Bisected regression in v5.1 on PowerBook G3 (Wallstreet)

Finn Thain fthain at telegraphics.com.au
Wed Jun 26 12:06:14 AEST 2019


Hi Christophe,

I received a report of a regression between v5.0 and v5.1 which causes the 
current release to crash during boot with a machine check exception. 
Please see console log below.

Stan (whom I've Cc'd) tells me that this happens on every attempt to boot. 
I asked him to try 'git bisect'. The results are given below. Can you see 
anything in commit 93c4a162b014 that might explain this?

I can also provide the .config if it would help.


$ cat bisect.log
5.0.0-pmac-ide-03515-g3478588b5136 #2 worked
5.0.0-pmac-ide-05504-gda2577fe63f8 #3 worked
5.0.0-pmac-ide-06224-g67e79a6dc266 #4 worked
5.0.0-pmac-ide-06622-g1fc1cd8399ab #5 worked
5.0.0-rc2-pmac-ide-00215=g9580b71b5a78 #6 failed
5.0.0-rc2-pmac-ide-00113-gfe1ef6bcdb4f #7 worked
5.0.0-rc2-pmac-ide-00164-gd5f17ee96447 #8 failed
5.0.0-rc2-pmac-ide-00138-g84de6ab0e904 #9 failed
5.0.0-rc2-pmac-ide-00125-ge995265252fa #10 worked
5.0.0-rc2-pmac-ide-00131-g93c4a162b014 #11 failed
5.0.0-rc2-pmac-ide-00128-g36da5ff0bea2 #12 worked


93c4a162b014d238a287f8264adb25c009c79e61 is the first bad commit
commit 93c4a162b014d238a287f8264adb25c009c79e61
Author: Christophe Leroy <christophe.leroy at c-s.fr>
Date:   Thu Feb 21 10:37:55 2019 +0000

    powerpc/6xx: Store PGDIR physical address in a SPRG

    Use SPRN_SPRG2 to store the current thread PGDIR and
    avoid reading thread_struct.pgdir at every TLB miss.

    Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
    Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>

:040000 040000 dcd7171dff5ba5bf895e4399d9d859c91c5a8293
c51e7def7720499289420ace421cf755bf3bf37e M      arch


[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] Total memory = 512MB; using 1024kB for hash table (at (ptrval))
[    0.000000] Linux version 5.1.0-pmac-ide (fthain at nippy) (gcc version 4.6.4 (btc)) #1 SMP Sun Jun 23 14:46:26 AEST 2019
[    0.000000] Found a Gatwick mac-io controller, rev: 0, mapped at 0x(ptrval)
[    0.000000] Found a Heathrow mac-io controller, rev: 0, mapped at 0x(ptrval)
[    0.000000] PowerMac motherboard: PowerBook Wallstreet
[    0.000000] PMU driver v2 initialized for PowerBook G3 Series, firmware: 0a
[    0.000000] Using PowerMac machine description
[    0.000000] printk: bootconsole [udbg0] enabled
[    0.000000] CPU maps initialized for 1 thread per core
[    0.000000]  (thread shift is 0)
[    0.000000] -----------------------------------------------------
[    0.000000] Hash_size         = 0x100000
[    0.000000] phys_mem_size     = 0x20000000
[    0.000000] dcache_bsize      = 0x20
[    0.000000] icache_bsize      = 0x20
[    0.000000] cpu_features      = 0x000000000501a008
[    0.000000]   possible        = 0x000000002f7ff14b
[    0.000000]   always          = 0x0000000001000000
[    0.000000] cpu_user_features = 0x8c000001 0x00000000
[    0.000000] mmu_features      = 0x00000001
[    0.000000] Hash              = 0x(ptrval)
[    0.000000] Hash_mask         = 0x3fff
[    0.000000] -----------------------------------------------------
[    0.000000] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0
[    0.000000] PCI host bridge /pci (primary) ranges:
[    0.000000]   IO 0x00000000fe000000..0x00000000fe7fffff -> 0x0000000000000000
[    0.000000]  MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000 
[    0.000000]  MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000 
[    0.000000] nvram: OF partition at 0x1800
[    0.000000] nvram: XP partition at 0x1300
[    0.000000] nvram: NR partition at 0x1400
[    0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
[    0.000000] Memory hole size: 0MB
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000] On node 0 totalpages: 131072
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] percpu: Embedded 14 pages/cpu s24972 r8192 d24180 u57344
[    0.000000] pcpu-alloc: s24972 r8192 d24180 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: root=/dev/hda11 video=atyfb:vmode:14,cmode:32 ignore_loglevel printk.time console=ttyS0,9600n8 console=tty
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 503332K/524288K available (5468K kernel code, 272K rwdata, 1364K rodata, 264K init, 182K bss, 20956K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Kernel virtual memory layout:
[    0.000000]   * 0xfffbf000..0xfffff000  : fixmap
[    0.000000]   * 0xff800000..0xffc00000  : highmem PTEs
[    0.000000]   * 0xfeefb000..0xff800000  : early ioremap
[    0.000000]   * 0xe1000000..0xfeefb000  : vmalloc & ioremap
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[    0.000000] irq: Found primary Apple PIC /pci/mac-io for 64 irqs
[    0.000000] irq: Found slave Apple PIC /pci/mac-io for 64 irqs cascade: 27
[    0.000000] irq: System has 128 possible interrupts
[    0.000000] GMT Delta read from XPRAM: -360 minutes, DST: on
[    0.000000] time_init: decrementer frequency = 16.671483 MHz
[    0.000000] time_init: processor frequency   = 264.000000 MHz
[    0.000064] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x3d84ef27e, max_idle_ns: 440795202259 ns
[    0.000100] clocksource: timebase mult[3bfb9003] shift[24] registered
[    0.000195] clockevent: decrementer mult[4449512] shift[32] cpu[0]
[    0.001150] Console: colour dummy device 80x25
[    0.001193] printk: console [tty0] enabled
[    0.001239] printk: bootconsole [udbg0] disabled
[    0.001625] pmac_zilog: serial modem detected
[    4.977278] printk: console [ttyS0] enabled
[    5.027516] pid_max: default: 32768 minimum: 301
[    5.083376] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    5.162419] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    5.248523] *** VALIDATE proc ***
[    5.287109] *** VALIDATE cgroup1 ***
[    5.329716] *** VALIDATE cgroup2 ***
[    5.375172] rcu: Hierarchical SRCU implementation.
[    5.431972] smp: Bringing up secondary CPUs ...
[    5.484998] smp: Brought up 1 node, 1 CPU
[    5.533075] Using standard scheduler topology
[    5.586632] devtmpfs: initialized
[    5.625731] Duplicate name in PowerPC,750, renamed to "l2-cache#1"
[    5.702735] Duplicate name in pci, renamed to "mac-io#1"
[    5.766262] Duplicate name in pci, renamed to "pccard#1"
[    5.830071] random: get_random_u32 called from bucket_table_alloc+0x94/0x1c4 with crng_init=0
[    5.932144] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    6.049531] futex hash table entries: 512 (order: 2, 16384 bytes)
[    6.123224] NET: Registered protocol family 16
[    6.181111] PMU i2c /pci/mac-io/via-pmu
[    6.226470]  channel 1 bus <multibus>
[    6.269024]  channel 2 bus <multibus>
[    6.315157] PCI: Probing PCI hardware
[    6.358004] PCI host bridge to bus 0000:00
[    6.406370] pci_bus 0000:00: root bus resource [io  0x0000-0x7fffff]
[    6.482602] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff])
[    6.604898] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffff]
[    6.687515] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.753382] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[    6.833106] pci 0000:00:00.0: [1057:0002] type 00 class 0x060000
[    6.906583] pci 0000:00:0d.0: [106b:0017] type 00 class 0xff0000
[    6.977163] pci 0000:00:0d.0: reg 0x10: [mem 0xf4000000-0xf407ffff]
[    7.053429] pci 0000:00:10.0: [106b:0017] type 00 class 0xff0000
[    7.124631] pci 0000:00:10.0: reg 0x10: [mem 0xf3000000-0xf307ffff]
[    7.200827] pci 0000:00:11.0: [1002:4c50] type 00 class 0x038000
[    7.272082] pci 0000:00:11.0: reg 0x10: [mem 0x82000000-0x82ffffff]
[    7.347336] pci 0000:00:11.0: reg 0x14: [io  0x0400-0x04ff]
[    7.414246] pci 0000:00:11.0: reg 0x18: [mem 0x82fff000-0x82ffffff]
[    7.489567] pci 0000:00:11.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref]
[    7.570113] pci 0000:00:11.0: supports D1 D2
[    7.622206] pci 0000:00:13.0: [104c:ac15] type 02 class 0x060700
[    7.693527] pci 0000:00:13.0: reg 0x10: [mem 0x81803000-0x81803fff]
[    7.769592] pci 0000:00:13.1: [104c:ac15] type 02 class 0x060700
[    7.841140] pci 0000:00:13.1: reg 0x10: [mem 0x81802000-0x81802fff]
[    7.918261] pci_bus 0000:01: extended config space not accessible
[    7.990055] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04
[    8.069175] pci_bus 0000:05: extended config space not accessible
[    8.142536] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08
[    8.221620] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 08
[    8.301308] PCI: Cannot allocate resource region 2 of device 0000:00:11.0, will remap
[    8.395264] PCI 0000:00 Cannot reserve Legacy IO [io  0x0000-0x0fff]
[    8.471672] pci 0000:00:13.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]
[    8.558317] pci 0000:00:13.0: BAR 10: assigned [mem 0x88000000-0x8bffffff]
[    8.640898] pci 0000:00:13.1: BAR 9: assigned [mem 0x8c000000-0x8fffffff pref]
[    8.727690] pci 0000:00:13.1: BAR 10: assigned [mem 0x90000000-0x93ffffff]
[    8.810457] pci 0000:00:11.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref]
[    8.897101] pci 0000:00:11.0: BAR 2: assigned [mem 0xfd020000-0xfd020fff]
[    8.978667] pci 0000:00:13.0: BAR 7: assigned [io  0x1000-0x10ff]
[    9.051864] pci 0000:00:13.0: BAR 8: assigned [io  0x1100-0x11ff]
[    9.125064] pci 0000:00:13.1: BAR 7: assigned [io  0x1200-0x12ff]
[    9.198269] pci 0000:00:13.1: BAR 8: assigned [io  0x1300-0x13ff]
[    9.271483] pci 0000:00:13.0: CardBus bridge to [bus 01-04]
[    9.338395] pci 0000:00:13.0:   bridge window [io  0x1000-0x10ff]
[    9.411598] pci 0000:00:13.0:   bridge window [io  0x1100-0x11ff]
[    9.484802] pci 0000:00:13.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    9.571597] pci 0000:00:13.0:   bridge window [mem 0x88000000-0x8bffffff]
[    9.653165] pci 0000:00:13.1: CardBus bridge to [bus 05-08]
[    9.720086] pci 0000:00:13.1:   bridge window [io  0x1200-0x12ff]
[    9.793366] pci 0000:00:13.1:   bridge window [io  0x1300-0x13ff]
[    9.866498] pci 0000:00:13.1:   bridge window [mem 0x8c000000-0x8fffffff pref]
[    9.953294] pci 0000:00:13.1:   bridge window [mem 0x90000000-0x93ffffff]
[   10.034865] pci_bus 0000:00: resource 4 [io  0x0000-0x7fffff]
[   10.103874] pci_bus 0000:00: resource 5 [mem 0xfd000000-0xfdffffff]
[   10.179168] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffff]
[   10.254461] pci_bus 0000:01: resource 0 [io  0x1000-0x10ff]
[   10.321391] pci_bus 0000:01: resource 1 [io  0x1100-0x11ff]
[   10.388316] pci_bus 0000:01: resource 2 [mem 0x84000000-0x87ffffff pref]
[   10.468841] pci_bus 0000:01: resource 3 [mem 0x88000000-0x8bffffff]
[   10.544134] pci_bus 0000:05: resource 0 [io  0x1200-0x12ff]
[   10.611058] pci_bus 0000:05: resource 1 [io  0x1300-0x13ff]
[   10.677989] pci_bus 0000:05: resource 2 [mem 0x8c000000-0x8fffffff pref]
[   10.758507] pci_bus 0000:05: resource 3 [mem 0x90000000-0x93ffffff]
[   10.898594] vgaarb: loaded
[   10.931312] SCSI subsystem initialized
[   10.975369] usbcore: registered new interface driver usbfs
[   11.040901] usbcore: registered new interface driver hub
[   11.104378] usbcore: registered new device driver usb
[   11.170053] clocksource: Switched to clocksource timebase
[   11.276916] NET: Registered protocol family 2
[   11.330625] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[   11.420991] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[   11.505653] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[   11.583095] TCP: Hash tables configured (established 4096 bind 4096)
[   11.659434] UDP hash table entries: 256 (order: 1, 8192 bytes)
[   11.729313] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[   11.805155] NET: Registered protocol family 1
[   11.857851] RPC: Registered named UNIX socket transport module.
[   11.927797] RPC: Registered udp transport module.
[   11.984240] RPC: Registered tcp transport module.
[   12.040709] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.118278] PCI: CLS 32 bytes, default 32
[   12.167681] Thermal assist unit 
[   12.167688] using timers, 
[   12.204947] shrink_timer: 200 jiffies
[   12.285360] Initialise system trusted keyrings
[   12.338272] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[   12.415177] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   24.651142] Key type asymmetric registered
[   24.698347] Asymmetric key parser 'x509' registered
[   24.757356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   24.845895] io scheduler mq-deadline registered
[   24.900069] io scheduler kyber registered
[   24.949721] atyfb 0000:00:11.0: enabling device (0086 -> 0087)
[   25.018669] atyfb: using auxiliary register aperture
[   25.078882] atyfb: 3D RAGE LT PRO (Mach64 LP, PCI) [0x4c50 rev 0xdc]
[   25.154242] atyfb: 4M SGRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK
[   25.311727] Console: switching to colour frame buffer device 128x48
[   25.393746] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[   25.465544] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh at kernel.crashing.org>)
[   25.553288] Non-volatile memory driver v1.3
[   25.611564] brd: module loaded
[   25.669889] loop: module loaded
[   25.706428] MacIO PCI driver attached to Gatwick chipset
[   25.769945] MacIO PCI driver attached to Heathrow chipset
[   25.842400] swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay
[   25.932618] 0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port
[   26.058459] 0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port
[   26.186786] macio: fixed media-bay irq on gatwick
[   26.242712] macio: fixed left floppy irqs
[   26.290523] swim3 1.00015000:floppy: [fd1] Couldn't request interrupt
[   26.367458] swim3: probe of 1.00015000:floppy failed with error -16
[   26.442501] macio: fixed left ide irqs
[   26.487653] macio: fixed SCC irqs on gatwick
[   26.539043] 1.00013020:ch-a: ttyS2 at MMIO 0xf4013020 (irq = 79, base_baud = 230400) is a Z85c30 ESCC - Internal modem
[   26.668762] mediabay0: Registered Heathrow media-bay
[   26.939422] mediabay1: Registered Heathrow media-bay
[   26.997073] mediabay0: Bay contains an ATA device
[   27.210473] PMU Backlight initialized (pmubl)
[   27.262723] Uniform Multi-Platform E-IDE driver
[   28.368835] ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 0, irq 30
[   28.463347] Probing IDE interface ide0...
[   28.869051] hda: SAMSUNG HM100JC, ATA DISK drive
[   29.453887] random: fast init done
[   29.570254] adb device [2]: 2 0xC3
[   29.618380] adb device [3]: 3 0x1
[   29.663900] adb device [7]: 7 0x1F
[   29.720910] ADB keyboard at 2 has handler 0xC3
[   29.776681] Detected ADB keyboard, type ANSI.
[   29.831871] input: ADB keyboard as /devices/virtual/input/input0
[   29.906693] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   29.986514] hda: MWDMA2 mode selected
[   30.033814] input: ADB Powerbook buttons as /devices/virtual/input/input1
[   30.118138] ide0 at 0xe1045000-0xe1045070,0xe1045160 on irq 30
[   30.192469] ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 1 (mediabay), irq 36
[   30.299391] Probing IDE interface ide1...
[   30.412609] ADB mouse (trackpad) at 3 has handler 0x4
[   30.476206] input: ADB mouse as /devices/virtual/input/input2
[   30.889011] hdc: MATSHITADVD-ROM SR-8182, ATAPI CD/DVD-ROM drive
[   31.379281] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   31.459300] hdc: MWDMA2 mode selected
[   31.506018] ide1 at 0xe104b000-0xe104b070,0xe104b160 on irq 36
[   31.580403] ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 4 (mediabay), irq 36
[   31.687369] genirq: Flags mismatch irq 36. 00000000 (ide2) vs. 00000000 (ide1)
[   31.776841] ide2: disabled, unable to get IRQ 36
[   31.834841] ide2: failed to initialize IDE interface
[   31.897376] ide2: disabling port
[   31.938867] ide-pmac: probe of 1.00021000:ata4 failed with error -1
[   32.017021] ide-gd driver 1.18
[   32.056731] hda: max request size: 1024KiB
[   34.309043] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63
[   34.400766] hda: cache flushes supported
[   34.463701]  hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15
[   34.589982] ide-cd driver 5.00
[   34.633445] ide-cd: hdc: ATAPI 12X DVD-ROM drive, 512kB Cache
[   34.705160] cdrom: Uniform CD-ROM driver Revision: 3.20
[   34.777383] mesh: configured for synchronous 5 MB/s
[   35.058944] mesh: performing initial bus reset...
[   39.168977] scsi host0: MESH
[   41.986409] eth0: BMAC at 00:05:02:07:5a:a6
[   41.986423] 
[   42.065206] aoe: cannot create debugfs directory
[   42.124930] aoe: AoE v85 initialised.
[   42.171200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   42.252472] ehci-pci: EHCI PCI platform driver
[   42.308931] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   42.386046] ohci-pci: OHCI PCI platform driver
[   42.442614] usbcore: registered new interface driver uas
[   42.509535] usbcore: registered new interface driver usb-storage
[   42.587749] mousedev: PS/2 mouse device common for all mice
[   42.661012] rtc-generic rtc-generic: registered as rtc0
[   42.727259] i2c /dev entries driver
[   42.773732] PowerMac i2c bus pmu 2 registered
[   42.830093] PowerMac i2c bus pmu 1 registered
[   42.891093] usbcore: registered new interface driver usbhid
[   42.960484] usbhid: USB HID core driver
[   43.012330] NET: Registered protocol family 17
[   43.068724] drmem: No dynamic reconfiguration memory found
[   43.138959] Loading compiled-in X.509 certificates
[   43.637737] EXT4-fs (hda11): mounting ext3 file system using the ext4 subsystem
[   43.759598] EXT4-fs (hda11): mounted filesystem with ordered data mode. Opts: (null)
[   43.855814] VFS: Mounted root (ext3 filesystem) readonly on device 3:11.
[   43.941974] Freeing unused kernel memory: 264K
[   43.997598] This architecture does not have kernel memory protection.
[   44.077215] Run /sbin/init as init process
[   46.583096] Disabling lock debugging due to kernel taint
[   46.649135] Machine check in kernel mode.
[   46.699359] Caused by (from SRR1=41020): Transfer error ack signal
[   46.776706] Oops: Machine check, sig: 7 [#1]
[   46.830093] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
[   46.899131] Modules linked in:
[   46.937774] CPU: 0 PID: 1 Comm: init Tainted: G   M              5.1.0-pmac-ide #1
[   47.030839] NIP:  c0018aa8 LR: c0018fcc CTR: 00000000
[   47.093580] REGS: df437d40 TRAP: 0200   Tainted: G   M               (5.1.0-pmac-ide)
[   47.189853] MSR:  00041020 <ME,IR>  CR: 42428084  XER: 00000000
[   47.263133] DAR: 00000000 DSISR: dec05da0 
[   47.263133] GPR00: 00000bbb df437df0 df435160 000043cb b7ad4000 1ec0cb50 00000001 00020768 
[   47.263133] GPR08: 00000000 00739578 00009032 8021e59e 20424084 00000000 00000000 00000000 
[   47.263133] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 dec0c000 c0730000 
[   47.263133] GPR24: dec0cb50 1fb21595 dec05da0 df437e18 dec07440 dffe13c0 1fb1e117 df437e18 
[   47.733625] NIP [c0018aa8] flush_hash_pages+0x70/0x164
[   47.797425] LR [c0018fcc] flush_tlb_page+0x54/0x78
[   47.857012] Call Trace:
[   47.888320] [df437df0] [dffe13c0] 0xdffe13c0 (unreliable)
[   47.955245] [df437e00] [c00f9418] ptep_clear_flush+0x3c/0x58
[   48.025313] [df437e10] [c00ecf34] wp_page_copy+0x198/0x530
[   48.093280] [df437e50] [c00ef5e0] do_wp_page+0x188/0x604
[   48.159151] [df437e90] [c00f0838] handle_mm_fault+0x2f8/0x99c
[   48.230265] [df437f00] [c0016528] do_page_fault+0x2a0/0x6b8
[   48.299289] [df437f40] [c0012314] handle_page_fault+0x14/0x40
[   48.370397] --- interrupt: 301 at 0xb7ab6444
[   48.370397]     LR = 0xb7ab634c
[   48.465462] Instruction dump:
[   48.502950] 38c6ffff 4bffffe0 1c633810 5480273e 1c000111 7c630214 546b3870 508b56be 
[   48.598090] 656b8000 3d200074 39299578 8102009c <65080009> 7c004828 2c000000 4082000c 
[   48.695375] ---[ end trace c4d36e2b09ab4631 ]---
[   48.752918] 

-- 


More information about the Linuxppc-dev mailing list