[PATCH v2 23/35] powerpc/64: system call implement the bulk of the logic in C

Michal Suchanek msuchanek at suse.de
Wed Nov 27 07:13:37 AEDT 2019


From: Nicholas Piggin <npiggin at gmail.com>

System call entry and particularly exit code is beyond the limit of what
is reasonable to implement in asm.

This conversion moves all conditional branches out of the asm code,
except for the case that all GPRs should be restored at exit.

Null syscall test is about 5% faster after this patch, because the exit
work is handled under local_irq_disable, and the hard mask and pending
interrupt replay is handled after that, which avoids games with MSR.

Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
[ms: add endian conversion for dtl_idx]
Signed-off-by: Michal Suchanek <msuchanek at suse.de>

v3:
- Fix !KUAP build [mpe]
- Fix BookE build/boot [mpe]
- Don't trace irqs with MSR[RI]=0
- Don't allow syscall_exit_prepare to be ftraced, because function
  graph tracing which traces exits barfs after the IRQ state is
  prepared for kernel exit.
- Fix BE syscall table to use normal function descriptors now that they
  are called from C.
- Comment syscall_exit_prepare.
---
 arch/powerpc/include/asm/asm-prototypes.h     |  11 -
 .../powerpc/include/asm/book3s/64/kup-radix.h |  14 +-
 arch/powerpc/include/asm/cputime.h            |  24 ++
 arch/powerpc/include/asm/hw_irq.h             |   4 +
 arch/powerpc/include/asm/ptrace.h             |   3 +
 arch/powerpc/include/asm/signal.h             |   3 +
 arch/powerpc/include/asm/switch_to.h          |   5 +
 arch/powerpc/include/asm/time.h               |   3 +
 arch/powerpc/kernel/Makefile                  |   3 +-
 arch/powerpc/kernel/entry_64.S                | 337 +++---------------
 arch/powerpc/kernel/signal.h                  |   2 -
 arch/powerpc/kernel/syscall_64.c              | 195 ++++++++++
 arch/powerpc/kernel/systbl.S                  |   9 +-
 13 files changed, 300 insertions(+), 313 deletions(-)
 create mode 100644 arch/powerpc/kernel/syscall_64.c

diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h
index 8561498e653c..399ca63196e4 100644
--- a/arch/powerpc/include/asm/asm-prototypes.h
+++ b/arch/powerpc/include/asm/asm-prototypes.h
@@ -103,14 +103,6 @@ long sys_switch_endian(void);
 notrace unsigned int __check_irq_replay(void);
 void notrace restore_interrupts(void);
 
-/* ptrace */
-long do_syscall_trace_enter(struct pt_regs *regs);
-void do_syscall_trace_leave(struct pt_regs *regs);
-
-/* process */
-void restore_math(struct pt_regs *regs);
-void restore_tm_state(struct pt_regs *regs);
-
 /* prom_init (OpenFirmware) */
 unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 			       unsigned long pp,
@@ -121,9 +113,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 void __init early_setup(unsigned long dt_ptr);
 void early_setup_secondary(void);
 
-/* time */
-void accumulate_stolen_time(void);
-
 /* misc runtime */
 extern u64 __bswapdi2(u64);
 extern s64 __lshrdi3(s64, int);
diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h
index f254de956d6a..07058edc5970 100644
--- a/arch/powerpc/include/asm/book3s/64/kup-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
@@ -3,6 +3,7 @@
 #define _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
 
 #include <linux/const.h>
+#include <asm/reg.h>
 
 #define AMR_KUAP_BLOCK_READ	UL(0x4000000000000000)
 #define AMR_KUAP_BLOCK_WRITE	UL(0x8000000000000000)
@@ -56,7 +57,14 @@
 
 #ifdef CONFIG_PPC_KUAP
 
-#include <asm/reg.h>
+#include <asm/mmu.h>
+#include <asm/ptrace.h>
+
+static inline void kuap_check_amr(void)
+{
+	if (IS_ENABLED(CONFIG_PPC_KUAP_DEBUG) && mmu_has_feature(MMU_FTR_RADIX_KUAP))
+		WARN_ON_ONCE(mfspr(SPRN_AMR) != AMR_KUAP_BLOCKED);
+}
 
 /*
  * We support individually allowing read or write, but we don't support nesting
@@ -101,6 +109,10 @@ static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write)
 		    (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)),
 		    "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read");
 }
+#else /* CONFIG_PPC_KUAP */
+static inline void kuap_check_amr(void)
+{
+}
 #endif /* CONFIG_PPC_KUAP */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index 2431b4ada2fa..c43614cffaac 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -60,6 +60,30 @@ static inline void arch_vtime_task_switch(struct task_struct *prev)
 }
 #endif
 
+static inline void account_cpu_user_entry(void)
+{
+	unsigned long tb = mftb();
+	struct cpu_accounting_data *acct = get_accounting(current);
+
+	acct->utime += (tb - acct->starttime_user);
+	acct->starttime = tb;
+}
+static inline void account_cpu_user_exit(void)
+{
+	unsigned long tb = mftb();
+	struct cpu_accounting_data *acct = get_accounting(current);
+
+	acct->stime += (tb - acct->starttime);
+	acct->starttime_user = tb;
+}
+
 #endif /* __KERNEL__ */
+#else /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
+static inline void account_cpu_user_entry(void)
+{
+}
+static inline void account_cpu_user_exit(void)
+{
+}
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
 #endif /* __POWERPC_CPUTIME_H */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 32a18f2f49bc..7e1c7f5873a8 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -228,9 +228,13 @@ static inline bool arch_irqs_disabled(void)
 #ifdef CONFIG_PPC_BOOK3E
 #define __hard_irq_enable()	asm volatile("wrteei 1" : : : "memory")
 #define __hard_irq_disable()	asm volatile("wrteei 0" : : : "memory")
+#define __hard_EE_RI_disable()	asm volatile("wrteei 0" : : : "memory")
+#define __hard_RI_enable()	do { } while (0)
 #else
 #define __hard_irq_enable()	__mtmsrd(MSR_EE|MSR_RI, 1)
 #define __hard_irq_disable()	__mtmsrd(MSR_RI, 1)
+#define __hard_EE_RI_disable()	__mtmsrd(0, 1)
+#define __hard_RI_enable()	__mtmsrd(MSR_RI, 1)
 #endif
 
 #define hard_irq_disable()	do {					\
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index ee3ada66deb5..082a40153b94 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -138,6 +138,9 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 #define profile_pc(regs) instruction_pointer(regs)
 #endif
 
+long do_syscall_trace_enter(struct pt_regs *regs);
+void do_syscall_trace_leave(struct pt_regs *regs);
+
 #define kernel_stack_pointer(regs) ((regs)->gpr[1])
 static inline int is_syscall_success(struct pt_regs *regs)
 {
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
index 0803ca8b9149..99e1c6de27bc 100644
--- a/arch/powerpc/include/asm/signal.h
+++ b/arch/powerpc/include/asm/signal.h
@@ -6,4 +6,7 @@
 #include <uapi/asm/signal.h>
 #include <uapi/asm/ptrace.h>
 
+struct pt_regs;
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
+
 #endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 5b03d8a82409..476008bc3d08 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -5,6 +5,7 @@
 #ifndef _ASM_POWERPC_SWITCH_TO_H
 #define _ASM_POWERPC_SWITCH_TO_H
 
+#include <linux/sched.h>
 #include <asm/reg.h>
 
 struct thread_struct;
@@ -22,6 +23,10 @@ extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
 extern int emulate_altivec(struct pt_regs *);
 
+void restore_math(struct pt_regs *regs);
+
+void restore_tm_state(struct pt_regs *regs);
+
 extern void flush_all_to_thread(struct task_struct *);
 extern void giveup_all(struct task_struct *);
 
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index e0107495c4de..39ce95016a3a 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -194,5 +194,8 @@ DECLARE_PER_CPU(u64, decrementers_next_tb);
 /* Convert timebase ticks to nanoseconds */
 unsigned long long tb_to_ns(unsigned long long tb_ticks);
 
+/* SPLPAR */
+void accumulate_stolen_time(void);
+
 #endif /* __KERNEL__ */
 #endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index a7ca8fe62368..45f1d5e54671 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -52,7 +52,8 @@ obj-y				:= cputable.o ptrace.o syscalls.o \
 				   of_platform.o prom_parse.o
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
-				   paca.o nvram_64.o firmware.o note.o
+				   paca.o nvram_64.o firmware.o note.o \
+				   syscall_64.o
 obj-$(CONFIG_VDSO32)		+= vdso32/
 obj-$(CONFIG_PPC_WATCHDOG)	+= watchdog.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 5a3e0b5c9ad1..15bc2a872a76 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -63,12 +63,6 @@ exception_marker:
 
 	.globl system_call_common
 system_call_common:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-BEGIN_FTR_SECTION
-	extrdi.	r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
-	bne	.Ltabort_syscall
-END_FTR_SECTION_IFSET(CPU_FTR_TM)
-#endif
 	mr	r10,r1
 	ld	r1,PACAKSAVE(r13)
 	std	r10,0(r1)
@@ -76,350 +70,111 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
 	std	r12,_MSR(r1)
 	std	r0,GPR0(r1)
 	std	r10,GPR1(r1)
+	std	r2,GPR2(r1)
 #ifdef CONFIG_PPC_FSL_BOOK3E
 START_BTB_FLUSH_SECTION
 	BTB_FLUSH(r10)
 END_BTB_FLUSH_SECTION
 #endif
-	ACCOUNT_CPU_USER_ENTRY(r13, r10, r11)
-	std	r2,GPR2(r1)
+	ld	r2,PACATOC(r13)
+	mfcr	r12
+	li	r11,0
+	/* Can we avoid saving r3-r8 in common case? */
 	std	r3,GPR3(r1)
-	mfcr	r2
 	std	r4,GPR4(r1)
 	std	r5,GPR5(r1)
 	std	r6,GPR6(r1)
 	std	r7,GPR7(r1)
 	std	r8,GPR8(r1)
-	li	r11,0
+	/* Zero r9-r12, this should only be required when restoring all GPRs */
 	std	r11,GPR9(r1)
 	std	r11,GPR10(r1)
 	std	r11,GPR11(r1)
 	std	r11,GPR12(r1)
-	std	r11,_XER(r1)
-	std	r11,_CTR(r1)
 	std	r9,GPR13(r1)
 	SAVE_NVGPRS(r1)
+	std	r11,_XER(r1)
+	std	r11,_CTR(r1)
 	mflr	r10
+
 	/*
 	 * This clears CR0.SO (bit 28), which is the error indication on
 	 * return from this system call.
 	 */
-	rldimi	r2,r11,28,(63-28)
+	rldimi	r12,r11,28,(63-28)
 	li	r11,0xc00
 	std	r10,_LINK(r1)
 	std	r11,_TRAP(r1)
+	std	r12,_CCR(r1)
 	std	r3,ORIG_GPR3(r1)
-	std	r2,_CCR(r1)
-	ld	r2,PACATOC(r13)
-	addi	r9,r1,STACK_FRAME_OVERHEAD
+	addi	r10,r1,STACK_FRAME_OVERHEAD
 	ld	r11,exception_marker at toc(r2)
-	std	r11,-16(r9)		/* "regshere" marker */
-
-	kuap_check_amr r10, r11
-
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
-BEGIN_FW_FTR_SECTION
-	/* see if there are any DTL entries to process */
-	ld	r10,PACALPPACAPTR(r13)	/* get ptr to VPA */
-	ld	r11,PACA_DTL_RIDX(r13)	/* get log read index */
-	addi	r10,r10,LPPACA_DTLIDX
-	LDX_BE	r10,0,r10		/* get log write index */
-	cmpd	r11,r10
-	beq+	33f
-	bl	accumulate_stolen_time
-	REST_GPR(0,r1)
-	REST_4GPRS(3,r1)
-	REST_2GPRS(7,r1)
-	addi	r9,r1,STACK_FRAME_OVERHEAD
-33:
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */
-
-	/*
-	 * A syscall should always be called with interrupts enabled
-	 * so we just unconditionally hard-enable here. When some kind
-	 * of irq tracing is used, we additionally check that condition
-	 * is correct
-	 */
-#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
-	lbz	r10,PACAIRQSOFTMASK(r13)
-1:	tdnei	r10,IRQS_ENABLED
-	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
-#endif
-
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	1
-#else
-	li	r11,MSR_RI
-	ori	r11,r11,MSR_EE
-	mtmsrd	r11,1
-#endif /* CONFIG_PPC_BOOK3E */
-
-system_call:			/* label this so stack traces look sane */
-	/* We do need to set SOFTE in the stack frame or the return
-	 * from interrupt will be painful
-	 */
-	li	r10,IRQS_ENABLED
-	std	r10,SOFTE(r1)
+	std	r11,-16(r10)		/* "regshere" marker */
 
-	ld	r11, PACA_THREAD_INFO(r13)
-	ld	r10,TI_FLAGS(r11)
-	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
-	bne	.Lsyscall_dotrace		/* does not return */
-	cmpldi	0,r0,NR_syscalls
-	bge-	.Lsyscall_enosys
+	/* Calling convention has r9 = orig r0, r10 = regs */
+	mr	r9,r0
+	bl	system_call_exception
 
-.Lsyscall:
-/*
- * Need to vector to 32 Bit or default sys_call_table here,
- * based on caller's run-mode / personality.
- */
-	ld	r11,SYS_CALL_TABLE at toc(2)
-	andis.	r10,r10,_TIF_32BIT at h
-	beq	15f
-	ld	r11,COMPAT_SYS_CALL_TABLE at toc(2)
-	clrldi	r3,r3,32
-	clrldi	r4,r4,32
-	clrldi	r5,r5,32
-	clrldi	r6,r6,32
-	clrldi	r7,r7,32
-	clrldi	r8,r8,32
-15:
-	slwi	r0,r0,3
-
-	barrier_nospec_asm
-	/*
-	 * Prevent the load of the handler below (based on the user-passed
-	 * system call number) being speculatively executed until the test
-	 * against NR_syscalls and branch to .Lsyscall_enosys above has
-	 * committed.
-	 */
-
-	ldx	r12,r11,r0	/* Fetch system call handler [ptr] */
-	mtctr   r12
-	bctrl			/* Call handler */
-
-	/* syscall_exit can exit to kernel mode, via ret_from_kernel_thread */
 .Lsyscall_exit:
-	std	r3,RESULT(r1)
+	addi    r4,r1,STACK_FRAME_OVERHEAD
+	bl	syscall_exit_prepare
 
-#ifdef CONFIG_DEBUG_RSEQ
-	/* Check whether the syscall is issued inside a restartable sequence */
-	addi    r3,r1,STACK_FRAME_OVERHEAD
-	bl      rseq_syscall
-	ld	r3,RESULT(r1)
-#endif
-
-	ld	r12, PACA_THREAD_INFO(r13)
-
-	ld	r8,_MSR(r1)
-
-/*
- * This is a few instructions into the actual syscall exit path (which actually
- * starts at .Lsyscall_exit) to cater to kprobe blacklisting and to reduce the
- * number of visible symbols for profiling purposes.
- *
- * We can probe from system_call until this point as MSR_RI is set. But once it
- * is cleared below, we won't be able to take a trap.
- *
- * This is blacklisted from kprobes further below with _ASM_NOKPROBE_SYMBOL().
- */
-system_call_exit:
-	/*
-	 * Disable interrupts so current_thread_info()->flags can't change,
-	 * and so that we don't get interrupted after loading SRR0/1.
-	 *
-	 * Leave MSR_RI enabled for now, because with THREAD_INFO_IN_TASK we
-	 * could fault on the load of the TI_FLAGS below.
-	 */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	0
-#else
-	li	r11,MSR_RI
-	mtmsrd	r11,1
-#endif /* CONFIG_PPC_BOOK3E */
-
-	ld	r9,TI_FLAGS(r12)
-	li	r11,-MAX_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
-	bne-	.Lsyscall_exit_work
+	ld	r2,_CCR(r1)
+	ld	r4,_NIP(r1)
+	ld	r5,_MSR(r1)
+	ld	r6,_LINK(r1)
 
-	andi.	r0,r8,MSR_FP
-	beq 2f
-#ifdef CONFIG_ALTIVEC
-	andis.	r0,r8,MSR_VEC at h
-	bne	3f
-#endif
-2:	addi    r3,r1,STACK_FRAME_OVERHEAD
-	bl	restore_math
-	ld	r8,_MSR(r1)
-	ld	r3,RESULT(r1)
-	li	r11,-MAX_ERRNO
-
-3:	cmpld	r3,r11
-	ld	r5,_CCR(r1)
-	bge-	.Lsyscall_error
-.Lsyscall_error_cont:
-	ld	r7,_NIP(r1)
 BEGIN_FTR_SECTION
 	stdcx.	r0,0,r1			/* to clear the reservation */
 END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
-	andi.	r6,r8,MSR_PR
-	ld	r4,_LINK(r1)
 
-	kuap_check_amr r10, r11
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r5
+	mtlr	r6
 
-#ifdef CONFIG_PPC_BOOK3S
-	/*
-	 * Clear MSR_RI, MSR_EE is already and remains disabled. We could do
-	 * this later, but testing shows that doing it here causes less slow
-	 * down than doing it closer to the rfid.
-	 */
-	li	r11,0
-	mtmsrd	r11,1
-#endif
-
-	beq-	1f
-	ACCOUNT_CPU_USER_EXIT(r13, r11, r12)
+	cmpdi	r3,0
+	bne	syscall_restore_regs
+.Lsyscall_restore_regs_cont:
 
 BEGIN_FTR_SECTION
 	HMT_MEDIUM_LOW
 END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	std	r8, PACATMSCRATCH(r13)
-#endif
-
 	/*
 	 * We don't need to restore AMR on the way back to userspace for KUAP.
 	 * The value of AMR only matters while we're in the kernel.
 	 */
-	ld	r13,GPR13(r1)	/* only restore r13 if returning to usermode */
+	mtcr	r2
 	ld	r2,GPR2(r1)
+	ld	r3,GPR3(r1)
+	ld	r13,GPR13(r1)
 	ld	r1,GPR1(r1)
-	mtlr	r4
-	mtcr	r5
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r8
 	RFI_TO_USER
 	b	.	/* prevent speculative execution */
+_ASM_NOKPROBE_SYMBOL(system_call_common);
 
-1:	/* exit to kernel */
-	kuap_restore_amr r2
-
-	ld	r2,GPR2(r1)
-	ld	r1,GPR1(r1)
-	mtlr	r4
-	mtcr	r5
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r8
-	RFI_TO_KERNEL
-	b	.	/* prevent speculative execution */
-
-.Lsyscall_error:
-	oris	r5,r5,0x1000	/* Set SO bit in CR */
-	neg	r3,r3
-	std	r5,_CCR(r1)
-	b	.Lsyscall_error_cont
-
-/* Traced system call support */
-.Lsyscall_dotrace:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_enter
-
-	/*
-	 * We use the return value of do_syscall_trace_enter() as the syscall
-	 * number. If the syscall was rejected for any reason do_syscall_trace_enter()
-	 * returns an invalid syscall number and the test below against
-	 * NR_syscalls will fail.
-	 */
-	mr	r0,r3
-
-	/* Restore argument registers just clobbered and/or possibly changed. */
-	ld	r3,GPR3(r1)
-	ld	r4,GPR4(r1)
-	ld	r5,GPR5(r1)
-	ld	r6,GPR6(r1)
-	ld	r7,GPR7(r1)
-	ld	r8,GPR8(r1)
-
-	/* Repopulate r9 and r10 for the syscall path */
-	addi	r9,r1,STACK_FRAME_OVERHEAD
-	ld	r10, PACA_THREAD_INFO(r13)
-	ld	r10,TI_FLAGS(r10)
-
-	cmpldi	r0,NR_syscalls
-	blt+	.Lsyscall
-
-	/* Return code is already in r3 thanks to do_syscall_trace_enter() */
-	b	.Lsyscall_exit
-
-
-.Lsyscall_enosys:
-	li	r3,-ENOSYS
-	b	.Lsyscall_exit
-	
-.Lsyscall_exit_work:
-	/* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
-	 If TIF_NOERROR is set, just save r3 as it is. */
-
-	andi.	r0,r9,_TIF_RESTOREALL
-	beq+	0f
+syscall_restore_regs:
+	ld	r3,_CTR(r1)
+	ld	r4,_XER(r1)
 	REST_NVGPRS(r1)
-	b	2f
-0:	cmpld	r3,r11		/* r11 is -MAX_ERRNO */
-	blt+	1f
-	andi.	r0,r9,_TIF_NOERROR
-	bne-	1f
-	ld	r5,_CCR(r1)
-	neg	r3,r3
-	oris	r5,r5,0x1000	/* Set SO bit in CR */
-	std	r5,_CCR(r1)
-1:	std	r3,GPR3(r1)
-2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
-	beq	4f
-
-	/* Clear per-syscall TIF flags if any are set.  */
-
-	li	r11,_TIF_PERSYSCALL_MASK
-	addi	r12,r12,TI_FLAGS
-3:	ldarx	r10,0,r12
-	andc	r10,r10,r11
-	stdcx.	r10,0,r12
-	bne-	3b
-	subi	r12,r12,TI_FLAGS
-
-4:	/* Anything else left to do? */
-BEGIN_FTR_SECTION
-	lis	r3,DEFAULT_PPR at highest	/* Set default PPR */
-	sldi	r3,r3,32	/* bits 11-13 are used for ppr */
-	std	r3,_PPR(r1)
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
-
-	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
-	beq	ret_from_except_lite
-
-	/* Re-enable interrupts */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	1
-#else
-	li	r10,MSR_RI
-	ori	r10,r10,MSR_EE
-	mtmsrd	r10,1
-#endif /* CONFIG_PPC_BOOK3E */
-
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_leave
-	b	ret_from_except
+	mtctr	r3
+	mtspr	SPRN_XER,r4
+	ld	r0,GPR0(r1)
+	REST_8GPRS(4, r1)
+	ld	r12,GPR12(r1)
+	b	.Lsyscall_restore_regs_cont
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-.Ltabort_syscall:
+_GLOBAL(tabort_syscall)
 	/* Firstly we need to enable TM in the kernel */
 	mfmsr	r10
 	li	r9, 1
 	rldimi	r10, r9, MSR_TM_LG, 63-MSR_TM_LG
 	mtmsrd	r10, 0
 
+	ld	r11,_NIP(r13)
+	ld	r12,_MSR(r13)
+
 	/* tabort, this dooms the transaction, nothing else */
 	li	r9, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
 	TABORT(R9)
@@ -438,8 +193,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	RFI_TO_USER
 	b	.	/* prevent speculative execution */
 #endif
-_ASM_NOKPROBE_SYMBOL(system_call_common);
-_ASM_NOKPROBE_SYMBOL(system_call_exit);
 
 _GLOBAL(ret_from_fork)
 	bl	schedule_tail
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 800433685888..d396efca4068 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -10,8 +10,6 @@
 #ifndef _POWERPC_ARCH_SIGNAL_H
 #define _POWERPC_ARCH_SIGNAL_H
 
-extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
-
 extern void __user *get_sigframe(struct ksignal *ksig, unsigned long sp,
 				  size_t frame_size, int is_32);
 
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
new file mode 100644
index 000000000000..ce4e1b5a9c27
--- /dev/null
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -0,0 +1,195 @@
+#include <linux/err.h>
+#include <asm/book3s/64/kup-radix.h>
+#include <asm/cputime.h>
+#include <asm/hw_irq.h>
+#include <asm/kprobes.h>
+#include <asm/paca.h>
+#include <asm/ptrace.h>
+#include <asm/reg.h>
+#include <asm/signal.h>
+#include <asm/switch_to.h>
+#include <asm/syscall.h>
+#include <asm/time.h>
+
+extern void __noreturn tabort_syscall(void);
+
+typedef long (*syscall_fn)(long, long, long, long, long, long);
+
+long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8, unsigned long r0, struct pt_regs *regs)
+{
+	unsigned long ti_flags;
+	syscall_fn f;
+
+	BUG_ON(!(regs->msr & MSR_PR));
+
+	if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
+			unlikely(regs->msr & MSR_TS_T))
+		tabort_syscall();
+
+	account_cpu_user_entry();
+
+#ifdef CONFIG_PPC_SPLPAR
+	if (IS_ENABLED(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) &&
+			firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		struct lppaca *lp = get_lppaca();
+
+		if (unlikely(local_paca->dtl_ridx != be64_to_cpu(lp->dtl_idx)))
+			accumulate_stolen_time();
+	}
+#endif
+
+	kuap_check_amr();
+
+	/*
+	 * A syscall should always be called with interrupts enabled
+	 * so we just unconditionally hard-enable here. When some kind
+	 * of irq tracing is used, we additionally check that condition
+	 * is correct
+	 */
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
+		WARN_ON(irq_soft_mask_return() != IRQS_ENABLED);
+		WARN_ON(local_paca->irq_happened);
+	}
+	/*
+	 * This is not required for the syscall exit path, but makes the
+	 * stack frame look nicer. If this was initialised in the first stack
+	 * frame, or if the unwinder was taught the first stack frame always
+	 * returns to user with IRQS_ENABLED, this store could be avoided!
+	 */
+	regs->softe = IRQS_ENABLED;
+
+	__hard_irq_enable();
+
+	ti_flags = current_thread_info()->flags;
+	if (unlikely(ti_flags & _TIF_SYSCALL_DOTRACE)) {
+		/*
+		 * We use the return value of do_syscall_trace_enter() as the
+		 * syscall number. If the syscall was rejected for any reason
+		 * do_syscall_trace_enter() returns an invalid syscall number
+		 * and the test below against NR_syscalls will fail.
+		 */
+		r0 = do_syscall_trace_enter(regs);
+	}
+
+	if (unlikely(r0 >= NR_syscalls))
+		return -ENOSYS;
+
+	/* May be faster to do array_index_nospec? */
+	barrier_nospec();
+
+	if (unlikely(ti_flags & _TIF_32BIT)) {
+		f = (void *)compat_sys_call_table[r0];
+
+		r3 &= 0x00000000ffffffffULL;
+		r4 &= 0x00000000ffffffffULL;
+		r5 &= 0x00000000ffffffffULL;
+		r6 &= 0x00000000ffffffffULL;
+		r7 &= 0x00000000ffffffffULL;
+		r8 &= 0x00000000ffffffffULL;
+
+	} else {
+		f = (void *)sys_call_table[r0];
+	}
+
+	return f(r3, r4, r5, r6, r7, r8);
+}
+
+/*
+ * This should be called after a syscall returns, with r3 the return value
+ * from the syscall. If this function returns non-zero, the system call
+ * exit assembly should additionally load all GPR registers and CTR and XER
+ * from the interrupt frame.
+ *
+ * The function graph tracer can not trace the return side of this function,
+ * because RI=0 and soft mask state is "unreconciled", so it is marked notrace.
+ */
+notrace unsigned long syscall_exit_prepare(unsigned long r3, struct pt_regs *regs)
+{
+	unsigned long *ti_flagsp = &current_thread_info()->flags;
+	unsigned long ti_flags;
+	unsigned long ret = 0;
+
+	regs->result = r3;
+
+	/* Check whether the syscall is issued inside a restartable sequence */
+	rseq_syscall(regs);
+
+	ti_flags = *ti_flagsp;
+
+	if (unlikely(r3 >= (unsigned long)-MAX_ERRNO)) {
+		if (likely(!(ti_flags & (_TIF_NOERROR | _TIF_RESTOREALL)))) {
+			r3 = -r3;
+			regs->ccr |= 0x10000000; /* Set SO bit in CR */
+		}
+	}
+
+	if (unlikely(ti_flags & _TIF_PERSYSCALL_MASK)) {
+		if (ti_flags & _TIF_RESTOREALL)
+			ret = _TIF_RESTOREALL;
+		else
+			regs->gpr[3] = r3;
+		clear_bits(_TIF_PERSYSCALL_MASK, ti_flagsp);
+	} else {
+		regs->gpr[3] = r3;
+	}
+
+	if (unlikely(ti_flags & _TIF_SYSCALL_DOTRACE))
+		do_syscall_trace_leave(regs);
+
+again:
+	local_irq_disable();
+	ti_flags = READ_ONCE(*ti_flagsp);
+	while (unlikely(ti_flags & _TIF_USER_WORK_MASK)) {
+		local_irq_enable();
+		if (ti_flags & _TIF_NEED_RESCHED) {
+			schedule();
+		} else {
+			/*
+			 * SIGPENDING must restore signal handler function
+			 * argument GPRs, and some non-volatiles (e.g., r1).
+			 * Restore all for now. This could be made lighter.
+			 */
+			if (ti_flags & _TIF_SIGPENDING)
+				ret |= _TIF_RESTOREALL;
+			do_notify_resume(regs, ti_flags);
+		}
+		local_irq_disable();
+		ti_flags = READ_ONCE(*ti_flagsp);
+	}
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S) && IS_ENABLED(CONFIG_PPC_FPU)) {
+		unsigned long mathflags = MSR_FP;
+
+		if (IS_ENABLED(CONFIG_ALTIVEC))
+			mathflags |= MSR_VEC;
+
+		if ((regs->msr & mathflags) != mathflags)
+			restore_math(regs);
+	}
+
+	/* This must be done with RI=1 because tracing may touch vmaps */
+	trace_hardirqs_on();
+
+	/* This pattern matches prep_irq_for_idle */
+	__hard_EE_RI_disable();
+	if (unlikely(lazy_irq_pending())) {
+		__hard_RI_enable();
+		trace_hardirqs_off();
+		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+		local_irq_enable();
+		/* Took an interrupt which may have more exit work to do. */
+		goto again;
+	}
+	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+	irq_soft_mask_set(IRQS_ENABLED);
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	local_paca->tm_scratch = regs->msr;
+#endif
+
+	kuap_check_amr();
+
+	account_cpu_user_exit();
+
+	return ret;
+}
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 5b905a2f4e4d..d34276f3c495 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -16,25 +16,22 @@
 
 #ifdef CONFIG_PPC64
 	.p2align	3
+#define __SYSCALL(nr, entry)	.8byte entry
+#else
+#define __SYSCALL(nr, entry)	.long entry
 #endif
 
 .globl sys_call_table
 sys_call_table:
 #ifdef CONFIG_PPC64
-#define __SYSCALL(nr, entry)	.8byte DOTSYM(entry)
 #include <asm/syscall_table_64.h>
-#undef __SYSCALL
 #else
-#define __SYSCALL(nr, entry)	.long entry
 #include <asm/syscall_table_32.h>
-#undef __SYSCALL
 #endif
 
 #ifdef CONFIG_COMPAT
 .globl compat_sys_call_table
 compat_sys_call_table:
 #define compat_sys_sigsuspend	sys_sigsuspend
-#define __SYSCALL(nr, entry)	.8byte DOTSYM(entry)
 #include <asm/syscall_table_c32.h>
-#undef __SYSCALL
 #endif
-- 
2.23.0



More information about the Linuxppc-dev mailing list