[PATCH v2 0/4] Additional fixes on Talitos driver

[Horia Geanta]

On 6/12/2019 8:52 AM, Christophe Leroy wrote:
> 
> 
> Le 11/06/2019 à 18:30, Horia Geanta a écrit :
>> On 6/11/2019 6:40 PM, Christophe Leroy wrote:
>>>
>>>
>>> Le 11/06/2019 à 17:37, Horia Geanta a écrit :
>>>> On 6/11/2019 5:39 PM, Christophe Leroy wrote:
>>>>> This series is the last set of fixes for the Talitos driver.
>>>>>
>>>>> We now get a fully clean boot on both SEC1 (SEC1.2 on mpc885) and
>>>>> SEC2 (SEC2.2 on mpc8321E) with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS:
>>>>>
>>>> I am getting below failures on a sec 3.3.2 (p1020rdb) for hmac(sha384) and
>>>> hmac(sha512):
>>>
>>> Is that new with this series or did you already have it before ?
>>>
>> Looks like this happens with or without this series.
> 
> Found the issue, that's in 
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=b8fbdc2bc4e71b62646031d5df5f08aafe15d5ad
> 
> CONFIG_CRYPTO_DEV_TALITOS_SEC2 should be CONFIG_CRYPTO_DEV_TALITOS2 instead.
> 
> Just sent a patch to fix it.
> 
Thanks, I've tested it and the hmac failures go away.

However, testing gets stuck.
Seems there is another issue lurking in the driver.

Used cryptodev-2.6/master with the following on top:
crypto: testmgr - add some more preemption points
	https://patchwork.kernel.org/patch/10972337/
crypto: talitos - fix max key size for sha384 and sha512
	https://patchwork.kernel.org/patch/10988473/

[...]
alg: skcipher: skipping comparison tests for ecb-3des-talitos because ecb(des3_ede-generic) is unavailable
INFO: task cryptomgr_test:314 blocked for more than 120 seconds.
      Not tainted 5.2.0-rc1-g905bfd415e8a #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
cryptomgr_test  D    0   314      2 0x00000800
Call Trace:
[e78337e0] [00000004] 0x4 (unreliable)
[e78338a8] [c08a6e5c] __schedule+0x20c/0x4d4
[e78338f8] [c08a7158] schedule+0x34/0xc8
[e7833908] [c08aa5ec] schedule_timeout+0x1d4/0x350
[e7833958] [c08a7be4] wait_for_common+0xa0/0x164
[e7833998] [c03a7b14] do_ahash_op+0xa4/0xc4
[e78339b8] [c03aba00] test_ahash_vec_cfg+0x188/0x5e4
[e7833aa8] [c03ac1c8] test_hash_vs_generic_impl+0x1b0/0x2b4
[e7833de8] [c03ac498] __alg_test_hash+0x1cc/0x2d0
[e7833e28] [c03a9fb4] alg_test.part.37+0x8c/0x3ac
[e7833ef8] [c03a54d0] cryptomgr_test+0x4c/0x54
[e7833f08] [c006c410] kthread+0xf8/0x124
[e7833f38] [c001227c] ret_from_kernel_thread+0x14/0x1c

addr2line on c03aba00 points to crypto/testmgr.c:1335

   1327)  if (cfg->finalization_type == FINALIZATION_TYPE_DIGEST ||
   1328)      vec->digest_error) {
   1329)          /* Just using digest() */
   1330)          ahash_request_set_callback(req, req_flags, crypto_req_done,
   1331)                                     &wait);
   1332)          ahash_request_set_crypt(req, tsgl->sgl, result, vec->psize);
   1333)          err = do_ahash_op(crypto_ahash_digest, req, &wait, cfg->nosimd);
   1334)          if (err) {
-> 1335)                  if (err == vec->digest_error)
   1336)                          return 0;
   1337)                  pr_err("alg: ahash: %s digest() failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n",
   1338)                         driver, vec_name, vec->digest_error, err,
   1339)                         cfg->name);
   1340)                  return err;
   1341)          }
   1342)          if (vec->digest_error) {
   1343)                  pr_err("alg: ahash: %s digest() unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n",
   1344)                         driver, vec_name, vec->digest_error, cfg->name);
   1345)                  return -EINVAL;
   1346)          }
   1347)          goto result_ready;
   1348)  }

Seems that for some reason driver does not receive the interrupt from HW,
thus completion callback does not run.

Tried with or without current patch series, no change in behaviour.

If you cannot reproduce and don't have any idea, I'll try the hard way
(git bisect).

Thanks,
Horia