[PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32

Jason Yan yanaijie at huawei.com
Mon Oct 21 14:34:59 AEDT 2019



On 2019/10/10 2:46, Scott Wood wrote:
> On Wed, 2019-10-09 at 16:41 +0800, Jason Yan wrote:
>> Hi Scott,
>>
>> On 2019/10/9 15:13, Scott Wood wrote:
>>> On Wed, 2019-10-09 at 14:10 +0800, Jason Yan wrote:
>>>> Hi Scott,
>>>>
>>>> Would you please take sometime to test this?
>>>>
>>>> Thank you so much.
>>>>
>>>> On 2019/9/24 13:52, Jason Yan wrote:
>>>>> Hi Scott,
>>>>>
>>>>> Can you test v7 to see if it works to load a kernel at a non-zero
>>>>> address?
>>>>>
>>>>> Thanks,
>>>
>>> Sorry for the delay.  Here's the output:
>>>
>>
>> Thanks for the test.
>>
>>> ## Booting kernel from Legacy Image at 10000000 ...
>>>      Image Name:   Linux-5.4.0-rc2-00050-g8ac2cf5b4
>>>      Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>>>      Data Size:    7521134 Bytes = 7.2 MiB
>>>      Load Address: 04000000
>>>      Entry Point:  04000000
>>>      Verifying Checksum ... OK
>>> ## Flattened Device Tree blob at 1fc00000
>>>      Booting using the fdt blob at 0x1fc00000
>>>      Uncompressing Kernel Image ... OK
>>>      Loading Device Tree to 07fe0000, end 07fff65c ... OK
>>> KASLR: No safe seed for randomizing the kernel base.
>>> OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd
>>> OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr
>>> OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr
>>> Memory CAM mapping: 64/64/64 Mb, residual: 12032Mb
>>
>> When boot from 04000000, the max CAM value is 64M. And
>> you have a board with 12G memory, CONFIG_LOWMEM_CAM_NUM=3 means only
>> 192M memory is mapped and when kernel is randomized at the middle of
>> this 192M memory, we will not have enough continuous memory for node map.
>>
>> Can you set CONFIG_LOWMEM_CAM_NUM=8 and see if it works?
> 
> OK, that worked.
> 

Hi Scott, any more cases should be tested or any more comments?
What else need to be done before this feature can be merged?

Thanks,
Jason

> -Scott
> 
> 
> 
> .
> 



More information about the Linuxppc-dev mailing list