[PATCH v2 03/10] powerpc/6xx: Store PGDIR physical address in a SPRG

Christophe Leroy christophe.leroy at c-s.fr
Fri Mar 8 05:14:09 AEDT 2019


Hi,

On 03/07/2019 02:11 PM, Guenter Roeck wrote:
> Hi,
> 
> On Thu, Feb 21, 2019 at 10:37:55AM +0000, Christophe Leroy wrote:
>> Use SPRN_SPRG2 to store the current thread PGDIR and
>> avoid reading thread_struct.pgdir at every TLB miss.
>>
> This patch causes a number of silent (no crash) qemu boot stalls
> in -next. See
> https://kerneltests.org/builders/qemu-ppc-next/builds/1080/steps/qemubuildcommand/logs/stdio
> for an example.

Oops.
Could you try the fix below ?

diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S 
b/arch/powerpc/kernel/cpu_setup_6xx.S
index 6f1c11e0691f..7534ecff5e92 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -24,9 +24,6 @@ BEGIN_MMU_FTR_SECTION
  	li	r10,0
  	mtspr	SPRN_SPRG_603_LRU,r10		/* init SW LRU tracking */
  END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
-	lis	r10, (swapper_pg_dir - PAGE_OFFSET)@h
-	ori	r10, r10, (swapper_pg_dir - PAGE_OFFSET)@l
-	mtspr	SPRN_SPRG_PGDIR, r10

  BEGIN_FTR_SECTION
  	bl	__init_fpu_registers
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index ce6a972f2584..48051c8977c5 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -855,6 +855,9 @@ __secondary_start:
  	li	r3,0
  	stw	r3, RTAS_SP(r4)		/* 0 => not in RTAS */
  #endif
+	lis	r4, (swapper_pg_dir - PAGE_OFFSET)@h
+	ori	r4, r4, (swapper_pg_dir - PAGE_OFFSET)@l
+	mtspr	SPRN_SPRG_PGDIR, r4

  	/* enable MMU and jump to start_secondary */
  	li	r4,MSR_KERNEL
@@ -942,6 +945,9 @@ start_here:
  	li	r3,0
  	stw	r3, RTAS_SP(r4)		/* 0 => not in RTAS */
  #endif
+	lis	r4, (swapper_pg_dir - PAGE_OFFSET)@h
+	ori	r4, r4, (swapper_pg_dir - PAGE_OFFSET)@l
+	mtspr	SPRN_SPRG_PGDIR, r4

  	/* stack */
  	lis	r1,init_thread_union at ha
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 1f13494efb2b..587e4550d83e 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -70,12 +70,12 @@ _GLOBAL(hash_page)
  	lis	r0,KERNELBASE at h		/* check if kernel address */
  	cmplw	0,r4,r0
  	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
-	mfspr	r5, SPRN_SPRG_PGDIR	/* virt page-table root */
+	mfspr	r5, SPRN_SPRG_PGDIR	/* phys page-table root */
  	blt+	112f			/* assume user more likely */
-	lis	r5,swapper_pg_dir at ha	/* if kernel address, use */
-	addi	r5,r5,swapper_pg_dir at l	/* kernel page table */
+	lis	r5, (swapper_pg_dir - PAGE_OFFSET)@ha	/* if kernel address, use */
+	addi	r5 ,r5 , (swapper_pg_dir - PAGE_OFFSET)@l	/* kernel page table */
  	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
-112:	tophys(r5, r5)
+112:
  #ifndef CONFIG_PTE_64BIT
  	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
  	lwz	r8,0(r5)		/* get pmd entry */


Thanks
Christophe

> 
> Unfortunately, it is not possible to revert the patch due to subsequent
> patches, so I was unable to test a revert.
> 
> Bisect log is attached.
> 
> Guenter
> 
> ---
> # bad: [cf08baa29613dd899954089e7cc7dba1d478b365] Add linux-next specific files for 20190306
> # good: [1c163f4c7b3f621efff9b28a47abb36f7378d783] Linux 5.0
> git bisect start 'HEAD' 'v5.0'
> # bad: [6cc8f3499ec8d31904ab9083980a91736512cb37] Merge remote-tracking branch 'vfs/for-next'
> git bisect bad 6cc8f3499ec8d31904ab9083980a91736512cb37
> # good: [63bdf4284c38a48af21745ceb148a087b190cd21] Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
> git bisect good 63bdf4284c38a48af21745ceb148a087b190cd21
> # good: [520b5fc601ab760fee7ea0c403b42d04e8ebfd93] Merge remote-tracking branch 'arm-soc/for-next'
> git bisect good 520b5fc601ab760fee7ea0c403b42d04e8ebfd93
> # bad: [d7f54e4e0d4e90f5df78da8d6a830bafad3b535a] Merge remote-tracking branch 'xtensa/xtensa-for-next'
> git bisect bad d7f54e4e0d4e90f5df78da8d6a830bafad3b535a
> # good: [0c1a78523542fb3d2e6c5ac7955c8ca8f6482e6f] Merge remote-tracking branch 'clk/clk-next'
> git bisect good 0c1a78523542fb3d2e6c5ac7955c8ca8f6482e6f
> # bad: [fb0b0a73b223fc113e961b1d921322844e9c30d9] powerpc: Enable kcov
> git bisect bad fb0b0a73b223fc113e961b1d921322844e9c30d9
> # good: [d0055df0c9c1471c389197a69f43e300185a75aa] Merge branch 'topic/dma' into next
> git bisect good d0055df0c9c1471c389197a69f43e300185a75aa
> # good: [0df977eafc792a5365a7f81d8d5920132e03afad] powerpc/6xx: Don't use SPRN_SPRG2 for storing stack pointer while in RTAS
> git bisect good 0df977eafc792a5365a7f81d8d5920132e03afad
> # bad: [665bed2386e5dc29844ad78c7ef1464664b103ec] powerpc/8xx: replace most #ifdef by IS_ENABLED() in 8xx_mmu.c
> git bisect bad 665bed2386e5dc29844ad78c7ef1464664b103ec
> # bad: [78ca1108b10927b3d068c8da91352b0f4cd01fc5] powerpc/book3s32: Reorder _PAGE_XXX flags to simplify TLB handling
> git bisect bad 78ca1108b10927b3d068c8da91352b0f4cd01fc5
> # bad: [a8a121995b2e4f227fddc534c6bd5f1c02cbe2ee] powerpc/603: Don't handle kernel page TLB misses when not need
> git bisect bad a8a121995b2e4f227fddc534c6bd5f1c02cbe2ee
> # bad: [2c12393f577396a51b7e0537bd3eb29dcc26dc1b] powerpc/603: use physical address directly in TLB miss handlers.
> git bisect bad 2c12393f577396a51b7e0537bd3eb29dcc26dc1b
> # bad: [93c4a162b014d238a287f8264adb25c009c79e61] powerpc/6xx: Store PGDIR physical address in a SPRG
> git bisect bad 93c4a162b014d238a287f8264adb25c009c79e61
> # first bad commit: [93c4a162b014d238a287f8264adb25c009c79e61] powerpc/6xx: Store PGDIR physical address in a SPRG
> 


More information about the Linuxppc-dev mailing list