[PATCH 5/5] powerpc/eeh_sysfs: Make clearing EEH_DEV_SYSFS saner

[Oliver O'Halloran]

The eeh_sysfs_remove_device() function is supposed to clear the
EEH_DEV_SYSFS flag since it indicates the EEH sysfs entries have been added
for a pci_dev.

When the sysfs files are removed eeh_remove_device() the eeh_dev and the
pci_dev have already been de-associated. This then causes the
pci_dev_to_eeh_dev() call in eeh_sysfs_remove_device() to return NULL so
the flag can't be cleared from the still-live eeh_dev. This problem is
worked around in the caller by clearing the flag manually. However, this
behaviour doesn't make a whole lot of sense, so this patch fixes it by:

a) Re-ordering eeh_remove_device() so that eeh_sysfs_remove_device() is
   called before de-associating the pci_dev and eeh_dev.

b) Making eeh_sysfs_remove_device() emit a warning if there's no
   corresponding eeh_dev for a pci_dev. The paths where the sysfs
   files are only reachable if EEH was setup for the device
   for the device in the first place so hitting this warning
   indicates a programming error.

Signed-off-by: Oliver O'Halloran <oohall at gmail.com>
---
 arch/powerpc/kernel/eeh.c       | 30 +++++++++++++++++-------------
 arch/powerpc/kernel/eeh_sysfs.c | 15 ++++++++-------
 2 files changed, 25 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index f192d57..6e24896 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1203,7 +1203,6 @@ void eeh_add_device_late(struct pci_dev *dev)
 		eeh_rmv_from_parent_pe(edev);
 		eeh_addr_cache_rmv_dev(edev->pdev);
 		eeh_sysfs_remove_device(edev->pdev);
-		edev->mode &= ~EEH_DEV_SYSFS;
 
 		/*
 		 * We definitely should have the PCI device removed
@@ -1306,17 +1305,11 @@ void eeh_remove_device(struct pci_dev *dev)
 	edev->pdev = NULL;
 
 	/*
-	 * The flag "in_error" is used to trace EEH devices for VFs
-	 * in error state or not. It's set in eeh_report_error(). If
-	 * it's not set, eeh_report_{reset,resume}() won't be called
-	 * for the VF EEH device.
+	 * eeh_sysfs_remove_device() uses pci_dev_to_eeh_dev() so we need to
+	 * remove the sysfs files before clearing dev.archdata.edev
 	 */
-	edev->in_error = false;
-	dev->dev.archdata.edev = NULL;
-	if (!(edev->pe->state & EEH_PE_KEEP))
-		eeh_rmv_from_parent_pe(edev);
-	else
-		edev->mode |= EEH_DEV_DISCONNECTED;
+	if (edev->mode & EEH_DEV_SYSFS)
+		eeh_sysfs_remove_device(dev);
 
 	/*
 	 * We're removing from the PCI subsystem, that means
@@ -1327,8 +1320,19 @@ void eeh_remove_device(struct pci_dev *dev)
 	edev->mode |= EEH_DEV_NO_HANDLER;
 
 	eeh_addr_cache_rmv_dev(dev);
-	eeh_sysfs_remove_device(dev);
-	edev->mode &= ~EEH_DEV_SYSFS;
+
+	/*
+	 * The flag "in_error" is used to trace EEH devices for VFs
+	 * in error state or not. It's set in eeh_report_error(). If
+	 * it's not set, eeh_report_{reset,resume}() won't be called
+	 * for the VF EEH device.
+	 */
+	edev->in_error = false;
+	dev->dev.archdata.edev = NULL;
+	if (!(edev->pe->state & EEH_PE_KEEP))
+		eeh_rmv_from_parent_pe(edev);
+	else
+		edev->mode |= EEH_DEV_DISCONNECTED;
 }
 
 int eeh_unfreeze_pe(struct eeh_pe *pe)
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index c4cc8fc..5614fd83 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -175,22 +175,23 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev)
 {
 	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
 
+	if (!edev) {
+		WARN_ON(eeh_enabled());
+		return;
+	}
+
+	edev->mode &= ~EEH_DEV_SYSFS;
+
 	/*
 	 * The parent directory might have been removed. We needn't
 	 * continue for that case.
 	 */
-	if (!pdev->dev.kobj.sd) {
-		if (edev)
-			edev->mode &= ~EEH_DEV_SYSFS;
+	if (!pdev->dev.kobj.sd)
 		return;
-	}
 
 	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_state);
 
 	eeh_notify_resume_remove(pdev);
-
-	if (edev)
-		edev->mode &= ~EEH_DEV_SYSFS;
 }
-- 
2.9.5