[PATCH kernel v3 3/3] powerpc/powernv/ioda2: Create bigger default window with 64k IOMMU pages

Alexey Kardashevskiy aik at ozlabs.ru
Thu May 30 17:03:55 AEST 2019


At the moment we create a small window only for 32bit devices, the window
maps 0..2GB of the PCI space only. For other devices we either use
a sketchy bypass or hardware bypass but the former can only work if
the amount of RAM is no bigger than the device's DMA mask and the latter
requires devices to support at least 59bit DMA.

This extends the default DMA window to the maximum size possible to allow
a wider DMA mask than just 32bit. The default window size is now limited
by the the iommu_table::it_map allocation bitmap which is a contiguous
array, 1 bit per an IOMMU page.

This increases the default IOMMU page size from hard coded 4K to
the system page size to allow wider DMA masks.

This increases the level number to not exceed the max order allocation
limit per TCE level. By the same time, this keeps minimal levels number
as 2 in order to save memory.

As the extended window now overlaps the 32bit MMIO region, this adds
an area reservation to iommu_init_table().

After this change the default window size is 0x80000000000==1<<43 so
devices limited to DMA mask smaller than the amount of system RAM can
still use more than just 2GB of memory for DMA.

With the on-demand allocation of indirect TCE table levels enabled and
2 levels, the first TCE level size is just
1<<ceil((log2(0x7ffffffffff+1)-16)/2)=16384 TCEs or 2 system pages.

Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>
---
Changes:
v3:
* fixed tce levels calculation

v2:
* adjusted level number to the max order
---
 arch/powerpc/include/asm/iommu.h          |  8 +++-
 arch/powerpc/kernel/iommu.c               | 58 +++++++++++++++--------
 arch/powerpc/platforms/powernv/pci-ioda.c | 40 +++++++++++++---
 3 files changed, 79 insertions(+), 27 deletions(-)

diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 0ac52392ed99..5ea782e04803 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -124,6 +124,8 @@ struct iommu_table {
 	struct iommu_table_ops *it_ops;
 	struct kref    it_kref;
 	int it_nid;
+	unsigned long it_reserved_start; /* Start of not-DMA-able (MMIO) area */
+	unsigned long it_reserved_end;
 };
 
 #define IOMMU_TABLE_USERSPACE_ENTRY_RO(tbl, entry) \
@@ -162,8 +164,10 @@ extern int iommu_tce_table_put(struct iommu_table *tbl);
 /* Initializes an iommu_table based in values set in the passed-in
  * structure
  */
-extern struct iommu_table *iommu_init_table(struct iommu_table * tbl,
-					    int nid);
+extern struct iommu_table *iommu_init_table_res(struct iommu_table *tbl,
+		int nid, unsigned long res_start, unsigned long res_end);
+#define iommu_init_table(tbl, nid) iommu_init_table_res((tbl), (nid), 0, 0)
+
 #define IOMMU_TABLE_GROUP_MAX_TABLES	2
 
 struct iommu_table_group;
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 33bbd59cff79..209306ce7f4b 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -646,11 +646,43 @@ static void iommu_table_clear(struct iommu_table *tbl)
 #endif
 }
 
+static void iommu_table_reserve_pages(struct iommu_table *tbl)
+{
+	int i;
+
+	/*
+	 * Reserve page 0 so it will not be used for any mappings.
+	 * This avoids buggy drivers that consider page 0 to be invalid
+	 * to crash the machine or even lose data.
+	 */
+	if (tbl->it_offset == 0)
+		set_bit(0, tbl->it_map);
+
+	for (i = tbl->it_reserved_start; i < tbl->it_reserved_end; ++i)
+		set_bit(i, tbl->it_map);
+}
+
+static void iommu_table_release_pages(struct iommu_table *tbl)
+{
+	int i;
+
+	/*
+	 * In case we have reserved the first bit, we should not emit
+	 * the warning below.
+	 */
+	if (tbl->it_offset == 0)
+		clear_bit(0, tbl->it_map);
+
+	for (i = tbl->it_reserved_start; i < tbl->it_reserved_end; ++i)
+		clear_bit(i, tbl->it_map);
+}
+
 /*
  * Build a iommu_table structure.  This contains a bit map which
  * is used to manage allocation of the tce space.
  */
-struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
+struct iommu_table *iommu_init_table_res(struct iommu_table *tbl, int nid,
+		unsigned long res_start, unsigned long res_end)
 {
 	unsigned long sz;
 	static int welcomed = 0;
@@ -669,13 +701,9 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 	tbl->it_map = page_address(page);
 	memset(tbl->it_map, 0, sz);
 
-	/*
-	 * Reserve page 0 so it will not be used for any mappings.
-	 * This avoids buggy drivers that consider page 0 to be invalid
-	 * to crash the machine or even lose data.
-	 */
-	if (tbl->it_offset == 0)
-		set_bit(0, tbl->it_map);
+	tbl->it_reserved_start = res_start;
+	tbl->it_reserved_end = res_end;
+	iommu_table_reserve_pages(tbl);
 
 	/* We only split the IOMMU table if we have 1GB or more of space */
 	if ((tbl->it_size << tbl->it_page_shift) >= (1UL * 1024 * 1024 * 1024))
@@ -727,12 +755,7 @@ static void iommu_table_free(struct kref *kref)
 		return;
 	}
 
-	/*
-	 * In case we have reserved the first bit, we should not emit
-	 * the warning below.
-	 */
-	if (tbl->it_offset == 0)
-		clear_bit(0, tbl->it_map);
+	iommu_table_release_pages(tbl);
 
 	/* verify that table contains no entries */
 	if (!bitmap_empty(tbl->it_map, tbl->it_size))
@@ -1037,8 +1060,7 @@ int iommu_take_ownership(struct iommu_table *tbl)
 	for (i = 0; i < tbl->nr_pools; i++)
 		spin_lock(&tbl->pools[i].lock);
 
-	if (tbl->it_offset == 0)
-		clear_bit(0, tbl->it_map);
+	iommu_table_reserve_pages(tbl);
 
 	if (!bitmap_empty(tbl->it_map, tbl->it_size)) {
 		pr_err("iommu_tce: it_map is not empty");
@@ -1068,9 +1090,7 @@ void iommu_release_ownership(struct iommu_table *tbl)
 
 	memset(tbl->it_map, 0, sz);
 
-	/* Restore bit#0 set by iommu_init_table() */
-	if (tbl->it_offset == 0)
-		set_bit(0, tbl->it_map);
+	iommu_table_release_pages(tbl);
 
 	for (i = 0; i < tbl->nr_pools; i++)
 		spin_unlock(&tbl->pools[i].lock);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 126602b4e399..ce2efdb3900d 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2422,6 +2422,7 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
 {
 	struct iommu_table *tbl = NULL;
 	long rc;
+	unsigned long res_start, res_end;
 
 	/*
 	 * crashkernel= specifies the kdump kernel's maximum memory at
@@ -2435,19 +2436,46 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
 	 * DMA window can be larger than available memory, which will
 	 * cause errors later.
 	 */
-	const u64 window_size = min((u64)pe->table_group.tce32_size, max_memory);
+	const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER - 1);
 
-	rc = pnv_pci_ioda2_create_table(&pe->table_group, 0,
-			IOMMU_PAGE_SHIFT_4K,
-			window_size,
-			POWERNV_IOMMU_DEFAULT_LEVELS, false, &tbl);
+	/*
+	 * We create the default window as big as we can. The constraint is
+	 * the max order of allocation possible. The TCE tableis likely to
+	 * end up being multilevel and with on-demand allocation in place,
+	 * the initial use is not going to be huge as the default window aims
+	 * to support cripplied devices (i.e. not fully 64bit DMAble) only.
+	 */
+	/* iommu_table::it_map uses 1 bit per IOMMU page, hence 8 */
+	const u64 window_size = min((maxblock * 8) << PAGE_SHIFT, max_memory);
+	/* Each TCE level cannot exceed maxblock so go multilevel if needed */
+	unsigned long tces_order = ilog2(window_size >> PAGE_SHIFT);
+	unsigned long tcelevel_order = ilog2(maxblock >> 3);
+	unsigned int levels = tces_order / tcelevel_order;
+
+	if (tces_order % tcelevel_order)
+		levels += 1;
+	/*
+	 * We try to stick to default levels (which is >1 at the moment) in
+	 * order to save memory by relying on on-demain TCE level allocation.
+	 */
+	levels = max_t(unsigned int, levels, POWERNV_IOMMU_DEFAULT_LEVELS);
+
+	rc = pnv_pci_ioda2_create_table(&pe->table_group, 0, PAGE_SHIFT,
+			window_size, levels, false, &tbl);
 	if (rc) {
 		pe_err(pe, "Failed to create 32-bit TCE table, err %ld",
 				rc);
 		return rc;
 	}
 
-	iommu_init_table(tbl, pe->phb->hose->node);
+	/* We use top part of 32bit space for MMIO so exclude it from DMA */
+	res_start = 0;
+	res_end = 0;
+	if (window_size > pe->phb->ioda.m32_pci_base) {
+		res_start = pe->phb->ioda.m32_pci_base >> tbl->it_page_shift;
+		res_end = min(window_size, SZ_4G) >> tbl->it_page_shift;
+	}
+	iommu_init_table_res(tbl, pe->phb->hose->node, res_start, res_end);
 
 	rc = pnv_pci_ioda2_set_window(&pe->table_group, 0, tbl);
 	if (rc) {
-- 
2.17.1



More information about the Linuxppc-dev mailing list