[PATCH] KVM: PPC: Book3S HV: Tunable to configure maximum # of vCPUs per VM

[David Gibson]

On Tue, Sep 10, 2019 at 06:49:34PM +0200, Greg Kurz wrote:
> Each vCPU of a VM allocates a XIVE VP in OPAL which is associated with
> 8 event queue (EQ) descriptors, one for each priority. A POWER9 socket
> can handle a maximum of 1M event queues.
> 
> The powernv platform allocates NR_CPUS (== 2048) VPs for the hypervisor,
> and each XIVE KVM device allocates KVM_MAX_VCPUS (== 2048) VPs. This means
> that on a bi-socket system, we can create at most:
> 
> (2 * 1M) / (8 * 2048) - 1 == 127 XIVE or XICS-on-XIVE KVM devices
> 
> ie, start at most 127 VMs benefiting from an in-kernel interrupt controller.
> Subsequent VMs need to rely on much slower userspace emulated XIVE device in
> QEMU.
> 
> This is problematic as one can legitimately expect to start the same
> number of mono-CPU VMs as the number of HW threads available on the
> system (eg, 144 on Witherspoon).
> 
> I'm not aware of any userspace supporting more that 1024 vCPUs. It thus
> seem overkill to consume that many VPs per VM. Ideally we would even
> want userspace to be able to tell KVM about the maximum number of vCPUs
> when creating the VM.
> 
> For now, provide a module parameter to configure the maximum number of
> vCPUs per VM. While here, reduce the default value to 1024 to match the
> current limit in QEMU. This number is only used by the XIVE KVM devices,
> but some more users of KVM_MAX_VCPUS could possibly be converted.
> 
> With this change, I could successfully run 230 mono-CPU VMs on a
> Witherspoon system using the official skiboot-6.3.
> 
> I could even run more VMs by using upstream skiboot containing this
> fix, that allows to better spread interrupts between sockets:
> 
> e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()")
> 
> MAX VPCUS | MAX VMS
> ----------+---------
>      1024 |     255
>       512 |     511
>       256 |    1023 (*)
> 
> (*) the system was barely usable because of the extreme load and
>     memory exhaustion but the VMs did start.

Hrm.  I don't love the idea of using a global tunable for this,
although I guess it could have some use.  It's another global system
property that admins have to worry about.

A better approach would seem to be a way for userspace to be able to
hint the maximum number of cpus for a specific VM to the kernel.

> 
> Signed-off-by: Greg Kurz <groug at kaod.org>
> ---
>  arch/powerpc/include/asm/kvm_host.h   |    1 +
>  arch/powerpc/kvm/book3s_hv.c          |   32 ++++++++++++++++++++++++++++++++
>  arch/powerpc/kvm/book3s_xive.c        |    2 +-
>  arch/powerpc/kvm/book3s_xive_native.c |    2 +-
>  4 files changed, 35 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
> index 6fb5fb4779e0..17582ce38788 100644
> --- a/arch/powerpc/include/asm/kvm_host.h
> +++ b/arch/powerpc/include/asm/kvm_host.h
> @@ -335,6 +335,7 @@ struct kvm_arch {
>  	struct kvm_nested_guest *nested_guests[KVM_MAX_NESTED_GUESTS];
>  	/* This array can grow quite large, keep it at the end */
>  	struct kvmppc_vcore *vcores[KVM_MAX_VCORES];
> +	unsigned int max_vcpus;
>  #endif
>  };
>  
> diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
> index f8975c620f41..393d8a1ce9d8 100644
> --- a/arch/powerpc/kvm/book3s_hv.c
> +++ b/arch/powerpc/kvm/book3s_hv.c
> @@ -125,6 +125,36 @@ static bool nested = true;
>  module_param(nested, bool, S_IRUGO | S_IWUSR);
>  MODULE_PARM_DESC(nested, "Enable nested virtualization (only on POWER9)");
>  
> +#define MIN(x, y) (((x) < (y)) ? (x) : (y))
> +
> +static unsigned int max_vcpus = MIN(KVM_MAX_VCPUS, 1024);
> +
> +static int set_max_vcpus(const char *val, const struct kernel_param *kp)
> +{
> +	unsigned int new_max_vcpus;
> +	int ret;
> +
> +	ret = kstrtouint(val, 0, &new_max_vcpus);
> +	if (ret)
> +		return ret;
> +
> +	if (new_max_vcpus > KVM_MAX_VCPUS)
> +		return -EINVAL;
> +
> +	max_vcpus = new_max_vcpus;
> +
> +	return 0;
> +}
> +
> +static struct kernel_param_ops max_vcpus_ops = {
> +	.set = set_max_vcpus,
> +	.get = param_get_uint,
> +};
> +
> +module_param_cb(max_vcpus, &max_vcpus_ops, &max_vcpus, S_IRUGO | S_IWUSR);
> +MODULE_PARM_DESC(max_vcpus, "Maximum number of vCPUS per VM (max = "
> +		 __stringify(KVM_MAX_VCPUS) ")");
> +
>  static inline bool nesting_enabled(struct kvm *kvm)
>  {
>  	return kvm->arch.nested_enable && kvm_is_radix(kvm);
> @@ -4918,6 +4948,8 @@ static int kvmppc_core_init_vm_hv(struct kvm *kvm)
>  	if (radix_enabled())
>  		kvmhv_radix_debugfs_init(kvm);
>  
> +	kvm->arch.max_vcpus = max_vcpus;
> +
>  	return 0;
>  }
>  
> diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
> index 2ef43d037a4f..0fea31b64564 100644
> --- a/arch/powerpc/kvm/book3s_xive.c
> +++ b/arch/powerpc/kvm/book3s_xive.c
> @@ -2026,7 +2026,7 @@ static int kvmppc_xive_create(struct kvm_device *dev, u32 type)
>  		xive->q_page_order = xive->q_order - PAGE_SHIFT;
>  
>  	/* Allocate a bunch of VPs */
> -	xive->vp_base = xive_native_alloc_vp_block(KVM_MAX_VCPUS);
> +	xive->vp_base = xive_native_alloc_vp_block(kvm->arch.max_vcpus);
>  	pr_devel("VP_Base=%x\n", xive->vp_base);
>  
>  	if (xive->vp_base == XIVE_INVALID_VP)
> diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
> index 84a354b90f60..20314010da56 100644
> --- a/arch/powerpc/kvm/book3s_xive_native.c
> +++ b/arch/powerpc/kvm/book3s_xive_native.c
> @@ -1095,7 +1095,7 @@ static int kvmppc_xive_native_create(struct kvm_device *dev, u32 type)
>  	 * a default. Getting the max number of CPUs the VM was
>  	 * configured with would improve our usage of the XIVE VP space.
>  	 */
> -	xive->vp_base = xive_native_alloc_vp_block(KVM_MAX_VCPUS);
> +	xive->vp_base = xive_native_alloc_vp_block(kvm->arch.max_vcpus);
>  	pr_devel("VP_Base=%x\n", xive->vp_base);
>  
>  	if (xive->vp_base == XIVE_INVALID_VP)
> 

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20190911/5d2adfd9/attachment.sig>