[PATCH v2 2/2] powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error

Vaibhav Jain vaibhav at linux.ibm.com
Wed Sep 4 16:59:09 AEST 2019


Hi Aneesh,

Thanks for the patch. A minor suggestion below:

"Aneesh Kumar K.V" <aneesh.kumar at linux.ibm.com> writes:

> Right now we force an unbind of SCM memory at drcindex on H_OVERLAP error.
> This really slows down operations like kexec where we get the H_OVERLAP
> error because we don't go through a full hypervisor re init.
>
> H_OVERLAP error for a H_SCM_BIND_MEM hcall indicates that SCM memory at
> drc index is already bound. Since we don't specify a logical memory
> address for bind hcall, we can use the H_SCM_QUERY hcall to query
> the already bound logical address.
>
> Boot time difference with and without patch is:
>
> [    5.583617] IOMMU table initialized, virtual merging enabled
> [    5.603041] papr_scm ibm,persistent-memory:ibm,pmemory at 44104001: Retrying bind after unbinding
> [  301.514221] papr_scm ibm,persistent-memory:ibm,pmemory at 44108001: Retrying bind after unbinding
> [  340.057238] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs
>
> after fix
>
> [    5.101572] IOMMU table initialized, virtual merging enabled
> [    5.116984] papr_scm ibm,persistent-memory:ibm,pmemory at 44104001: Querying SCM details
> [    5.117223] papr_scm ibm,persistent-memory:ibm,pmemory at 44108001: Querying SCM details
> [    5.120530] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar at linux.ibm.com>
> ---
> Changes from V1:
> * Use the first block and last block to query the logical bind memory
> * If we fail to query, ubind and retry the bind.
>
>
>  arch/powerpc/platforms/pseries/papr_scm.c | 48 +++++++++++++++++++----
>  1 file changed, 40 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
> index 3bef4d298ac6..61883291defc 100644
> --- a/arch/powerpc/platforms/pseries/papr_scm.c
> +++ b/arch/powerpc/platforms/pseries/papr_scm.c
> @@ -65,10 +65,8 @@ static int drc_pmem_bind(struct papr_scm_priv *p)
>  		cond_resched();
>  	} while (rc == H_BUSY);
>  
> -	if (rc) {
> -		dev_err(&p->pdev->dev, "bind err: %lld\n", rc);
> +	if (rc)
>  		return rc;
> -	}
>  
>  	p->bound_addr = saved;
>  	dev_dbg(&p->pdev->dev, "bound drc 0x%x to %pR\n", p->drc_index, &p->res);
> @@ -110,6 +108,42 @@ static void drc_pmem_unbind(struct papr_scm_priv *p)
>  	return;
>  }
>  
> +static int drc_pmem_query_n_bind(struct papr_scm_priv *p)
> +{
> +	unsigned long start_addr;
> +	unsigned long end_addr;
> +	unsigned long ret[PLPAR_HCALL_BUFSIZE];
> +	int64_t rc;
> +
> +
> +	rc = plpar_hcall(H_SCM_QUERY_BLOCK_MEM_BINDING, ret,
> +			 p->drc_index, 0);
> +	if (rc)
> +		goto err_out;
> +	start_addr = ret[0];
> +
> +	/* Make sure the full region is bound. */
> +	rc = plpar_hcall(H_SCM_QUERY_BLOCK_MEM_BINDING, ret,
> +			 p->drc_index, p->blocks - 1);
> +	if (rc)
> +		goto err_out;
> +	end_addr = ret[0];
> +
> +	if ((end_addr - start_addr) != ((p->blocks - 1) * p->block_size))
> +		goto err_out;
> +
> +	p->bound_addr = start_addr;
> +	dev_dbg(&p->pdev->dev, "bound drc 0x%x to %pR\n", p->drc_index, &p->res);
> +	return rc;
> +

> +err_out:
> +	dev_info(&p->pdev->dev,
> +		 "Failed to query, trying an unbind followed by bind");
> +	drc_pmem_unbind(p);
> +	return drc_pmem_bind(p);
> +}
Would have preferred error handling for bind failure to be done at
single location i.e in papr_scm_probe() rather than in
drc_pmem_query_n_bind().

> +
> +
>  static int papr_scm_meta_get(struct papr_scm_priv *p,
>  			     struct nd_cmd_get_config_data_hdr *hdr)
>  {
> @@ -430,13 +464,11 @@ static int papr_scm_probe(struct platform_device *pdev)
>  	rc = drc_pmem_bind(p);
>  
>  	/* If phyp says drc memory still bound then force unbound and retry */
> -	if (rc == H_OVERLAP) {
> -		dev_warn(&pdev->dev, "Retrying bind after unbinding\n");
> -		drc_pmem_unbind(p);
> -		rc = drc_pmem_bind(p);
> -	}
> +	if (rc == H_OVERLAP)
> +		rc = drc_pmem_query_n_bind(p);
>  
>  	if (rc != H_SUCCESS) {
> +		dev_err(&p->pdev->dev, "bind err: %d\n", rc);
>  		rc = -ENXIO;
>  		goto err;
>  	}
> -- 
> 2.21.0
>

-- 
Vaibhav Jain <vaibhav at linux.ibm.com>
Linux Technology Center, IBM India Pvt. Ltd.



More information about the Linuxppc-dev mailing list