[PATCH] powerpc/powernv: Move SCOM access code into powernv platform

[Andrew Donnellan]

The powernv platform is the only one that directly accesses SCOMs. Move the
support code to platforms/powernv, and get rid of the PPC_SCOM Kconfig
option, as SCOM support is always selected when compiling for powernv.

This also means that the Kconfig item for CONFIG_SCOM_DEBUGFS will actually
show up in menuconfig, as previously it was the only labelled option in
sysdev/Kconfig and wasn't actually in a menu.

Signed-off-by: Andrew Donnellan <ajd at linux.ibm.com>
---
 arch/powerpc/include/asm/scom.h                   | 4 ++--
 arch/powerpc/platforms/powernv/Kconfig            | 5 ++++-
 arch/powerpc/platforms/powernv/Makefile           | 2 +-
 arch/powerpc/{sysdev => platforms/powernv}/scom.c | 0
 arch/powerpc/sysdev/Kconfig                       | 7 -------
 arch/powerpc/sysdev/Makefile                      | 2 --
 6 files changed, 7 insertions(+), 13 deletions(-)
 rename arch/powerpc/{sysdev => platforms/powernv}/scom.c (100%)

diff --git a/arch/powerpc/include/asm/scom.h b/arch/powerpc/include/asm/scom.h
index f5cde45b1161..acc6532a9a9e 100644
--- a/arch/powerpc/include/asm/scom.h
+++ b/arch/powerpc/include/asm/scom.h
@@ -23,7 +23,7 @@
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
-#ifdef CONFIG_PPC_SCOM
+#ifdef CONFIG_PPC_POWERNV
 
 /*
  * The SCOM bus is a sideband bus used for accessing various internal
@@ -161,7 +161,7 @@ static inline int scom_write(scom_map_t map, u64 reg, u64 value)
 }
 
 
-#endif /* CONFIG_PPC_SCOM */
+#endif /* CONFIG_PPC_POWERNV */
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_SCOM_H */
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 850eee860cf2..938803eab0ad 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -12,7 +12,6 @@ config PPC_POWERNV
 	select EPAPR_BOOT
 	select PPC_INDIRECT_PIO
 	select PPC_UDBG_16550
-	select PPC_SCOM
 	select ARCH_RANDOM
 	select CPU_FREQ
 	select PPC_DOORBELL
@@ -47,3 +46,7 @@ config PPC_VAS
 	  VAS adapters are found in POWER9 based systems.
 
 	  If unsure, say N.
+
+config SCOM_DEBUGFS
+	bool "Expose SCOM controllers via debugfs"
+	depends on DEBUG_FS
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index da2e99efbd04..4b1644150135 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -4,12 +4,12 @@ obj-y			+= idle.o opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
 obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
 obj-y			+= opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
 obj-y			+= opal-kmsg.o opal-powercap.o opal-psr.o opal-sensor-groups.o
+obj-y			+= opal-xscom.o scom.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
 obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
 obj-$(CONFIG_CXL_BASE)	+= pci-cxl.o
 obj-$(CONFIG_EEH)	+= eeh-powernv.o
-obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
 obj-$(CONFIG_MEMORY_FAILURE)	+= opal-memory-errors.o
 obj-$(CONFIG_OPAL_PRD)	+= opal-prd.o
 obj-$(CONFIG_PERF_EVENTS) += opal-imc.o
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/platforms/powernv/scom.c
similarity index 100%
rename from arch/powerpc/sysdev/scom.c
rename to arch/powerpc/platforms/powernv/scom.c
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index e0dbec780fe9..7808d279ff1d 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -28,13 +28,6 @@ config PPC_MSI_BITMAP
 source "arch/powerpc/sysdev/xics/Kconfig"
 source "arch/powerpc/sysdev/xive/Kconfig"
 
-config PPC_SCOM
-	bool
-
-config SCOM_DEBUGFS
-	bool "Expose SCOM controllers via debugfs"
-	depends on PPC_SCOM && DEBUG_FS
-
 config GE_FPGA
 	bool
 
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index aaf23283ba0c..35d52d1d2fc0 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -51,8 +51,6 @@ ifdef CONFIG_SUSPEND
 obj-$(CONFIG_PPC_BOOK3S_32)	+= 6xx-suspend.o
 endif
 
-obj-$(CONFIG_PPC_SCOM)		+= scom.o
-
 obj-$(CONFIG_PPC_EARLY_DEBUG_MEMCONS)	+= udbg_memcons.o
 
 obj-$(CONFIG_PPC_XICS)		+= xics/
-- 
2.20.1