing list