[PATCH 1/8] powerpc/64: Adjust order in pcibios_init()

Sam Bobroff sbobroff at linux.ibm.com
Wed Mar 20 13:58:20 AEDT 2019


The pcibios_init() function for 64 bit PowerPC currently calls
pci_bus_add_devices() before pcibios_resource_survey(), which seems
incorrect because it adds devices and attempts to bind their drivers
before allocating their resources (although no problems seem to be
apparent).

So move the call to pci_bus_add_devices() to after
pcibios_resource_survey(), while extracting call to the
pcibios_fixup() hook so that it remains in the same location.

This will also allow the ppc_md.pcibios_bus_add_device() hooks to
perform actions that depend on PCI resources, both during rescanning
(where this is already the case) and at boot time, to support future
work.

Signed-off-by: Sam Bobroff <sbobroff at linux.ibm.com>
---
 arch/powerpc/kernel/pci-common.c |  4 ----
 arch/powerpc/kernel/pci_32.c     |  4 ++++
 arch/powerpc/kernel/pci_64.c     | 12 +++++++++---
 3 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index ff4b7539cbdf..3146eb73e3b3 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1383,10 +1383,6 @@ void __init pcibios_resource_survey(void)
 		pr_debug("PCI: Assigning unassigned resources...\n");
 		pci_assign_unassigned_resources();
 	}
-
-	/* Call machine dependent fixup */
-	if (ppc_md.pcibios_fixup)
-		ppc_md.pcibios_fixup();
 }
 
 /* This is used by the PCI hotplug driver to allocate resource
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index d3f04f2d8249..40aaa1a6e193 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -259,6 +259,10 @@ static int __init pcibios_init(void)
 	/* Call common code to handle resource allocation */
 	pcibios_resource_survey();
 
+	/* Call machine dependent fixup */
+	if (ppc_md.pcibios_fixup)
+		ppc_md.pcibios_fixup();
+
 	/* Call machine dependent post-init code */
 	if (ppc_md.pcibios_after_init)
 		ppc_md.pcibios_after_init();
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 9d8c10d55407..6f16f30031d7 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -58,14 +58,20 @@ static int __init pcibios_init(void)
 	pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
 
 	/* Scan all of the recorded PCI controllers.  */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
 		pcibios_scan_phb(hose);
-		pci_bus_add_devices(hose->bus);
-	}
 
 	/* Call common code to handle resource allocation */
 	pcibios_resource_survey();
 
+	/* Add devices. */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+		pci_bus_add_devices(hose->bus);
+
+	/* Call machine dependent fixup */
+	if (ppc_md.pcibios_fixup)
+		ppc_md.pcibios_fixup();
+
 	printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
 
 	return 0;
-- 
2.19.0.2.gcad72f5712



More information about the Linuxppc-dev mailing list