[PATCH 01/11] powerpc/powernv/ioda: Fix ref count for devices with their own PE

Alastair D'Silva alastair at au1.ibm.com
Tue Sep 10 10:20:56 AEST 2019


On Mon, 2019-09-09 at 17:45 +0200, Frederic Barrat wrote:
> Taking a reference on the pci_dev structure was required with initial
> commit 184cd4a3b962 ("powerpc/powernv: PCI support for p7IOC under
> OPAL v2"), where we were storing the pci_dev in the pci_dn structure.
> 
> However, the pci_dev was later removed from the pci_dn structure, but
> the reference was kept. See commit 902bdc57451c
> ("powerpc/powernv/idoa:
> Remove unnecessary pcidev from pci_dn").
> 
> The pnv_ioda_pe structure life cycle is the same as the pci_dev
> structure, the PE is freed when the device is released. So we don't
> need a reference for the pci_dev stored in the PE, otherwise the
> pci_dev will never be released. Which is not really a surprise as the
> comment (removed here as no longer needed) was stating as much.
> 
> Fixes: 902bdc57451c ("powerpc/powernv/idoa: Remove unnecessary pcidev
> from pci_dn")
> Signed-off-by: Frederic Barrat <fbarrat at linux.ibm.com>
> ---
>  arch/powerpc/platforms/powernv/pci-ioda.c | 11 +----------
>  1 file changed, 1 insertion(+), 10 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
> b/arch/powerpc/platforms/powernv/pci-ioda.c
> index d8080558d020..92767f006f20 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1062,14 +1062,6 @@ static struct pnv_ioda_pe
> *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
>  		return NULL;
>  	}
>  
> -	/* NOTE: We get only one ref to the pci_dev for the pdn, not
> for the
> -	 * pointer in the PE data structure, both should be destroyed
> at the
> -	 * same time. However, this needs to be looked at more closely
> again
> -	 * once we actually start removing things (Hotplug, SR-IOV,
> ...)
> -	 *
> -	 * At some point we want to remove the PDN completely anyways
> -	 */
> -	pci_dev_get(dev);
>  	pdn->pe_number = pe->pe_number;
>  	pe->flags = PNV_IODA_PE_DEV;
>  	pe->pdev = dev;
> @@ -1084,7 +1076,6 @@ static struct pnv_ioda_pe
> *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
>  		pnv_ioda_free_pe(pe);
>  		pdn->pe_number = IODA_INVALID_PE;
>  		pe->pdev = NULL;
> -		pci_dev_put(dev);
>  		return NULL;
>  	}
>  
> @@ -1228,7 +1219,7 @@ static struct pnv_ioda_pe
> *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
>  			 */
>  			dev_info(&npu_pdev->dev,
>  				"Associating to existing PE %x\n",
> pe_num);
> -			pci_dev_get(npu_pdev);
> +			pci_dev_get(npu_pdev); // still needed after
> 902bdc57451c ?
>  			npu_pdn = pci_get_pdn(npu_pdev);
>  			rid = npu_pdev->bus->number << 8 | npu_pdn-
> >devfn;
>  			npu_pdn->pe_number = pe_num;

Reviewed-by: Alastair D'Silva <alastair at d-silva.org>

-- 
Alastair D'Silva
Open Source Developer
Linux Technology Centre, IBM Australia
mob: 0423 762 819



More information about the Linuxppc-dev mailing list