[PATCH v2 07/23] soc: fsl: qe: merge qe_ic.h into qe_ic.c

Wed Oct 30 21:24:09 AEDT 2019

Le 25/10/2019 à 14:40, Rasmus Villemoes a écrit :
> The local qe_ic.h header is only used by qe_ic.c, so merge its
> contents into the .c file. This is preparation for moving the driver
> to drivers/irqchip/. It also avoids confusion between this header and
> the one at include/soc/fsl/qe/qe_ic.h, which is included from a number
> of places (qe_ic.c among others).
> 
> Signed-off-by: Rasmus Villemoes <linux at rasmusvillemoes.dk>
> ---
>   drivers/soc/fsl/qe/qe_ic.c |  91 ++++++++++++++++++++++++++++++-
>   drivers/soc/fsl/qe/qe_ic.h | 108 -------------------------------------
>   2 files changed, 90 insertions(+), 109 deletions(-)
>   delete mode 100644 drivers/soc/fsl/qe/qe_ic.h
> 
> diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
> index d420492b4c23..7b1870d2866a 100644
> --- a/drivers/soc/fsl/qe/qe_ic.c
> +++ b/drivers/soc/fsl/qe/qe_ic.c
> @@ -26,7 +26,96 @@
>   #include <asm/io.h>
>   #include <soc/fsl/qe/qe_ic.h>
>   
> -#include "qe_ic.h"
> +#define NR_QE_IC_INTS		64
> +
> +/* QE IC registers offset */
> +#define QEIC_CICR		0x00
> +#define QEIC_CIVEC		0x04
> +#define QEIC_CRIPNR		0x08
> +#define QEIC_CIPNR		0x0c
> +#define QEIC_CIPXCC		0x10
> +#define QEIC_CIPYCC		0x14
> +#define QEIC_CIPWCC		0x18
> +#define QEIC_CIPZCC		0x1c
> +#define QEIC_CIMR		0x20
> +#define QEIC_CRIMR		0x24
> +#define QEIC_CICNR		0x28
> +#define QEIC_CIPRTA		0x30
> +#define QEIC_CIPRTB		0x34
> +#define QEIC_CRICR		0x3c
> +#define QEIC_CHIVEC		0x60
> +
> +/* Interrupt priority registers */
> +#define CIPCC_SHIFT_PRI0	29
> +#define CIPCC_SHIFT_PRI1	26
> +#define CIPCC_SHIFT_PRI2	23
> +#define CIPCC_SHIFT_PRI3	20
> +#define CIPCC_SHIFT_PRI4	13
> +#define CIPCC_SHIFT_PRI5	10
> +#define CIPCC_SHIFT_PRI6	7
> +#define CIPCC_SHIFT_PRI7	4

I think you should drop all unused consts and only keep the ones that 
are used.

> +
> +/* CICR priority modes */
> +#define CICR_GWCC		0x00040000
> +#define CICR_GXCC		0x00020000
> +#define CICR_GYCC		0x00010000
> +#define CICR_GZCC		0x00080000
> +#define CICR_GRTA		0x00200000
> +#define CICR_GRTB		0x00400000
> +#define CICR_HPIT_SHIFT		8
> +#define CICR_HPIT_MASK		0x00000300
> +#define CICR_HP_SHIFT		24
> +#define CICR_HP_MASK		0x3f000000
> +
> +/* CICNR */
> +#define CICNR_WCC1T_SHIFT	20
> +#define CICNR_ZCC1T_SHIFT	28
> +#define CICNR_YCC1T_SHIFT	12
> +#define CICNR_XCC1T_SHIFT	4

Same here

> +
> +/* CRICR */
> +#define CRICR_RTA1T_SHIFT	20
> +#define CRICR_RTB1T_SHIFT	28

Same

> +
> +/* Signal indicator */
> +#define SIGNAL_MASK		3
> +#define SIGNAL_HIGH		2
> +#define SIGNAL_LOW		0

Only SIGNAL_HIGH seems to be used.

Christophe

> +
> +struct qe_ic {
> +	/* Control registers offset */
> +	u32 __iomem *regs;
> +
> +	/* The remapper for this QEIC */
> +	struct irq_domain *irqhost;
> +
> +	/* The "linux" controller struct */
> +	struct irq_chip hc_irq;
> +
> +	/* VIRQ numbers of QE high/low irqs */
> +	unsigned int virq_high;
> +	unsigned int virq_low;
> +};
> +
> +/*
> + * QE interrupt controller internal structure
> + */
> +struct qe_ic_info {
> +	/* Location of this source at the QIMR register */
> +	u32	mask;
> +
> +	/* Mask register offset */
> +	u32	mask_reg;
> +
> +	/*
> +	 * For grouped interrupts sources - the interrupt code as
> +	 * appears at the group priority register
> +	 */
> +	u8	pri_code;
> +
> +	/* Group priority register offset */
> +	u32	pri_reg;
> +};
>   
>   static DEFINE_RAW_SPINLOCK(qe_ic_lock);
>   
> diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
> deleted file mode 100644
> index 29b4d768e4a8..000000000000
> --- a/drivers/soc/fsl/qe/qe_ic.h
> +++ /dev/null
> @@ -1,108 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * drivers/soc/fsl/qe/qe_ic.h
> - *
> - * QUICC ENGINE Interrupt Controller Header
> - *
> - * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
> - *
> - * Author: Li Yang <leoli at freescale.com>
> - * Based on code from Shlomi Gridish <gridish at freescale.com>
> - */
> -#ifndef _POWERPC_SYSDEV_QE_IC_H
> -#define _POWERPC_SYSDEV_QE_IC_H
> -
> -#include <soc/fsl/qe/qe_ic.h>
> -
> -#define NR_QE_IC_INTS		64
> -
> -/* QE IC registers offset */
> -#define QEIC_CICR		0x00
> -#define QEIC_CIVEC		0x04
> -#define QEIC_CRIPNR		0x08
> -#define QEIC_CIPNR		0x0c
> -#define QEIC_CIPXCC		0x10
> -#define QEIC_CIPYCC		0x14
> -#define QEIC_CIPWCC		0x18
> -#define QEIC_CIPZCC		0x1c
> -#define QEIC_CIMR		0x20
> -#define QEIC_CRIMR		0x24
> -#define QEIC_CICNR		0x28
> -#define QEIC_CIPRTA		0x30
> -#define QEIC_CIPRTB		0x34
> -#define QEIC_CRICR		0x3c
> -#define QEIC_CHIVEC		0x60
> -
> -/* Interrupt priority registers */
> -#define CIPCC_SHIFT_PRI0	29
> -#define CIPCC_SHIFT_PRI1	26
> -#define CIPCC_SHIFT_PRI2	23
> -#define CIPCC_SHIFT_PRI3	20
> -#define CIPCC_SHIFT_PRI4	13
> -#define CIPCC_SHIFT_PRI5	10
> -#define CIPCC_SHIFT_PRI6	7
> -#define CIPCC_SHIFT_PRI7	4
> -
> -/* CICR priority modes */
> -#define CICR_GWCC		0x00040000
> -#define CICR_GXCC		0x00020000
> -#define CICR_GYCC		0x00010000
> -#define CICR_GZCC		0x00080000
> -#define CICR_GRTA		0x00200000
> -#define CICR_GRTB		0x00400000
> -#define CICR_HPIT_SHIFT		8
> -#define CICR_HPIT_MASK		0x00000300
> -#define CICR_HP_SHIFT		24
> -#define CICR_HP_MASK		0x3f000000
> -
> -/* CICNR */
> -#define CICNR_WCC1T_SHIFT	20
> -#define CICNR_ZCC1T_SHIFT	28
> -#define CICNR_YCC1T_SHIFT	12
> -#define CICNR_XCC1T_SHIFT	4
> -
> -/* CRICR */
> -#define CRICR_RTA1T_SHIFT	20
> -#define CRICR_RTB1T_SHIFT	28
> -
> -/* Signal indicator */
> -#define SIGNAL_MASK		3
> -#define SIGNAL_HIGH		2
> -#define SIGNAL_LOW		0
> -
> -struct qe_ic {
> -	/* Control registers offset */
> -	u32 __iomem *regs;
> -
> -	/* The remapper for this QEIC */
> -	struct irq_domain *irqhost;
> -
> -	/* The "linux" controller struct */
> -	struct irq_chip hc_irq;
> -
> -	/* VIRQ numbers of QE high/low irqs */
> -	unsigned int virq_high;
> -	unsigned int virq_low;
> -};
> -
> -/*
> - * QE interrupt controller internal structure
> - */
> -struct qe_ic_info {
> -	/* Location of this source at the QIMR register */
> -	u32	mask;
> -
> -	/* Mask register offset */
> -	u32	mask_reg;
> -
> -	/*
> -	 * For grouped interrupts sources - the interrupt code as
> -	 * appears at the group priority register
> -	 */
> -	u8	pri_code;
> -
> -	/* Group priority register offset */
> -	u32	pri_reg;
> -};
> -
> -#endif /* _POWERPC_SYSDEV_QE_IC_H */
> 