[PATCH 03/11] powerpc/powernv/ioda: set up PE on opencapi device when enabling

[Alastair D'Silva]

On Mon, 2019-09-09 at 17:45 +0200, Frederic Barrat wrote:
> The PE for an opencapi device was set as part of a late PHB fixup
> operation, when creating the PHB. To use the PCI hotplug framework,
> this is not going to work, as the PHB stays the same, it's only the
> devices underneath which are updated. For regular PCI devices, it is
> done as part of the reconfiguration of the bridge, but for opencapi
> PHBs, we don't have an intermediate bridge. So let's define the PE
> when the device is enabled. PEs are meaningless for opencapi, the NPU
> doesn't define them and opal is not doing anything with them.
> 
> Signed-off-by: Frederic Barrat <fbarrat at linux.ibm.com>
> ---
>  arch/powerpc/platforms/powernv/pci-ioda.c | 31 +++++++++++++++++--
> ----
>  1 file changed, 23 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
> b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 3dbbf5365c1c..06ce7ddaa0cf 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1260,8 +1260,6 @@ static void pnv_pci_ioda_setup_PEs(void)
>  {
>  	struct pci_controller *hose;
>  	struct pnv_phb *phb;
> -	struct pci_bus *bus;
> -	struct pci_dev *pdev;
>  	struct pnv_ioda_pe *pe;
>  
>  	list_for_each_entry(hose, &hose_list, list_node) {
> @@ -1273,11 +1271,6 @@ static void pnv_pci_ioda_setup_PEs(void)
>  			if (phb->model == PNV_PHB_MODEL_NPU2)
>  				WARN_ON_ONCE(pnv_npu2_init(hose));
>  		}
> -		if (phb->type == PNV_PHB_NPU_OCAPI) {
> -			bus = hose->bus;
> -			list_for_each_entry(pdev, &bus->devices,
> bus_list)
> -				pnv_ioda_setup_dev_PE(pdev);
> -		}
>  	}
>  	list_for_each_entry(hose, &hose_list, list_node) {
>  		phb = hose->private_data;
> @@ -3385,6 +3378,28 @@ static bool pnv_pci_enable_device_hook(struct
> pci_dev *dev)
>  	return true;
>  }
>  
> +static bool pnv_ocapi_enable_device_hook(struct pci_dev *dev)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(dev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	struct pci_dn *pdn;
> +	struct pnv_ioda_pe *pe;
> +
> +	if (!phb->initialized)
> +		return true;
> +
> +	pdn = pci_get_pdn(dev);
> +	if (!pdn)
> +		return false;
> +
> +	if (pdn->pe_number == IODA_INVALID_PE) {
> +		pe = pnv_ioda_setup_dev_PE(dev);
> +		if (!pe)
> +			return false;
> +	}
> +	return true;
> +}
> +
>  static long pnv_pci_ioda1_unset_window(struct iommu_table_group
> *table_group,
>  				       int num)
>  {
> @@ -3625,7 +3640,7 @@ static const struct pci_controller_ops
> pnv_npu_ioda_controller_ops = {
>  };
>  
>  static const struct pci_controller_ops
> pnv_npu_ocapi_ioda_controller_ops = {
> -	.enable_device_hook	= pnv_pci_enable_device_hook,
> +	.enable_device_hook	= pnv_ocapi_enable_device_hook,
>  	.window_alignment	= pnv_pci_window_alignment,
>  	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
>  	.shutdown		= pnv_pci_ioda_shutdown,

Reviewed-by: Alastair D'Silva <alastair at d-silva.org>

-- 
Alastair D'Silva
Open Source Developer
Linux Technology Centre, IBM Australia
mob: 0423 762 819