[PATCH 09/14] powerpc/64s/exception: machine check restructure to reuse common macros
Nicholas Piggin
npiggin at gmail.com
Wed Jul 3 17:54:39 AEST 2019
Follow the pattern of sreset and HMI handlers more closely: use
EXCEPTION_PROLOG_COMMON_1 rather than open-coding it, and run the
handler at the relocated location.
This helps later simplification and code sharing.
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 71 ++++++++++++++--------------
1 file changed, 36 insertions(+), 35 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index ac7b5bb614d9..3cc5ee6e4b56 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -934,17 +934,23 @@ EXC_COMMON_BEGIN(system_reset_common)
EXC_REAL_BEGIN(machine_check, 0x200, 0x100)
EXCEPTION_PROLOG_0 PACA_EXMC
- b machine_check_common_early
+ EXCEPTION_PROLOG_1 EXC_STD, PACA_EXMC, 0, 0x200, 1, 1, 0
+ mfctr r10 /* save ctr, even for !RELOCATABLE */
+ BRANCH_TO_C000(r11, machine_check_early_common)
+ /*
+ * MSR_RI is not enabled, because PACA_EXMC is being used, so a
+ * nested machine check corrupts it. machine_check_common enables
+ * MSR_RI.
+ */
EXC_REAL_END(machine_check, 0x200, 0x100)
EXC_VIRT_NONE(0x4200, 0x100)
-TRAMP_REAL_BEGIN(machine_check_common_early)
- EXCEPTION_PROLOG_1 EXC_STD, PACA_EXMC, 0, 0x200, 0, 0, 0
+
+EXC_COMMON_BEGIN(machine_check_early_common)
+ mtctr r10 /* Restore ctr */
+ mfspr r11,SPRN_SRR0
+ mfspr r12,SPRN_SRR1
+
/*
- * Register contents:
- * R13 = PACA
- * R9 = CR
- * Original R9 to R13 is saved on PACA_EXMC
- *
* Switch to mc_emergency stack and handle re-entrancy (we limit
* the nested MCE upto level 4 to avoid stack overflow).
* Save MCE registers srr1, srr0, dar and dsisr and then set ME=1
@@ -965,32 +971,30 @@ TRAMP_REAL_BEGIN(machine_check_common_early)
* the machine check is handled then the idle wakeup code is called
* to restore state.
*/
- mr r11,r1 /* Save r1 */
lhz r10,PACA_IN_MCE(r13)
cmpwi r10,0 /* Are we in nested machine check */
- bne 0f /* Yes, we are. */
- /* First machine check entry */
- ld r1,PACAMCEMERGSP(r13) /* Use MC emergency stack */
-0: subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
+ cmpwi cr1,r10,MAX_MCE_DEPTH /* Are we at maximum nesting */
addi r10,r10,1 /* increment paca->in_mce */
sth r10,PACA_IN_MCE(r13)
+
+ mr r10,r1 /* Save r1 */
+ bne 1f
+ /* First machine check entry */
+ ld r1,PACAMCEMERGSP(r13) /* Use MC emergency stack */
+1: subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
/* Limit nested MCE to level 4 to avoid stack overflow */
- cmpwi r10,MAX_MCE_DEPTH
- bgt 2f /* Check if we hit limit of 4 */
- std r11,GPR1(r1) /* Save r1 on the stack. */
- std r11,0(r1) /* make stack chain pointer */
- mfspr r11,SPRN_SRR0 /* Save SRR0 */
- std r11,_NIP(r1)
- mfspr r11,SPRN_SRR1 /* Save SRR1 */
- std r11,_MSR(r1)
- mfspr r11,SPRN_DAR /* Save DAR */
- std r11,_DAR(r1)
- mfspr r11,SPRN_DSISR /* Save DSISR */
- std r11,_DSISR(r1)
- std r9,_CCR(r1) /* Save CR in stackframe */
+ bge cr1,2f /* Check if we hit limit of 4 */
+
+ EXCEPTION_PROLOG_COMMON_1()
/* We don't touch AMR here, we never go to virtual mode */
- /* Save r9 through r13 from EXMC save area to stack frame. */
EXCEPTION_PROLOG_COMMON_2(PACA_EXMC)
+ EXCEPTION_PROLOG_COMMON_3(0x200)
+
+ ld r3,PACA_EXMC+EX_DAR(r13)
+ lwz r4,PACA_EXMC+EX_DSISR(r13)
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+
mfmsr r11 /* get MSR value */
BEGIN_FTR_SECTION
ori r11,r11,MSR_ME /* turn on ME bit */
@@ -1016,8 +1020,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
#ifdef CONFIG_PPC_PSERIES
TRAMP_REAL_BEGIN(machine_check_fwnmi)
+ /* See comment at machine_check exception, don't turn on RI */
EXCEPTION_PROLOG_0 PACA_EXMC
- b machine_check_common_early
+ EXCEPTION_PROLOG_1 EXC_STD, PACA_EXMC, 0, 0x200, 1, 1, 0
+ mfctr r10 /* save ctr */
+ BRANCH_TO_C000(r11, machine_check_early_common)
#endif
TRAMP_KVM_SKIP(PACA_EXMC, 0x200)
@@ -1088,8 +1095,6 @@ EXC_COMMON_BEGIN(machine_check_idle_common)
* ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
*/
EXC_COMMON_BEGIN(machine_check_handle_early)
- std r0,GPR0(r1) /* Save r0 */
- EXCEPTION_PROLOG_COMMON_3(0x200)
bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl machine_check_early
@@ -1180,14 +1185,10 @@ BEGIN_FTR_SECTION
mtspr SPRN_CFAR,r10
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
MACHINE_CHECK_HANDLER_WINDUP
+ /* See comment at machine_check exception, don't turn on RI */
EXCEPTION_PROLOG_0 PACA_EXMC
EXCEPTION_PROLOG_1 EXC_STD, PACA_EXMC, 1, 0x200, 1, 1, 0
EXCEPTION_PROLOG_2_REAL machine_check_common, EXC_STD, 0
- /*
- * MSR_RI is not enabled, because PACA_EXMC is being used, so a
- * nested machine check corrupts it. machine_check_common enables
- * MSR_RI.
- */
EXC_COMMON_BEGIN(unrecover_mce)
/* Invoke machine_check_exception to print MCE event and panic. */
--
2.20.1
More information about the Linuxppc-dev
mailing list