[PATCH 05/10] ASoC: fsl_sai: Add support to enable multiple data lines
Daniel Baluta
daniel.baluta at nxp.com
Mon Jul 22 22:48:28 AEST 2019
SAI supports up to 8 Rx/Tx data lines which can be enabled
using TCE/RCE bits of TCR3/RCR3 registers.
Data lines to be enabled are read from DT fsl,dl_mask property.
By default (if no DT entry is provided) only data line 0 is enabled.
Note:
We can only enable consecutive data lines starting with data line #0.
Signed-off-by: Daniel Baluta <daniel.baluta at nxp.com>
---
sound/soc/fsl/fsl_sai.c | 10 +++++++++-
sound/soc/fsl/fsl_sai.h | 6 ++++--
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 768341608695..d0fa02188b7c 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -601,7 +601,7 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx),
FSL_SAI_CR3_TRCE_MASK,
- FSL_SAI_CR3_TRCE);
+ FSL_SAI_CR3_TRCE(sai->soc_data->dl_mask[tx]);
ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
@@ -887,6 +887,14 @@ static int fsl_sai_probe(struct platform_device *pdev)
}
}
+ /* active data lines mask for TX/RX, defaults to 1 (only the first
+ * data line is enabled
+ */
+ sai->dl_mask[RX] = 1;
+ sai->dl_mask[TX] = 1;
+ of_property_read_u32_index(np, "fsl,dl_mask", RX, &sai->dl_mask[RX]);
+ of_property_read_u32_index(np, "fsl,dl_mask", TX, &sai->dl_mask[TX]);
+
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index b1abeed2f78e..6d32f0950ec5 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -109,8 +109,8 @@
#define FSL_SAI_CR2_DIV_MASK 0xff
/* SAI Transmit and Receive Configuration 3 Register */
-#define FSL_SAI_CR3_TRCE BIT(16)
-#define FSL_SAI_CR3_TRCE_MASK GENMASK(16, 23)
+#define FSL_SAI_CR3_TRCE(x) ((x) << 16)
+#define FSL_SAI_CR3_TRCE_MASK GENMASK(23, 16)
#define FSL_SAI_CR3_WDFL(x) (x)
#define FSL_SAI_CR3_WDFL_MASK 0x1f
@@ -176,6 +176,8 @@ struct fsl_sai {
unsigned int slots;
unsigned int slot_width;
+ unsigned int dl_mask[2];
+
const struct fsl_sai_soc_data *soc_data;
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct snd_dmaengine_dai_dma_data dma_params_tx;
--
2.17.1
More information about the Linuxppc-dev
mailing list