[PATCH v3 1/9] powerpc/64: Adjust order in pcibios_init()

Sam Bobroff sbobroff at linux.ibm.com
Tue Jul 23 13:44:12 AEST 2019


The pcibios_init() function for 64 bit PowerPC currently calls
pci_bus_add_devices() before pcibios_resource_survey(), which seems
incorrect because it adds devices and attempts to bind their drivers
before allocating their resources (although no problems seem to be
apparent).

So move the call to pci_bus_add_devices() to after
pcibios_resource_survey(), while extracting call to the
pcibios_fixup() hook so that it remains in the same location.

This will also allow the ppc_md.pcibios_bus_add_device() hooks to
perform actions that depend on PCI resources, both during rescanning
(where this is already the case) and at boot time, to support future
work.

Signed-off-by: Sam Bobroff <sbobroff at linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik at ozlabs.ru>
---
 arch/powerpc/kernel/pci-common.c |  4 ----
 arch/powerpc/kernel/pci_32.c     |  4 ++++
 arch/powerpc/kernel/pci_64.c     | 12 +++++++++---
 3 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f627e15bb43c..1c448cf25506 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1379,10 +1379,6 @@ void __init pcibios_resource_survey(void)
 		pr_debug("PCI: Assigning unassigned resources...\n");
 		pci_assign_unassigned_resources();
 	}
-
-	/* Call machine dependent fixup */
-	if (ppc_md.pcibios_fixup)
-		ppc_md.pcibios_fixup();
 }
 
 /* This is used by the PCI hotplug driver to allocate resource
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 50942a1d1a5f..b49e1060a3bf 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -263,6 +263,10 @@ static int __init pcibios_init(void)
 	/* Call common code to handle resource allocation */
 	pcibios_resource_survey();
 
+	/* Call machine dependent fixup */
+	if (ppc_md.pcibios_fixup)
+		ppc_md.pcibios_fixup();
+
 	/* Call machine dependent post-init code */
 	if (ppc_md.pcibios_after_init)
 		ppc_md.pcibios_after_init();
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index b7030b1189d0..f83d1f69b1dd 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -54,14 +54,20 @@ static int __init pcibios_init(void)
 	pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
 
 	/* Scan all of the recorded PCI controllers.  */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
 		pcibios_scan_phb(hose);
-		pci_bus_add_devices(hose->bus);
-	}
 
 	/* Call common code to handle resource allocation */
 	pcibios_resource_survey();
 
+	/* Add devices. */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+		pci_bus_add_devices(hose->bus);
+
+	/* Call machine dependent fixup */
+	if (ppc_md.pcibios_fixup)
+		ppc_md.pcibios_fixup();
+
 	printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
 
 	return 0;
-- 
2.22.0.216.g00a2a96fc9



More information about the Linuxppc-dev mailing list