[PATCH v2 2/2] fsl: add i2c controlled qixis driver

Pankaj Bansal pankaj.bansal at nxp.com
Wed Jan 30 22:34:31 AEDT 2019


FPGA on LX2160AQDS/LX2160ARDB connected on I2C bus, so add qixis
driver which is basically an i2c client driver to control FPGA.

Signed-off-by: Wang Dongsheng <dongsheng.wang at freescale.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal at nxp.com>
---

Notes:
    V2:
    - Modify the driver to not create platform devices corresponding to subnodes.
      because the subnodes are not actual devices.
    - Use mdio_mux_regmap_init/mdio_mux_regmap_uninit
    - Remove header file from include folder, as no qixis api is called from outside
    - Add regmap_exit in driver's remove function
    Dendencies:
	- https://www.mail-archive.com/netdev@vger.kernel.org/msg281274.html

 drivers/soc/fsl/Kconfig      |   8 +++
 drivers/soc/fsl/Makefile     |   1 +
 drivers/soc/fsl/qixis_ctrl.c | 121 +++++++++++++++++++++++++++++++++
 3 files changed, 130 insertions(+)

diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index 8a0ba6da6f8a..e787d3e637a4 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -36,6 +36,14 @@ config FSL_SLEEP_FSM
 	  The FSM is used to finish clean-ups at the last stage of system entering deep
 	  sleep, and also wakes up system when a wake up event happens.
 
+config FSL_QIXIS
+	tristate "QIXIS system controller driver"
+	depends on REGMAP_I2C
+	default n
+	help
+	  Say y here to enable QIXIS system controller api. The qixis driver
+	  provides FPGA functions to control system.
+
 if ARM || ARM64
 source "drivers/soc/fsl/Kconfig.arm"
 endif
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index ffdf93b34501..db7b09bfbd91 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_FSL_DPAA)                 += qbman/
 obj-$(CONFIG_QUICC_ENGINE)		+= qe/
 obj-$(CONFIG_CPM)			+= qe/
+obj-$(CONFIG_FSL_QIXIS) 		+= qixis_ctrl.o
 obj-$(CONFIG_FSL_GUTS)			+= guts.o
 obj-$(CONFIG_FSL_MC_DPIO) 		+= dpio/
 obj-$(CONFIG_FSL_LS2_CONSOLE)		+= ls2-console/
diff --git a/drivers/soc/fsl/qixis_ctrl.c b/drivers/soc/fsl/qixis_ctrl.c
new file mode 100644
index 000000000000..336f366e228e
--- /dev/null
+++ b/drivers/soc/fsl/qixis_ctrl.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/* Freescale QIXIS system controller driver.
+ *
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mdio-mux.h>
+
+/* QIXIS MAP */
+struct fsl_qixis_regs {
+	u8		id;		/* Identification Registers */
+	u8		version;	/* Version Register */
+	u8		qixis_ver;	/* QIXIS Version Register */
+	u8		reserved1[0x1f];
+};
+
+struct mdio_mux_data {
+	void			*data;
+	struct list_head	link;
+};
+
+struct qixis_priv {
+	struct regmap		*regmap;
+	struct list_head	mdio_mux_list;
+};
+
+static struct regmap_config qixis_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int fsl_qixis_i2c_probe(struct i2c_client *client)
+{
+	struct device_node *child;
+	struct qixis_priv *priv;
+	int ret;
+	u32 qver;
+	struct mdio_mux_data *mux_data;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EOPNOTSUPP;
+
+	priv = devm_kzalloc(&client->dev, sizeof(struct qixis_priv),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = regmap_init_i2c(client, &qixis_regmap_config);
+	INIT_LIST_HEAD(&priv->mdio_mux_list);
+
+	regmap_read(priv->regmap, offsetof(struct fsl_qixis_regs, qixis_ver),
+		    &qver);
+	pr_info("Freescale QIXIS Version: 0x%08x\n", qver);
+
+	for_each_child_of_node(client->dev.of_node, child) {
+		if (of_node_name_prefix(child, "mdio-mux")) {
+			mux_data = devm_kzalloc(&client->dev,
+						sizeof(struct mdio_mux_data),
+						GFP_KERNEL);
+			if (!mux_data)
+				return -ENOMEM;
+			ret = mdio_mux_regmap_init(&client->dev, child,
+						   &mux_data->data);
+			if (ret)
+				return ret;
+			list_add(&mux_data->link, &priv->mdio_mux_list);
+		}
+	};
+
+	i2c_set_clientdata(client, priv);
+
+	return 0;
+}
+
+static int fsl_qixis_i2c_remove(struct i2c_client *client)
+{
+	struct qixis_priv *priv;
+	struct list_head *pos;
+	struct mdio_mux_data *mux_data;
+
+	priv = i2c_get_clientdata(client);
+	list_for_each(pos, &priv->mdio_mux_list) {
+		mux_data = list_entry(pos, struct mdio_mux_data, link);
+		mdio_mux_regmap_uninit(mux_data->data);
+	}
+	regmap_exit(priv->regmap);
+
+	return 0;
+}
+
+static const struct of_device_id fsl_qixis_of_match[] = {
+	{ .compatible = "fsl,fpga-qixis-i2c" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, fsl_qixis_of_match);
+
+static struct i2c_driver fsl_qixis_i2c_driver = {
+	.driver = {
+		.name	= "qixis_ctrl",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(fsl_qixis_of_match),
+	},
+	.probe_new	= fsl_qixis_i2c_probe,
+	.remove		= fsl_qixis_i2c_remove,
+};
+module_i2c_driver(fsl_qixis_i2c_driver);
+
+MODULE_AUTHOR("Wang Dongsheng <dongsheng.wang at freescale.com>");
+MODULE_DESCRIPTION("Freescale QIXIS system controller driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1



More information about the Linuxppc-dev mailing list