[RFC PATCH 00/10] implement KASLR for powerpc/fsl_booke/32

[Diana Madalina Craciun]

Hi Jason,

I have briefly tested yesterday on a P4080 board and did not see any
issues. I do not have much expertise on KASLR, but I will take a look
over the code.

Regards,
Diana

On 7/25/2019 10:16 AM, Jason Yan wrote:
> Hi all, any comments?
>
>
> On 2019/7/17 16:06, Jason Yan wrote:
>> This series implements KASLR for powerpc/fsl_booke/32, as a security
>> feature that deters exploit attempts relying on knowledge of the location
>> of kernel internals.
>>
>> Since CONFIG_RELOCATABLE has already supported, what we need to do is
>> map or copy kernel to a proper place and relocate. Freescale Book-E
>> parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1
>> entries are not suitable to map the kernel directly in a randomized
>> region, so we chose to copy the kernel to a proper place and restart to
>> relocate.
>>
>> Entropy is derived from the banner and timer base, which will change every
>> build and boot. This not so much safe so additionally the bootloader may
>> pass entropy via the /chosen/kaslr-seed node in device tree.
>>
>> We will use the first 512M of the low memory to randomize the kernel
>> image. The memory will be split in 64M zones. We will use the lower 8
>> bit of the entropy to decide the index of the 64M zone. Then we chose a
>> 16K aligned offset inside the 64M zone to put the kernel in.
>>
>>      KERNELBASE
>>
>>          |-->   64M   <--|
>>          |               |
>>          +---------------+    +----------------+---------------+
>>          |               |....|    |kernel|    |               |
>>          +---------------+    +----------------+---------------+
>>          |                         |
>>          |----->   offset    <-----|
>>
>>                                kimage_vaddr
>>
>> We also check if we will overlap with some areas like the dtb area, the
>> initrd area or the crashkernel area. If we cannot find a proper area,
>> kaslr will be disabled and boot from the original kernel.
>>
>> Jason Yan (10):
>>    powerpc: unify definition of M_IF_NEEDED
>>    powerpc: move memstart_addr and kernstart_addr to init-common.c
>>    powerpc: introduce kimage_vaddr to store the kernel base
>>    powerpc/fsl_booke/32: introduce create_tlb_entry() helper
>>    powerpc/fsl_booke/32: introduce reloc_kernel_entry() helper
>>    powerpc/fsl_booke/32: implement KASLR infrastructure
>>    powerpc/fsl_booke/32: randomize the kernel image offset
>>    powerpc/fsl_booke/kaslr: clear the original kernel if randomized
>>    powerpc/fsl_booke/kaslr: support nokaslr cmdline parameter
>>    powerpc/fsl_booke/kaslr: dump out kernel offset information on panic
>>
>>   arch/powerpc/Kconfig                          |  11 +
>>   arch/powerpc/include/asm/nohash/mmu-book3e.h  |  10 +
>>   arch/powerpc/include/asm/page.h               |   7 +
>>   arch/powerpc/kernel/Makefile                  |   1 +
>>   arch/powerpc/kernel/early_32.c                |   2 +-
>>   arch/powerpc/kernel/exceptions-64e.S          |  10 -
>>   arch/powerpc/kernel/fsl_booke_entry_mapping.S |  23 +-
>>   arch/powerpc/kernel/head_fsl_booke.S          |  61 ++-
>>   arch/powerpc/kernel/kaslr_booke.c             | 439 ++++++++++++++++++
>>   arch/powerpc/kernel/machine_kexec.c           |   1 +
>>   arch/powerpc/kernel/misc_64.S                 |   5 -
>>   arch/powerpc/kernel/setup-common.c            |  23 +
>>   arch/powerpc/mm/init-common.c                 |   7 +
>>   arch/powerpc/mm/init_32.c                     |   5 -
>>   arch/powerpc/mm/init_64.c                     |   5 -
>>   arch/powerpc/mm/mmu_decl.h                    |  10 +
>>   arch/powerpc/mm/nohash/fsl_booke.c            |   8 +-
>>   17 files changed, 580 insertions(+), 48 deletions(-)
>>   create mode 100644 arch/powerpc/kernel/kaslr_booke.c
>>
>