[PATCH] ocxl: Allow contexts to be attached with a NULL mm

[Frederic Barrat]

Le 18/06/2019 à 03:50, Andrew Donnellan a écrit :
> On 17/6/19 2:41 pm, Alastair D'Silva wrote:
>> From: Alastair D'Silva <alastair at d-silva.org>
>>
>> If an OpenCAPI context is to be used directly by a kernel driver, there
>> may not be a suitable mm to use.
>>
>> The patch makes the mm parameter to ocxl_context_attach optional.
>>
>> Signed-off-by: Alastair D'Silva <alastair at d-silva.org>
> 
> The one issue I can see here is that using mm == NULL bypasses our 
> method of enabling/disabling global TLBIs in mm_context_add_copro().
> 
> Discussing this privately with Alastair and Fred - this should be fine, 
> but perhaps we should document that.


So indeed we should be fine. I confirmed with Nick that kernel space 
invalidations are already global today.
Nick mentioned that we should still be fine tomorrow, but in the distant 
future, we could imagine local usage of some part of the kernel space. 
It will require some work, but it would be best to add a comment in one 
of the kernel invalidation function (for example 
radix__flush_tlb_kernel_range()) that if a kernel invalidation ever 
becomes local, then clients of the nest MMU may need some work.

A few more comments below.


>> ---
>>   drivers/misc/ocxl/context.c |  9 ++++++---
>>   drivers/misc/ocxl/link.c    | 12 ++++++++----
>>   2 files changed, 14 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/misc/ocxl/context.c b/drivers/misc/ocxl/context.c
>> index bab9c9364184..994563a078eb 100644
>> --- a/drivers/misc/ocxl/context.c
>> +++ b/drivers/misc/ocxl/context.c
>> @@ -69,6 +69,7 @@ static void xsl_fault_error(void *data, u64 addr, 
>> u64 dsisr)
>>   int ocxl_context_attach(struct ocxl_context *ctx, u64 amr, struct 
>> mm_struct *mm)
>>   {
>>       int rc;
>> +    unsigned long pidr = 0;
>>       // Locks both status & tidr
>>       mutex_lock(&ctx->status_mutex);
>> @@ -77,9 +78,11 @@ int ocxl_context_attach(struct ocxl_context *ctx, 
>> u64 amr, struct mm_struct *mm)
>>           goto out;
>>       }
>> -    rc = ocxl_link_add_pe(ctx->afu->fn->link, ctx->pasid,
>> -            mm->context.id, ctx->tidr, amr, mm,
>> -            xsl_fault_error, ctx);
>> +    if (mm)
>> +        pidr = mm->context.id;
>> +
>> +    rc = ocxl_link_add_pe(ctx->afu->fn->link, ctx->pasid, pidr, 
>> ctx->tidr,
>> +                  amr, mm, xsl_fault_error, ctx);
>>       if (rc)
>>           goto out;
>> diff --git a/drivers/misc/ocxl/link.c b/drivers/misc/ocxl/link.c
>> index cce5b0d64505..43542f124807 100644
>> --- a/drivers/misc/ocxl/link.c
>> +++ b/drivers/misc/ocxl/link.c
>> @@ -523,7 +523,8 @@ int ocxl_link_add_pe(void *link_handle, int pasid, 
>> u32 pidr, u32 tidr,
>>       pe->amr = cpu_to_be64(amr);
>>       pe->software_state = cpu_to_be32(SPA_PE_VALID);
>> -    mm_context_add_copro(mm);
>> +    if (mm)
>> +        mm_context_add_copro(mm);


Same as above, we should add a comment here in the driver code that a 
kernel context is ok because invalidations are global.


We also need a new check in xsl_fault_handler(). A valid kernel address 
shouldn't fault, but it's still possible for the FPGA to try accessing a 
bogus kernel address. In which case, xsl_fault_handler() would be 
entered, with a valid fault context. We'll find pe_data in the tree 
based on the valid pe_handle, but pe_data->mm will be NULL. In that, we 
can return early, acknowledging the interrupt with ADDRESS_ERROR value 
(like we do if pe_data is not found in the tree).

   Fred


>>       /*
>>        * Barrier is to make sure PE is visible in the SPA before it
>>        * is used by the device. It also helps with the global TLBI
>> @@ -546,7 +547,8 @@ int ocxl_link_add_pe(void *link_handle, int pasid, 
>> u32 pidr, u32 tidr,
>>        * have a reference on mm_users. Incrementing mm_count solves
>>        * the problem.
>>        */
>> -    mmgrab(mm);
>> +    if (mm)
>> +        mmgrab(mm);
>>       trace_ocxl_context_add(current->pid, spa->spa_mem, pasid, pidr, 
>> tidr);
>>   unlock:
>>       mutex_unlock(&spa->spa_lock);
>> @@ -652,8 +654,10 @@ int ocxl_link_remove_pe(void *link_handle, int 
>> pasid)
>>       if (!pe_data) {
>>           WARN(1, "Couldn't find pe data when removing PE\n");
>>       } else {
>> -        mm_context_remove_copro(pe_data->mm);
>> -        mmdrop(pe_data->mm);
>> +        if (pe_data->mm) {
>> +            mm_context_remove_copro(pe_data->mm);
>> +            mmdrop(pe_data->mm);
>> +        }
>>           kfree_rcu(pe_data, rcu);
>>       }
>>   unlock:
>>
>