[PATCH v4 7/8] KVM: PPC: Ultravisor: Enter a secure guest
janani
janani at linux.ibm.com
Tue Jul 9 06:53:30 AEST 2019
On 2019-06-28 15:08, Claudio Carvalho wrote:
> From: Sukadev Bhattiprolu <sukadev at linux.vnet.ibm.com>
>
> To enter a secure guest, we have to go through the ultravisor,
> therefore
> we do a ucall when we are entering a secure guest.
>
> This change is needed for any sort of entry to the secure guest from
> the
> hypervisor, whether it is a return from an hcall, a return from a
> hypervisor interrupt, or the first time that a secure guest vCPU is
> run.
>
> If we are returning from an hcall, the results are already in the
> appropriate registers R3:12, except for R3, R6 and R7. R3 has the
> status
> of the reflected hcall, therefore we move it to R0 for the ultravisor
> and
> set R3 to the UV_RETURN ucall number. R6,7 were used as temporary
> registers, hence we restore them.
>
> Have fast_guest_return check the kvm_arch.secure_guest field so that a
> new CPU enters UV when started (in response to a RTAS start-cpu call).
>
> Thanks to input from Paul Mackerras, Ram Pai and Mike Anderson.
>
> Signed-off-by: Sukadev Bhattiprolu <sukadev at linux.vnet.ibm.com>
> [ Pass SRR1 in r11 for UV_RETURN, fix kvmppc_msr_interrupt to preserve
> the MSR_S bit ]
> Signed-off-by: Paul Mackerras <paulus at ozlabs.org>
> [ Fix UV_RETURN ucall number and arch.secure_guest check ]
> Signed-off-by: Ram Pai <linuxram at us.ibm.com>
> [ Save the actual R3 in R0 for the ultravisor and use R3 for the
> UV_RETURN ucall number. Update commit message and ret_to_ultra
> comment ]
> Signed-off-by: Claudio Carvalho <cclaudio at linux.ibm.com>
Reviewed-by: Janani Janakiraman <janani at linux.ibm.com>
> ---
> arch/powerpc/include/asm/kvm_host.h | 1 +
> arch/powerpc/include/asm/ultravisor-api.h | 1 +
> arch/powerpc/kernel/asm-offsets.c | 1 +
> arch/powerpc/kvm/book3s_hv_rmhandlers.S | 40 +++++++++++++++++++----
> 4 files changed, 37 insertions(+), 6 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/kvm_host.h
> b/arch/powerpc/include/asm/kvm_host.h
> index 013c76a0a03e..184becb62ea4 100644
> --- a/arch/powerpc/include/asm/kvm_host.h
> +++ b/arch/powerpc/include/asm/kvm_host.h
> @@ -294,6 +294,7 @@ struct kvm_arch {
> cpumask_t cpu_in_guest;
> u8 radix;
> u8 fwnmi_enabled;
> + u8 secure_guest;
> bool threads_indep;
> bool nested_enable;
> pgd_t *pgtable;
> diff --git a/arch/powerpc/include/asm/ultravisor-api.h
> b/arch/powerpc/include/asm/ultravisor-api.h
> index 141940771add..7c4d0b4ced12 100644
> --- a/arch/powerpc/include/asm/ultravisor-api.h
> +++ b/arch/powerpc/include/asm/ultravisor-api.h
> @@ -19,5 +19,6 @@
>
> /* opcodes */
> #define UV_WRITE_PATE 0xF104
> +#define UV_RETURN 0xF11C
>
> #endif /* _ASM_POWERPC_ULTRAVISOR_API_H */
> diff --git a/arch/powerpc/kernel/asm-offsets.c
> b/arch/powerpc/kernel/asm-offsets.c
> index 8e02444e9d3d..44742724513e 100644
> --- a/arch/powerpc/kernel/asm-offsets.c
> +++ b/arch/powerpc/kernel/asm-offsets.c
> @@ -508,6 +508,7 @@ int main(void)
> OFFSET(KVM_VRMA_SLB_V, kvm, arch.vrma_slb_v);
> OFFSET(KVM_RADIX, kvm, arch.radix);
> OFFSET(KVM_FWNMI, kvm, arch.fwnmi_enabled);
> + OFFSET(KVM_SECURE_GUEST, kvm, arch.secure_guest);
> OFFSET(VCPU_DSISR, kvm_vcpu, arch.shregs.dsisr);
> OFFSET(VCPU_DAR, kvm_vcpu, arch.shregs.dar);
> OFFSET(VCPU_VPA, kvm_vcpu, arch.vpa.pinned_addr);
> diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> index cffb365d9d02..89813ca987c2 100644
> --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> @@ -36,6 +36,7 @@
> #include <asm/asm-compat.h>
> #include <asm/feature-fixups.h>
> #include <asm/cpuidle.h>
> +#include <asm/ultravisor-api.h>
>
> /* Sign-extend HDEC if not on POWER9 */
> #define EXTEND_HDEC(reg) \
> @@ -1092,16 +1093,12 @@ BEGIN_FTR_SECTION
> END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
>
> ld r5, VCPU_LR(r4)
> - ld r6, VCPU_CR(r4)
> mtlr r5
> - mtcr r6
>
> ld r1, VCPU_GPR(R1)(r4)
> ld r2, VCPU_GPR(R2)(r4)
> ld r3, VCPU_GPR(R3)(r4)
> ld r5, VCPU_GPR(R5)(r4)
> - ld r6, VCPU_GPR(R6)(r4)
> - ld r7, VCPU_GPR(R7)(r4)
> ld r8, VCPU_GPR(R8)(r4)
> ld r9, VCPU_GPR(R9)(r4)
> ld r10, VCPU_GPR(R10)(r4)
> @@ -1119,10 +1116,38 @@ BEGIN_FTR_SECTION
> mtspr SPRN_HDSISR, r0
> END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
>
> + ld r6, VCPU_KVM(r4)
> + lbz r7, KVM_SECURE_GUEST(r6)
> + cmpdi r7, 0
> + bne ret_to_ultra
> +
> + lwz r6, VCPU_CR(r4)
> + mtcr r6
> +
> + ld r7, VCPU_GPR(R7)(r4)
> + ld r6, VCPU_GPR(R6)(r4)
> ld r0, VCPU_GPR(R0)(r4)
> ld r4, VCPU_GPR(R4)(r4)
> HRFI_TO_GUEST
> b .
> +/*
> + * We are entering a secure guest, so we have to invoke the ultravisor
> to do
> + * that. If we are returning from a hcall, the results are already in
> the
> + * appropriate registers R3:12, except for R3, R6 and R7. R3 has the
> status of
> + * the reflected hcall, therefore we move it to R0 for the ultravisor
> and set
> + * R3 to the UV_RETURN ucall number. R6,7 were used as temporary
> registers
> + * above, hence we restore them.
> + */
> +ret_to_ultra:
> + lwz r6, VCPU_CR(r4)
> + mtcr r6
> + mfspr r11, SPRN_SRR1
> + mr r0, r3
> + LOAD_REG_IMMEDIATE(r3, UV_RETURN)
> + ld r7, VCPU_GPR(R7)(r4)
> + ld r6, VCPU_GPR(R6)(r4)
> + ld r4, VCPU_GPR(R4)(r4)
> + sc 2
>
> /*
> * Enter the guest on a P9 or later system where we have exactly
> @@ -3318,13 +3343,16 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
> * r0 is used as a scratch register
> */
> kvmppc_msr_interrupt:
> + andis. r0, r11, MSR_S at h
> rldicl r0, r11, 64 - MSR_TS_S_LG, 62
> - cmpwi r0, 2 /* Check if we are in transactional state.. */
> + cmpwi cr1, r0, 2 /* Check if we are in transactional state.. */
> ld r11, VCPU_INTR_MSR(r9)
> - bne 1f
> + bne cr1, 1f
> /* ... if transactional, change to suspended */
> li r0, 1
> 1: rldimi r11, r0, MSR_TS_S_LG, 63 - MSR_TS_T_LG
> + beqlr
> + oris r11, r11, MSR_S at h /* preserve MSR_S bit setting */
> blr
>
> /*
More information about the Linuxppc-dev
mailing list