[PATCH 2/3] arm64: dts: ls1028a: Add PCIe controller DT nodes

[Arnd Bergmann]

On Wed, May 15, 2019 at 9:36 AM Xiaowei Bao <xiaowei.bao at nxp.com> wrote:
> Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   52 ++++++++++++++++++++++++
>  1 files changed, 52 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index b045812..50b579b 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -398,6 +398,58 @@
>                         status = "disabled";
>                 };
>
> +               pcie at 3400000 {
> +                       compatible = "fsl,ls1028a-pcie";
> +                       reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
> +                              0x80 0x00000000 0x0 0x00002000>; /* configuration space */
> +                       reg-names = "regs", "config";
> +                       interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
> +                                    <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
> +                       interrupt-names = "pme", "aer";
> +                       #address-cells = <3>;
> +                       #size-cells = <2>;
> +                       device_type = "pci";
> +                       dma-coherent;
> +                       num-lanes = <4>;
> +                       bus-range = <0x0 0xff>;
> +                       ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
> +                                 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */

Are you sure there is no support for 64-bit BARs or prefetchable memory?

Is this a hardware bug, or something that can be fixed in firmware?

       Arnd