[PATCH 2/2] ASoC: fsl_asrc: Add support for imx8qm

[Nicolin Chen]

On Wed, Oct 30, 2019 at 03:20:35AM +0000, S.j. Wang wrote:
> Hi
> 
> > 
> > On Tue, Oct 29, 2019 at 05:17:09PM +0800, Shengjiu Wang wrote:
> > > There are two asrc module in imx8qm, each module has different clock
> > > configuration, and the DMA type is EDMA.
> > >
> > > So in this patch, we define the new clocks, refine the clock map, and
> > > include struct fsl_asrc_soc_data for different soc usage.
> > >
> > > The EDMA channel is fixed with each dma request, one dma request
> > > corresponding to one dma channel. So we need to request dma channel
> > > with dma request of asrc module.
> > >
> > > Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> > > ---
> > >  sound/soc/fsl/fsl_asrc.c     | 91 +++++++++++++++++++++++++++++-------
> > >  sound/soc/fsl/fsl_asrc.h     | 65 +++++++++++++++++++++++++-
> > >  sound/soc/fsl/fsl_asrc_dma.c | 39 ++++++++++++----
> > >  3 files changed, 167 insertions(+), 28 deletions(-)
> > 
> > > diff --git a/sound/soc/fsl/fsl_asrc_dma.c
> > > b/sound/soc/fsl/fsl_asrc_dma.c index d6146de9acd2..dbb07a486504
> > 100644
> > > --- a/sound/soc/fsl/fsl_asrc_dma.c
> > > +++ b/sound/soc/fsl/fsl_asrc_dma.c
> > > @@ -199,19 +199,40 @@ static int fsl_asrc_dma_hw_params(struct
> > > snd_soc_component *component,
> > >
> > >       /* Get DMA request of Back-End */
> > >       tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
> > > -     tmp_data = tmp_chan->private;
> > > -     pair->dma_data.dma_request = tmp_data->dma_request;
> > > -     dma_release_channel(tmp_chan);
> > > +     /* tmp_chan may be NULL for it is already allocated by Back-End */
> > > +     if (tmp_chan) {
> > > +             tmp_data = tmp_chan->private;
> > > +             if (tmp_data)
> > > +                     pair->dma_data.dma_request =
> > > + tmp_data->dma_request;
> > 
> > If this patch is supposed to add a !tmp_chan case for EDMA, we probably
> > shouldn't mute the !tmp_data case because dma_request will be NULL,
> > although the code previously didn't have a check either. I mean we might
> > need to error-out for !tmp_chan. Or...
> > is this intentional?
> > 
> 
> Yes, intentional. May be we can change to 
> 
>         if (!asrc_priv->soc->use_edma) {
>                 /* Get DMA request of Back-End */
>                 tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
>                 tmp_data = tmp_chan->private;
>                 pair->dma_data.dma_request = tmp_data->dma_request;
>                 dma_release_channel(tmp_chan);
> 
>                 /* Get DMA request of Front-End */
>                 tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
>                 tmp_data = tmp_chan->private;
>                 pair->dma_data.dma_request2 = tmp_data->dma_request;
>                 pair->dma_data.peripheral_type = tmp_data->peripheral_type;
>                 pair->dma_data.priority = tmp_data->priority;
>                 dma_release_channel(tmp_chan);
>         }

Oh...now I understand..yea, I think this would be better.

Would you please change it in v2?

I am fine with other places, so may add:

Acked-by: Nicolin Chen <nicoleotsuka at gmail.com>

Thanks