[PATCH] pseries/hotplug: Add more delay in pseries_cpu_die while waiting for rtas-stop

[Gautham R Shenoy]

Hello Michael,

On Mon, Jan 14, 2019 at 12:11:44PM -0600, Michael Bringmann wrote:
> On 1/9/19 12:08 AM, Gautham R Shenoy wrote:
> 
> > I did some testing during the holidays. Here are the observations:
> > 
> > 1) With just your patch (without any additional debug patch), if I run
> > DLPAR on /off operations on a system that has SMT=off, I am able to
> > see a crash involving RTAS stack corruption within an hour's time.
> > 
> > 2) With the debug patch (appended below) which has additional debug to
> > capture the callers of stop-self, start-cpu, set-power-levels, the
> > system is able to perform DLPAR on/off operations on a system with
> > SMT=off for three days. And then, it crashed with the dead CPU showing
> > a "Bad kernel stack pointer". From this log, I can clearly
> > see that there were no concurrent calls to stop-self, start-cpu,
> > set-power-levels. The only concurrent RTAS calls were the dying CPU
> > calling "stop-self", and the CPU running the DLPAR operation calling
> > "query-cpu-stopped-state". The crash signature is appended below as
> > well.
> > 
> > 3) Modifying your patch to remove the udelay and increase the loop
> > count from 25 to 1000 doesn't improve the situation. We are still able
> > to see the crash.
> > 
> > 4) With my patch, even without any additional debug, I was able to
> > observe the system run the tests successfully for over a week (I
> > started the tests before the Christmas weekend, and forgot to turn it
> > off!)
> 
> So does this mean that the problem is fixed with your patch?

No. On the contrary I think my patch unable to exploit the possible
race window.  From a technical point of view, Thiago's patch does the
right things

  - It waits for the target CPU to come out of CEDE and set its state
    to CPU_STATE_OFFLINE.
  
  - Only then it then makes the "query-cpu-stopped-state" rtas call in
    a loop, while giving sufficient delay between successive
    queries. This reduces the unnecessary rtas-calls.

In my patch, I don't do any of this, but simply keep calling
"query-cpu-stopped-state" call in a loop for 4000 iterations.

That said, if I incorporate the wait for the target CPU to set its
state to CPU_STATE_OFFLINE in my patch and then make the
"query-cpu-stopped-state" rtas call, then, even I am able to get the
crash with the "RTAS CALL BUFFER CORRUPTION" message.

I think that incorporating the wait for the target CPU set its state
to CPU_STATE_OFFLINE increases the probability that
"query-cpu-stopped-state" and "stop-self" rtas calls get called more
or less at the same time. However since concurrent invocations of
these rtas-calls is allowed by the PAPR, it should not result in a
"RTAS CALL BUFFER CORRUPTION". Am I missing something here ?

> 
> > 
> > It appears that there is a narrow race window involving rtas-stop-self
> > and rtas-query-cpu-stopped-state calls that can be observed with your
> > patch. Adding any printk's seems to reduce the probability of hitting
> > this race window. It might be worth the while to check with RTAS
> > folks, if they suspect something here.
> 
> What would the RTAS folks be looking at here?  The 'narrow race window'
> is with respect to a patch that it sound like we should not be
> using.

IMHO, if the race-window exists, it would be better to confirm and fix
it, given that we have a patch that can exploit it consistently.

> 
> Thanks.
> Michael
> 
> -- 
> Michael W. Bringmann
> Linux Technology Center
> IBM Corporation
> Tie-Line  363-5196
> External: (512) 286-5196
> Cell:       (512) 466-0650
> mwb at linux.vnet.ibm.com

--
Thanks and Regards
gautham.