[PATCH kernel] prom_init: Fetch flatten device tree from the system firmware

[Alexey Kardashevskiy]

so, it is sort-of nack from David and sort-of ack from Segher, what
happens now?



On 01/05/2019 13:42, Alexey Kardashevskiy wrote:
> At the moment, on 256CPU + 256 PCI devices guest, it takes the guest
> about 8.5sec to fetch the entire device tree via the client interface
> as the DT is traversed twice - for strings blob and for struct blob.
> Also, "getprop" is quite slow too as SLOF stores properties in a linked
> list.
> 
> However, since [1] SLOF builds flattened device tree (FDT) for another
> purpose. [2] adds a new "fdt-fetch" client interface for the OS to fetch
> the FDT.
> 
> This tries the new method; if not supported, this falls back to
> the old method.
> 
> There is a change in the FDT layout - the old method produced
> (reserved map, strings, structs), the new one receives only strings and
> structs from the firmware and adds the final reserved map to the end,
> so it is (fw reserved map, strings, structs, reserved map).
> This still produces the same unflattened device tree.
> 
> This merges the reserved map from the firmware into the kernel's reserved
> map. At the moment SLOF generates an empty reserved map so this does not
> change the existing behaviour in regard of reservations.
> 
> This supports only v17 onward as only that version provides dt_struct_size
> which works as "fdt-fetch" only produces v17 blobs.
> 
> If "fdt-fetch" is not available, the old method of fetching the DT is used.
> 
> [1] https://git.qemu.org/?p=SLOF.git;a=commitdiff;h=e6fc84652c9c00
> [2] https://git.qemu.org/?p=SLOF.git;a=commit;h=ecda95906930b80
> 
> Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>
> ---
>  arch/powerpc/kernel/prom_init.c | 43 +++++++++++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
> index f33ff4163a51..72e7a602b68e 100644
> --- a/arch/powerpc/kernel/prom_init.c
> +++ b/arch/powerpc/kernel/prom_init.c
> @@ -2457,6 +2457,48 @@ static void __init flatten_device_tree(void)
>  		prom_panic("Can't allocate initial device-tree chunk\n");
>  	mem_end = mem_start + room;
>  
> +	hdr = (void *) mem_start;
> +	if (!call_prom_ret("fdt-fetch", 2, 1, NULL, mem_start,
> +				room - sizeof(mem_reserve_map)) &&
> +			hdr->version >= 17) {
> +		u32 size;
> +		struct mem_map_entry *fwrmap;
> +
> +		/* Fixup the boot cpuid */
> +		hdr->boot_cpuid_phys = cpu_to_be32(prom.cpu);
> +
> +		/*
> +		 * Store the struct and strings addresses, mostly
> +		 * for consistency, only dt_header_start actually matters later.
> +		 */
> +		dt_header_start = mem_start;
> +		dt_string_start = mem_start + be32_to_cpu(hdr->off_dt_strings);
> +		dt_string_end = dt_string_start +
> +			be32_to_cpu(hdr->dt_strings_size);
> +		dt_struct_start = mem_start + be32_to_cpu(hdr->off_dt_struct);
> +		dt_struct_end = dt_struct_start +
> +			be32_to_cpu(hdr->dt_struct_size);
> +
> +		/*
> +		 * Calculate the reserved map location (which we put
> +		 * at the blob end) and update total size.
> +		 */
> +		fwrmap = (void *)(mem_start + be32_to_cpu(hdr->off_mem_rsvmap));
> +		hdr->off_mem_rsvmap = hdr->totalsize;
> +		size = be32_to_cpu(hdr->totalsize);
> +		hdr->totalsize = cpu_to_be32(size + sizeof(mem_reserve_map));
> +
> +		/* Merge reserved map from firmware to ours */
> +		for ( ; fwrmap->size; ++fwrmap)
> +			reserve_mem(be64_to_cpu(fwrmap->base),
> +					be64_to_cpu(fwrmap->size));
> +
> +		rsvmap = (u64 *)(mem_start + size);
> +
> +		prom_debug("Fetched DTB: %d bytes to @%lx\n", size, mem_start);
> +		goto finalize_exit;
> +	}
> +
>  	/* Get root of tree */
>  	root = call_prom("peer", 1, 1, (phandle)0);
>  	if (root == (phandle)0)
> @@ -2504,6 +2546,7 @@ static void __init flatten_device_tree(void)
>  	/* Version 16 is not backward compatible */
>  	hdr->last_comp_version = cpu_to_be32(0x10);
>  
> +finalize_exit:
>  	/* Copy the reserve map in */
>  	memcpy(rsvmap, mem_reserve_map, sizeof(mem_reserve_map));
>  
> 

-- 
Alexey