[PATCH 1/3] ibmvscsi: Wire up host_reset() in the drivers scsi_host_template

[Brian King]

On 5/1/19 7:47 PM, Tyrel Datwyler wrote:
> From: Tyrel Datwyler <tyreld at linux.vnet.ibm.com>
> 
> Wire up the host_reset function in our driver_template to allow a user
> requested adpater reset via the host_reset sysfs attribute.
> 
> Example:
> 
> echo "adapter" > /sys/class/scsi_host/host0/host_reset
> 
> Signed-off-by: Tyrel Datwyler <tyreld at linux.ibm.com>
> ---
>  drivers/scsi/ibmvscsi/ibmvscsi.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
> index 8cec5230fe31..1c37244f16a0 100644
> --- a/drivers/scsi/ibmvscsi/ibmvscsi.c
> +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
> @@ -2050,6 +2050,18 @@ static struct device_attribute ibmvscsi_host_config = {
>  	.show = show_host_config,
>  };
>  
> +static int ibmvscsi_host_reset(struct Scsi_Host *shost, int reset_type)
> +{
> +	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
> +
> +	vio_disable_interrupts(to_vio_dev(hostdata->dev));
> +	dev_info(hostdata->dev, "Initiating adapter reset!\n");
> +	ibmvscsi_reset_host(hostdata);
> +	vio_enable_interrupts(to_vio_dev(hostdata->dev));

Is it necessary to disable / enable interrupts around the call to ibmvscsi_reset_host?
I don't know why we'd need to do that before calling the reset as we have other
cases, like ibmvscsi_timeout where we don't bother doing this. Also, at the end
of the reset we look to be already enabling interrupts.

Thanks,

Brian

-- 
Brian King
Power Linux I/O
IBM Linux Technology Center