[PATCH] powerpc/kmcent2: update the ethernet devices' phy properties

[Scott Wood]

On Sun, 2019-07-28 at 18:01 +0200, Valentin Longchamp wrote:
> Hi Scott, Kumar,
> 
> Looking at this patch I have realised that I had already submitted it
> to the mailing list nearly 2 years ago:
> https://patchwork.ozlabs.org/patch/842944/
> 
> Could you please make sure that this one gets merged in the next
> window, so that I avoid forgetting such a patch a 2nd time ?
> 
> Thanks a lot

I added it to my patchwork todo list; thanks for the reminder.

> Le dim. 14 juil. 2019 à 22:05, Valentin Longchamp
> <valentin at longchamp.me> a écrit :
> > 
> > Change all phy-connection-type properties to phy-mode that are better
> > supported by the fman driver.
> > 
> > Use the more readable fixed-link node for the 2 sgmii links.
> > 
> > Change the RGMII link to rgmii-id as the clock delays are added by the
> > phy.
> > 
> > Signed-off-by: Valentin Longchamp <valentin at longchamp.me>

I don't see any other uses of phy-mode in arch/powerpc/boot/dts/fsl, and I see
lots of phy-connection-type with fman.  Madalin, does this patch look OK?

-Scott

> > ---
> >  arch/powerpc/boot/dts/fsl/kmcent2.dts | 16 +++++++++++-----
> >  1 file changed, 11 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/powerpc/boot/dts/fsl/kmcent2.dts
> > b/arch/powerpc/boot/dts/fsl/kmcent2.dts
> > index 48b7f9797124..c3e0741cafb1 100644
> > --- a/arch/powerpc/boot/dts/fsl/kmcent2.dts
> > +++ b/arch/powerpc/boot/dts/fsl/kmcent2.dts
> > @@ -210,13 +210,19 @@
> > 
> >                 fman at 400000 {
> >                         ethernet at e0000 {
> > -                               fixed-link = <0 1 1000 0 0>;
> > -                               phy-connection-type = "sgmii";
> > +                               phy-mode = "sgmii";
> > +                               fixed-link {
> > +                                       speed = <1000>;
> > +                                       full-duplex;
> > +                               };
> >                         };
> > 
> >                         ethernet at e2000 {
> > -                               fixed-link = <1 1 1000 0 0>;
> > -                               phy-connection-type = "sgmii";
> > +                               phy-mode = "sgmii";
> > +                               fixed-link {
> > +                                       speed = <1000>;
> > +                                       full-duplex;
> > +                               };
> >                         };
> > 
> >                         ethernet at e4000 {
> > @@ -229,7 +235,7 @@
> > 
> >                         ethernet at e8000 {
> >                                 phy-handle = <&front_phy>;
> > -                               phy-connection-type = "rgmii";
> > +                               phy-mode = "rgmii-id";
> >                         };
> > 
> >                         mdio0: mdio at fc000 {
> > --
> > 2.17.1
> > 
> 
>