[RFC PATCH v2 09/12] powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
Ravi Bangoria
ravi.bangoria at linux.ibm.com
Wed Jul 3 12:52:59 AEST 2019
On 6/28/19 9:17 PM, Christophe Leroy wrote:
> diff --git a/arch/powerpc/kernel/ptrace/ptrace-adv.c b/arch/powerpc/kernel/ptrace/ptrace-adv.c
> new file mode 100644
> index 000000000000..86e71fa6c5c8
> --- /dev/null
> +++ b/arch/powerpc/kernel/ptrace/ptrace-adv.c
> @@ -0,0 +1,487 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +
> +#include <linux/kernel.h>
> +#include <linux/sched.h>
> +#include <linux/mm.h>
> +#include <linux/smp.h>
> +#include <linux/errno.h>
> +#include <linux/ptrace.h>
> +#include <linux/regset.h>
> +#include <linux/tracehook.h>
> +#include <linux/elf.h>
> +#include <linux/user.h>
> +#include <linux/security.h>
> +#include <linux/signal.h>
> +#include <linux/seccomp.h>
> +#include <linux/audit.h>
> +#include <trace/syscall.h>
> +#include <linux/hw_breakpoint.h>
> +#include <linux/perf_event.h>
> +#include <linux/context_tracking.h>
> +#include <linux/nospec.h>
> +
> +#include <linux/uaccess.h>
> +#include <linux/pkeys.h>
> +#include <asm/page.h>
> +#include <asm/pgtable.h>
> +#include <asm/switch_to.h>
> +#include <asm/tm.h>
> +#include <asm/asm-prototypes.h>
> +#include <asm/debug.h>
> +#include <asm/hw_breakpoint.h>
> +
> +#include <kernel/ptrace/ptrace-decl.h>
> +
> +void user_enable_single_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL) {
> + task->thread.debug.dbcr0 &= ~DBCR0_BT;
> + task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
> + regs->msr |= MSR_DE;
> + }
> + set_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +void user_enable_block_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL) {
> + task->thread.debug.dbcr0 &= ~DBCR0_IC;
> + task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
> + regs->msr |= MSR_DE;
> + }
> + set_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +void user_disable_single_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL) {
> + /*
> + * The logic to disable single stepping should be as
> + * simple as turning off the Instruction Complete flag.
> + * And, after doing so, if all debug flags are off, turn
> + * off DBCR0(IDM) and MSR(DE) .... Torez
> + */
> + task->thread.debug.dbcr0 &= ~(DBCR0_IC|DBCR0_BT);
> + /*
> + * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
> + */
> + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
> + task->thread.debug.dbcr1)) {
> + /*
> + * All debug events were off.....
> + */
> + task->thread.debug.dbcr0 &= ~DBCR0_IDM;
> + regs->msr &= ~MSR_DE;
> + }
> + }
> + clear_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
> +{
> + /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
> + * For embedded processors we support one DAC and no IAC's at the
> + * moment.
> + */
I guess mentioning DABR and IABR doesn't make sense in ptrace-adv.c?
> + if (addr > 0)
> + return -EINVAL;
> +
> + /* The bottom 3 bits in dabr are flags */
Same here.
> + if ((data & ~0x7UL) >= TASK_SIZE)
> + return -EIO;
> +
> + /* As described above, it was assumed 3 bits were passed with the data
> + * address, but we will assume only the mode bits will be passed
> + * as to not cause alignment restrictions for DAC-based processors.
> + */
> +
> + /* DAC's hold the whole address without any mode flags */
> + task->thread.debug.dac1 = data & ~0x3UL;
> +
> + if (task->thread.debug.dac1 == 0) {
> + dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
> + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
> + task->thread.debug.dbcr1)) {
> + task->thread.regs->msr &= ~MSR_DE;
> + task->thread.debug.dbcr0 &= ~DBCR0_IDM;
> + }
> + return 0;
> + }
> +
> + /* Read or Write bits must be set */
> +
> + if (!(data & 0x3UL))
> + return -EINVAL;
> +
> + /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
> + register */
> + task->thread.debug.dbcr0 |= DBCR0_IDM;
> +
> + /* Check for write and read flags and set DBCR0
> + accordingly */
> + dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W);
> + if (data & 0x1UL)
> + dbcr_dac(task) |= DBCR_DAC1R;
> + if (data & 0x2UL)
> + dbcr_dac(task) |= DBCR_DAC1W;
> + task->thread.regs->msr |= MSR_DE;
> + return 0;
> +}
> +
> +static long set_instruction_bp(struct task_struct *child,
> + struct ppc_hw_breakpoint *bp_info)
> +{
> + int slot;
> + int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
> + int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
> + int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
> + int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
> +
> + if (dbcr_iac_range(child) & DBCR_IAC12MODE)
> + slot2_in_use = 1;
> + if (dbcr_iac_range(child) & DBCR_IAC34MODE)
> + slot4_in_use = 1;
> +
> + if (bp_info->addr >= TASK_SIZE)
> + return -EIO;
> +
> + if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
> +
> + /* Make sure range is valid. */
> + if (bp_info->addr2 >= TASK_SIZE)
> + return -EIO;
> +
> + /* We need a pair of IAC regsisters */
> + if ((!slot1_in_use) && (!slot2_in_use)) {
> + slot = 1;
> + child->thread.debug.iac1 = bp_info->addr;
> + child->thread.debug.iac2 = bp_info->addr2;
> + child->thread.debug.dbcr0 |= DBCR0_IAC1;
> + if (bp_info->addr_mode ==
> + PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> + dbcr_iac_range(child) |= DBCR_IAC12X;
> + else
> + dbcr_iac_range(child) |= DBCR_IAC12I;
> +#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> + } else if ((!slot3_in_use) && (!slot4_in_use)) {
> + slot = 3;
> + child->thread.debug.iac3 = bp_info->addr;
> + child->thread.debug.iac4 = bp_info->addr2;
> + child->thread.debug.dbcr0 |= DBCR0_IAC3;
> + if (bp_info->addr_mode ==
> + PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> + dbcr_iac_range(child) |= DBCR_IAC34X;
> + else
> + dbcr_iac_range(child) |= DBCR_IAC34I;
> +#endif
> + } else
> + return -ENOSPC;
> + } else {
> + /* We only need one. If possible leave a pair free in
> + * case a range is needed later
> + */
> + if (!slot1_in_use) {
> + /*
> + * Don't use iac1 if iac1-iac2 are free and either
> + * iac3 or iac4 (but not both) are free
> + */
> + if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
> + slot = 1;
> + child->thread.debug.iac1 = bp_info->addr;
> + child->thread.debug.dbcr0 |= DBCR0_IAC1;
> + goto out;
> + }
> + }
> + if (!slot2_in_use) {
> + slot = 2;
> + child->thread.debug.iac2 = bp_info->addr;
> + child->thread.debug.dbcr0 |= DBCR0_IAC2;
> +#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> + } else if (!slot3_in_use) {
> + slot = 3;
> + child->thread.debug.iac3 = bp_info->addr;
> + child->thread.debug.dbcr0 |= DBCR0_IAC3;
> + } else if (!slot4_in_use) {
> + slot = 4;
> + child->thread.debug.iac4 = bp_info->addr;
> + child->thread.debug.dbcr0 |= DBCR0_IAC4;
> +#endif
> + } else
> + return -ENOSPC;
> + }
> +out:
> + child->thread.debug.dbcr0 |= DBCR0_IDM;
> + child->thread.regs->msr |= MSR_DE;
> +
> + return slot;
> +}
> +
> +static int del_instruction_bp(struct task_struct *child, int slot)
> +{
> + switch (slot) {
> + case 1:
> + if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
> + return -ENOENT;
> +
> + if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
> + /* address range - clear slots 1 & 2 */
> + child->thread.debug.iac2 = 0;
> + dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
> + }
> + child->thread.debug.iac1 = 0;
> + child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
> + break;
> + case 2:
> + if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
> + return -ENOENT;
> +
> + if (dbcr_iac_range(child) & DBCR_IAC12MODE)
> + /* used in a range */
> + return -EINVAL;
> + child->thread.debug.iac2 = 0;
> + child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
> + break;
> +#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> + case 3:
> + if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
> + return -ENOENT;
> +
> + if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
> + /* address range - clear slots 3 & 4 */
> + child->thread.debug.iac4 = 0;
> + dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
> + }
> + child->thread.debug.iac3 = 0;
> + child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
> + break;
> + case 4:
> + if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
> + return -ENOENT;
> +
> + if (dbcr_iac_range(child) & DBCR_IAC34MODE)
> + /* Used in a range */
> + return -EINVAL;
> + child->thread.debug.iac4 = 0;
> + child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
> + break;
> +#endif
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
> +{
> + int byte_enable =
> + (bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
> + & 0xf;
> + int condition_mode =
> + bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
> + int slot;
> +
> + if (byte_enable && (condition_mode == 0))
> + return -EINVAL;
> +
> + if (bp_info->addr >= TASK_SIZE)
> + return -EIO;
> +
> + if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
> + slot = 1;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> + dbcr_dac(child) |= DBCR_DAC1R;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> + dbcr_dac(child) |= DBCR_DAC1W;
> + child->thread.debug.dac1 = (unsigned long)bp_info->addr;
> +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> + if (byte_enable) {
> + child->thread.debug.dvc1 =
> + (unsigned long)bp_info->condition_value;
> + child->thread.debug.dbcr2 |=
> + ((byte_enable << DBCR2_DVC1BE_SHIFT) |
> + (condition_mode << DBCR2_DVC1M_SHIFT));
> + }
> +#endif
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> + } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
> + /* Both dac1 and dac2 are part of a range */
> + return -ENOSPC;
> +#endif
> + } else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
> + slot = 2;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> + dbcr_dac(child) |= DBCR_DAC2R;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> + dbcr_dac(child) |= DBCR_DAC2W;
> + child->thread.debug.dac2 = (unsigned long)bp_info->addr;
> +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> + if (byte_enable) {
> + child->thread.debug.dvc2 =
> + (unsigned long)bp_info->condition_value;
> + child->thread.debug.dbcr2 |=
> + ((byte_enable << DBCR2_DVC2BE_SHIFT) |
> + (condition_mode << DBCR2_DVC2M_SHIFT));
> + }
> +#endif
> + } else
> + return -ENOSPC;
> + child->thread.debug.dbcr0 |= DBCR0_IDM;
> + child->thread.regs->msr |= MSR_DE;
> +
> + return slot + 4;
> +}
> +
> +static int del_dac(struct task_struct *child, int slot)
> +{
> + if (slot == 1) {
> + if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
> + return -ENOENT;
> +
> + child->thread.debug.dac1 = 0;
> + dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
> + child->thread.debug.dac2 = 0;
> + child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
> + }
> + child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
> +#endif
> +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> + child->thread.debug.dvc1 = 0;
> +#endif
> + } else if (slot == 2) {
> + if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
> + return -ENOENT;
> +
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
> + /* Part of a range */
> + return -EINVAL;
> + child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
> +#endif
> +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> + child->thread.debug.dvc2 = 0;
> +#endif
> + child->thread.debug.dac2 = 0;
> + dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
> + } else
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> +static int set_dac_range(struct task_struct *child,
> + struct ppc_hw_breakpoint *bp_info)
> +{
> + int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
> +
> + /* We don't allow range watchpoints to be used with DVC */
> + if (bp_info->condition_mode)
> + return -EINVAL;
> +
> + /*
> + * Best effort to verify the address range. The user/supervisor bits
> + * prevent trapping in kernel space, but let's fail on an obvious bad
> + * range. The simple test on the mask is not fool-proof, and any
> + * exclusive range will spill over into kernel space.
> + */
> + if (bp_info->addr >= TASK_SIZE)
> + return -EIO;
> + if (mode == PPC_BREAKPOINT_MODE_MASK) {
> + /*
> + * dac2 is a bitmask. Don't allow a mask that makes a
> + * kernel space address from a valid dac1 value
> + */
> + if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
> + return -EIO;
> + } else {
> + /*
> + * For range breakpoints, addr2 must also be a valid address
> + */
> + if (bp_info->addr2 >= TASK_SIZE)
> + return -EIO;
> + }
> +
> + if (child->thread.debug.dbcr0 &
> + (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
> + return -ENOSPC;
> +
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> + child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> + child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
> + child->thread.debug.dac1 = bp_info->addr;
> + child->thread.debug.dac2 = bp_info->addr2;
> + if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
> + child->thread.debug.dbcr2 |= DBCR2_DAC12M;
> + else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> + child->thread.debug.dbcr2 |= DBCR2_DAC12MX;
> + else /* PPC_BREAKPOINT_MODE_MASK */
> + child->thread.debug.dbcr2 |= DBCR2_DAC12MM;
> + child->thread.regs->msr |= MSR_DE;
> +
> + return 5;
> +}
> +#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
> +
> +long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
> +{
> + if (bp_info->version != 1)
> + return -ENOTSUPP;
> + /*
> + * Check for invalid flags and combinations
> + */
> + if ((bp_info->trigger_type == 0) ||
> + (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
> + PPC_BREAKPOINT_TRIGGER_RW)) ||
> + (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
> + (bp_info->condition_mode &
> + ~(PPC_BREAKPOINT_CONDITION_MODE |
> + PPC_BREAKPOINT_CONDITION_BE_ALL)))
> + return -EINVAL;
> +#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
> + if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
> + return -EINVAL;
> +#endif
> +
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
> + if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
> + (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
> + return -EINVAL;
> + return set_instruction_bp(child, bp_info);
> + }
> + if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
> + return set_dac(child, bp_info);
> +
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> + return set_dac_range(child, bp_info);
> +#else
> + return -EINVAL;
> +#endif
> +}
> +
> +long ppc_del_hwdebug(struct task_struct *child, long data)
> +{
> + int rc;
> +
> + if (data <= 4)
> + rc = del_instruction_bp(child, (int)data);
> + else
> + rc = del_dac(child, (int)data - 4);
> +
> + if (!rc) {
> + if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
> + child->thread.debug.dbcr1)) {
> + child->thread.debug.dbcr0 &= ~DBCR0_IDM;
> + child->thread.regs->msr &= ~MSR_DE;
> + }
> + }
> + return rc;
> +}
> diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
> index e12f6615fc1d..bdba09a87aea 100644
> --- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
> +++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
> @@ -174,3 +174,8 @@ int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
> /* ptrace-view */
>
> extern const struct user_regset_view user_ppc_native_view;
> +
> +/* ptrace-(no)adv */
> +int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data);
> +long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info);
> +long ppc_del_hwdebug(struct task_struct *child, long data);
> diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
> new file mode 100644
> index 000000000000..7db330c94538
> --- /dev/null
> +++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
ptrace-noadv.c looks good to me.
More information about the Linuxppc-dev
mailing list