loop nesting in alignment exception and machine check

[Christophe Leroy]

Hi,

Le 26/10/2019 à 09:23, Wangshaobo (bobo) a écrit :
> Hi,
> 
> I encountered a problem about a loop nesting occurred in manufacturing 
> the alignment exception in machine check, trigger background is :
> 
> problem:
> 
> machine checkout or critical interrupt ->…->kbox_write[for recording 
> last words] -> memcpy(irremap_addr, src,size):_GLOBAL(memcpy)…
> 
> when we enter memcpy,a command ‘dcbz r11,r6’ will cause a alignment 
> exception, in this situation,r11 loads the ioremap address,which leads 
> to the alignment exception,

You can't use memcpy() on something else than memory.

For an ioremapped area, you have to use memcpy_toio()

Christophe

> 
> then the command can not be process successfully,as we still in machine 
> check.at the end ,it triggers a new irq machine check in irq handler 
> function,a loop nesting begins.
> 
> analysis:
> 
> We have analysed a lot,but it still can not come to a reasonable 
> description,in common,the alignment triggered in machine check context 
> can still be collected into the Kbox
> 
> after alignment exception be handled by handler function, but how does 
> the machine checkout can be triggered in the handler fucntion for any 
> causes? We print relevant registers
> 
> as follow when first enter machine check and alignment exception handler 
> function:
> 
>           MSR:0x2      MSR:0x0
> 
>           SRR1:0x2      SRR1:0x21002
> 
>           But the manual says SRR1 should be set to MSR(0x2),why that 
> happened ?
> 
>           Then a branch in handler function copy the SRR1 to MSR,this 
> enble MSR[ME] and MSR[CE],system collapses.
> 
> Conclusion:
> 
>           1)  why the alignment exception can not be handled in machine 
> check ?
> 
>           2)  besides memcpy,any other function can cause the alignment 
> exception ?
> 
> We still recurrent it, the line as follows:
> 
>           Cpu dead lock->watch log->trigger 
> fiq->kbox_write->memcpy->alignment exception->print last words.
> 
>           but for those problems as below,what the kbox printed is empty.
> 
> ------------------kbox restart:[   10.147594]----------------
> 
> kbox verify fs magic fail
> 
> kbox mem mabye destroyed, format it
> 
> kbox: load OK
> 
> lock-task: major[249] minor[0]
> 
> -----start show_destroyed_kbox_mem_head----
> 
> 00000000: 00000000 00000000 00000000 00000000  ................
> 
> 00000010: 00000000 00000000 00000000 00000000  ................
> 
> 00000020: 00000000 00000000 00000000 00000000  ................
> 
> 00000030: 00000000 00000000 00000000 00000000  ................
> 
> 00000040: 00000000 00000000 00000000 00000000  ................
> 
> 00000050: 00000000 00000000 00000000 00000000  ................
> 
> 00000060: 00000000 00000000 00000000 00000000  ................
> 
> 00000070: 00000000 00000000 00000000 00000000  ................
> 
> 00000080: 00000000 00000000 00000000 00000000  ................
> 
> 00000090: 00000000 00000000 00000000 00000000  ................
>