[PATCH 07/10] ASoC: fsl_sai: Add support for FIFO combine mode

Daniel Baluta daniel.baluta at nxp.com
Mon Jul 22 22:48:30 AEST 2019


FIFO combining mode allows the separate FIFOs for multiple data channels
to be used as a single FIFO for either software accesses or a single data
channel or both.

FIFO combined mode is described in chapter 13.10.3.5.4 from i.MX8MQ
reference manual [1].

For each direction (RX/TX) fifo combine mode is read from fsl,fcomb-mode
DT property. By default, if no property is specified fifo combine mode
is disabled.

[1]https://cache.nxp.com/secured/assets/documents/en/reference-manual/IMX8MDQLQRM.pdf?__gda__=1563728701_38bea7f0f726472cc675cb141b91bec7&fileExt=.pdf

Signed-off-by: Daniel Baluta <daniel.baluta at nxp.com>
---
 sound/soc/fsl/fsl_sai.c | 37 +++++++++++++++++++++++++++++++++++++
 sound/soc/fsl/fsl_sai.h |  9 +++++++++
 2 files changed, 46 insertions(+)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index d0fa02188b7c..140014901fce 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -475,6 +475,35 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
+	switch (sai->soc_data->fcomb_mode[tx]) {
+	case FSL_SAI_FCOMB_NONE:
+		regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
+				   FSL_SAI_CR4_FCOMB_SOFT |
+				   FSL_SAI_CR4_FCOMB_SHIFT, 0);
+		break;
+	case FSL_SAI_FCOMB_SHIFT:
+		regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
+				   FSL_SAI_CR4_FCOMB_SOFT |
+				   FSL_SAI_CR4_FCOMB_SHIFT,
+				   FSL_SAI_CR4_FCOMB_SHIFT);
+		break;
+	case FSL_SAI_FCOMB_SOFT:
+		regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
+				   FSL_SAI_CR4_FCOMB_SOFT |
+				   FSL_SAI_CR4_FCOMB_SHIFT,
+				   FSL_SAI_CR4_FCOMB_SOFT);
+		break;
+	case FSL_SAI_FCOMB_BOTH:
+		regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
+				   FSL_SAI_CR4_FCOMB_SOFT |
+				   FSL_SAI_CR4_FCOMB_SHIFT,
+				   FSL_SAI_CR4_FCOMB_SOFT |
+				   FSL_SAI_CR4_FCOMB_SHIFT);
+		break;
+	default:
+		break;
+	}
+
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
 			   val_cr4);
@@ -887,6 +916,14 @@ static int fsl_sai_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* FIFO combine mode for TX/RX, defaults to disabled */
+	sai->fcomb_mode[RX] = FSL_SAI_FCOMB_NONE;
+	sai->fcomb_mode[TX] = FSL_SAI_FCOMB_NONE;
+	of_property_read_u32_index(np, "fsl,fcomb-mode", RX,
+				   &sai->fcomb_mode[RX]);
+	of_property_read_u32_index(np, "fsl,fcomb-mode", TX,
+				   &sai->fcomb_mode[TX]);
+
 	/* active data lines mask for TX/RX, defaults to 1 (only the first
 	 * data line is enabled
 	 */
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 6d32f0950ec5..abf140951187 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -115,6 +115,8 @@
 #define FSL_SAI_CR3_WDFL_MASK	0x1f
 
 /* SAI Transmit and Receive Configuration 4 Register */
+#define FSL_SAI_CR4_FCOMB_SHIFT BIT(26)
+#define FSL_SAI_CR4_FCOMB_SOFT  BIT(27)
 #define FSL_SAI_CR4_FRSZ(x)	(((x) - 1) << 16)
 #define FSL_SAI_CR4_FRSZ_MASK	(0x1f << 16)
 #define FSL_SAI_CR4_SYWD(x)	(((x) - 1) << 8)
@@ -155,6 +157,12 @@
 #define FSL_SAI_MAXBURST_TX 6
 #define FSL_SAI_MAXBURST_RX 6
 
+/* FIFO combine modes */
+#define FSL_SAI_FCOMB_NONE     0
+#define FSL_SAI_FCOMB_SHIFT    1
+#define FSL_SAI_FCOMB_SOFT     2
+#define FSL_SAI_FCOMB_BOTH     3
+
 struct fsl_sai_soc_data {
 	bool use_imx_pcm;
 	unsigned int fifo_depth;
@@ -177,6 +185,7 @@ struct fsl_sai {
 	unsigned int slot_width;
 
 	unsigned int dl_mask[2];
+	unsigned int fcomb_mode[2];
 
 	const struct fsl_sai_soc_data *soc_data;
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
-- 
2.17.1



More information about the Linuxppc-dev mailing list