[PATCH v2 06/10] powerpc/fsl_booke/32: implement KASLR infrastructure
Jason Yan
yanaijie at huawei.com
Wed Jul 31 12:03:01 AEST 2019
On 2019/7/30 17:34, Christophe Leroy wrote:
>
>
> Le 30/07/2019 à 09:42, Jason Yan a écrit :
>> This patch add support to boot kernel from places other than KERNELBASE.
>> Since CONFIG_RELOCATABLE has already supported, what we need to do is
>> map or copy kernel to a proper place and relocate. Freescale Book-E
>> parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1
>> entries are not suitable to map the kernel directly in a randomized
>> region, so we chose to copy the kernel to a proper place and restart to
>> relocate.
>>
>> The offset of the kernel was not randomized yet(a fixed 64M is set). We
>> will randomize it in the next patch.
>>
>> Signed-off-by: Jason Yan <yanaijie at huawei.com>
>> Cc: Diana Craciun <diana.craciun at nxp.com>
>> Cc: Michael Ellerman <mpe at ellerman.id.au>
>> Cc: Christophe Leroy <christophe.leroy at c-s.fr>
>> Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
>> Cc: Paul Mackerras <paulus at samba.org>
>> Cc: Nicholas Piggin <npiggin at gmail.com>
>> Cc: Kees Cook <keescook at chromium.org>
>> ---
>> arch/powerpc/Kconfig | 11 +++
>> arch/powerpc/kernel/Makefile | 1 +
>> arch/powerpc/kernel/early_32.c | 2 +-
>> arch/powerpc/kernel/fsl_booke_entry_mapping.S | 13 ++-
>> arch/powerpc/kernel/head_fsl_booke.S | 15 +++-
>> arch/powerpc/kernel/kaslr_booke.c | 84 +++++++++++++++++++
>> arch/powerpc/mm/mmu_decl.h | 6 ++
>> arch/powerpc/mm/nohash/fsl_booke.c | 7 +-
>> 8 files changed, 126 insertions(+), 13 deletions(-)
>> create mode 100644 arch/powerpc/kernel/kaslr_booke.c
>>
>
> [...]
>
>> diff --git a/arch/powerpc/kernel/head_fsl_booke.S
>> b/arch/powerpc/kernel/head_fsl_booke.S
>> index 2083382dd662..a466c0f0d028 100644
>> --- a/arch/powerpc/kernel/head_fsl_booke.S
>> +++ b/arch/powerpc/kernel/head_fsl_booke.S
>> @@ -155,6 +155,8 @@ _ENTRY(_start);
>> */
>> _ENTRY(__early_start)
>> + LOAD_REG_ADDR_PIC(r20, kimage_vaddr)
>> + lwz r20,0(r20)
>> #define ENTRY_MAPPING_BOOT_SETUP
>> #include "fsl_booke_entry_mapping.S"
>> @@ -277,8 +279,8 @@ set_ivor:
>> ori r6, r6, swapper_pg_dir at l
>> lis r5, abatron_pteptrs at h
>> ori r5, r5, abatron_pteptrs at l
>> - lis r4, KERNELBASE at h
>> - ori r4, r4, KERNELBASE at l
>> + lis r3, kimage_vaddr at ha
>> + lwz r4, kimage_vaddr at l(r3)
>> stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
>> stw r6, 0(r5)
>> @@ -1067,7 +1069,14 @@ __secondary_start:
>> mr r5,r25 /* phys kernel start */
>> rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */
>> subf r4,r5,r4 /* memstart_addr - phys kernel start */
>> - li r5,0 /* no device tree */
>> +#ifdef CONFIG_RANDOMIZE_BASE
>
> Is that #ifdef really necessary ? Wouldn't it also work as expected when
> CONFIG_RANDOMIZE_BASE is not selected ?
>
Yes, it will also work if CONFIG_RANDOMIZE_BASE is not enabled. I can
remove it.
>> + lis r7,KERNELBASE at h
>> + ori r7,r7,KERNELBASE at l
>> + cmpw r20,r7 /* if kimage_vaddr != KERNELBASE,
>> randomized */
>> + beq 2f
>> + li r4,0
>> +#endif
>> +2: li r5,0 /* no device tree */
>> li r6,0 /* not boot cpu */
>> bl restore_to_as0
>> diff --git a/arch/powerpc/kernel/kaslr_booke.c
>> b/arch/powerpc/kernel/kaslr_booke.c
>> new file mode 100644
>> index 000000000000..960bce4aa8b9
>> --- /dev/null
>> +++ b/arch/powerpc/kernel/kaslr_booke.c
>> @@ -0,0 +1,84 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2019 Jason Yan <yanaijie at huawei.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/signal.h>
>> +#include <linux/sched.h>
>> +#include <linux/kernel.h>
>> +#include <linux/errno.h>
>> +#include <linux/string.h>
>> +#include <linux/types.h>
>> +#include <linux/ptrace.h>
>> +#include <linux/mman.h>
>> +#include <linux/mm.h>
>> +#include <linux/swap.h>
>> +#include <linux/stddef.h>
>> +#include <linux/vmalloc.h>
>> +#include <linux/init.h>
>> +#include <linux/delay.h>
>> +#include <linux/highmem.h>
>> +#include <linux/memblock.h>
>> +#include <asm/pgalloc.h>
>> +#include <asm/prom.h>
>> +#include <asm/io.h>
>> +#include <asm/mmu_context.h>
>> +#include <asm/pgtable.h>
>> +#include <asm/mmu.h>
>> +#include <linux/uaccess.h>
>> +#include <asm/smp.h>
>> +#include <asm/machdep.h>
>> +#include <asm/setup.h>
>> +#include <asm/paca.h>
>> +#include <mm/mmu_decl.h>
>> +
>> +extern int is_second_reloc;
>
> Couldn't the above be a bool ?
>
This variable is both used in C and assembly. Use int make it more
explicit to compare it with 0 or 1 in assembly.
>> +
>> +static unsigned long __init kaslr_choose_location(void *dt_ptr,
>> phys_addr_t size,
>> + unsigned long kernel_sz)
>> +{
>> + /* return a fixed offset of 64M for now */
>> + return 0x4000000;
>
> 64 << 20 would maybe be more explicit than 0x4000000.
>
> Or return SZ_64M ?
>
SZ_64M would be good.
> Christophe
>
>> +}
>> +
>> +/*
>> + * To see if we need to relocate the kernel to a random offset
>> + * void *dt_ptr - address of the device tree
>> + * phys_addr_t size - size of the first memory block
>> + */
>> +notrace void __init kaslr_early_init(void *dt_ptr, phys_addr_t size)
>> +{
>> + unsigned long tlb_virt;
>> + phys_addr_t tlb_phys;
>> + unsigned long offset;
>> + unsigned long kernel_sz;
>> +
>> + kernel_sz = (unsigned long)_end - KERNELBASE;
>> +
>> + offset = kaslr_choose_location(dt_ptr, size, kernel_sz);
>> +
>> + if (offset == 0)
>> + return;
>> +
>> + kimage_vaddr += offset;
>> + kernstart_addr += offset;
>> +
>> + is_second_reloc = 1;
>> +
>> + if (offset >= SZ_64M) {
>> + tlb_virt = round_down(kimage_vaddr, SZ_64M);
>> + tlb_phys = round_down(kernstart_addr, SZ_64M);
>> +
>> + /* Create kernel map to relocate in */
>> + create_tlb_entry(tlb_phys, tlb_virt, 1);
>> + }
>> +
>> + /* Copy the kernel to it's new location and run */
>> + memcpy((void *)kimage_vaddr, (void *)KERNELBASE, kernel_sz);
>> +
>> + reloc_kernel_entry(dt_ptr, kimage_vaddr);
>> +}
>> diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
>> index 804da298beb3..9332772c8a66 100644
>> --- a/arch/powerpc/mm/mmu_decl.h
>> +++ b/arch/powerpc/mm/mmu_decl.h
>> @@ -148,6 +148,12 @@ void reloc_kernel_entry(void *fdt, int addr);
>> extern void loadcam_entry(unsigned int index);
>> extern void loadcam_multi(int first_idx, int num, int tmp_idx);
>> +#ifdef CONFIG_RANDOMIZE_BASE
>> +void kaslr_early_init(void *dt_ptr, phys_addr_t size);
>> +#else
>> +static inline void kaslr_early_init(void *dt_ptr, phys_addr_t size) {}
>> +#endif
>> +
>> struct tlbcam {
>> u32 MAS0;
>> u32 MAS1;
>> diff --git a/arch/powerpc/mm/nohash/fsl_booke.c
>> b/arch/powerpc/mm/nohash/fsl_booke.c
>> index 556e3cd52a35..8d25a8dc965f 100644
>> --- a/arch/powerpc/mm/nohash/fsl_booke.c
>> +++ b/arch/powerpc/mm/nohash/fsl_booke.c
>> @@ -263,7 +263,8 @@ void setup_initial_memory_limit(phys_addr_t
>> first_memblock_base,
>> int __initdata is_second_reloc;
>> notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
>> {
>> - unsigned long base = KERNELBASE;
>> + unsigned long base = kimage_vaddr;
>> + phys_addr_t size;
>> kernstart_addr = start;
>> if (is_second_reloc) {
>> @@ -291,7 +292,7 @@ notrace void __init relocate_init(u64 dt_ptr,
>> phys_addr_t start)
>> start &= ~0x3ffffff;
>> base &= ~0x3ffffff;
>> virt_phys_offset = base - start;
>> - early_get_first_memblock_info(__va(dt_ptr), NULL);
>> + early_get_first_memblock_info(__va(dt_ptr), &size);
>> /*
>> * We now get the memstart_addr, then we should check if this
>> * address is the same as what the PAGE_OFFSET map to now. If
>> @@ -316,6 +317,8 @@ notrace void __init relocate_init(u64 dt_ptr,
>> phys_addr_t start)
>> /* We should never reach here */
>> panic("Relocation error");
>> }
>> +
>> + kaslr_early_init(__va(dt_ptr), size);
>> }
>> #endif
>> #endif
>>
>
> .
>
More information about the Linuxppc-dev
mailing list